Garmin Nuvi 200 Speaker Replacement
Garmin Nuvi 200 Speaker Replacement
Garmin Nuvi 200 Speaker Replacement Written By: Anjelica
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Garmin Nuvi 200 Speaker Replacement
INTRODUCTION Replacing the speaker in a Garmin Nuvi 200.
TOOLS: Phillips #00 Screwdriver (1) T5 Torx Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Garmin Nuvi 200 Speaker Replacement
Step 1 — Rear Casing
Peel off the sticker from the bottom of the device to reveal two screws.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove two T5 Torx screws.
Page 3 of 5
Garmin Nuvi 200 Speaker Replacement
Step 3
Insert a plastic opening tool in the gap between the front and rear casing.
Carefully work the tool around the gap, separating the two halves of the case.
Keep the power switch in place while removing the rear case. Step 4 — Speaker
© iFixit — CC BY-NC-SA
www.iFixit.com
Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.
Page 4 of 5
Garmin Nuvi 200 Speaker Replacement
Step 5
Pull the cable out to detach the speaker from the logic board.
Step 6
Wedge the iPod opener into the space between the speaker and the case.
Apply pressure to pry the speaker away from the case.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-23 11:03:07 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Garmin Nuvi 200 Speaker Replacement Written By: Anjelica
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Garmin Nuvi 200 Speaker Replacement
INTRODUCTION Replacing the speaker in a Garmin Nuvi 200.
TOOLS: Phillips #00 Screwdriver (1) T5 Torx Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Garmin Nuvi 200 Speaker Replacement
Step 1 — Rear Casing
Peel off the sticker from the bottom of the device to reveal two screws.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove two T5 Torx screws.
Page 3 of 5
Garmin Nuvi 200 Speaker Replacement
Step 3
Insert a plastic opening tool in the gap between the front and rear casing.
Carefully work the tool around the gap, separating the two halves of the case.
Keep the power switch in place while removing the rear case. Step 4 — Speaker
© iFixit — CC BY-NC-SA
www.iFixit.com
Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.
Page 4 of 5
Garmin Nuvi 200 Speaker Replacement
Step 5
Pull the cable out to detach the speaker from the logic board.
Step 6
Wedge the iPod opener into the space between the speaker and the case.
Apply pressure to pry the speaker away from the case.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-23 11:03:07 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
