Gateway NV52 WiFi Card Replacement

Gateway NV52 WiFi Card Replacement

Gateway NV52 WiFi Card Replacement Use this guide to replace a WiFi card on a Gateway NV52.

Written By: Ruben

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Gateway NV52 WiFi Card Replacement

INTRODUCTION The only prerequisite for the WiFi card is the Base Cover.

TOOLS: Phillips #0 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Gateway NV52 WiFi Card Replacement

Step 1 — Base Cover 

Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.



Lift up the base cover from the the top with your hands to a 90 degree angle.



Remove the base cover and place it in a safe and dry place.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Gateway NV52 WiFi Card Replacement

Step 3 — WiFi Card 

Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.



Locate the black and white cables attached to the WiFi card.



Gently wiggle the black cable until it detaches from the WiFi card.



Repeat the previous step for the white cable.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Gateway NV52 WiFi Card Replacement

Step 5 

Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-13 07:30:28 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5