generators - Access Hire Australia
GENERATORS AUSTRALIA
D400/S SPECIFICATIONS 500kVA STANDARD
German Technology. Australian Design. Powered by
GENERAL Model
D400/S
Power Type
Diesel
Prime Power (kW/kVA)
400/500
Standby Power (kW/kVA)
440/550
ENGINE
n n n n n n n n n n n n n
FEATURES
50°C rated radiator Powder coated finish External fuel tank connections EVAC service points 110% bunded skid base All moving parts fitted with safety guards RCD MCB 2 x 3Ph 63amp 5 pin - IP66 IP65 electrical boxes dust and water proof Rated lifting lugs Emergency E stop State of the art control system - ComAp Remote monitoring Door safety interlocks
ASSEMBLY
Engine Make and Model
DEUTZ BF8M1015CP-LAG2
Engine Type
Water-cooled, in line, 4 stroke, 1500rpm
Engine Prime Power (kW)
448
Engine Standby Power (kW)
490
Fuel Tank Capacity (L)
825
Fuel Consumption (L/h)*
80
Battery Type
24V
Bore (mm) x Stroke (mm)
132 x 145
No. of Cylinders
8
Displacement (L)
15.874
Compression Ratio
17
Intake Model
Turbo intercooler
Speed Control System
Electronical speed governing
Lubricating Oil Capacity (L)
45
Lub Consumption (g/kW/h)
0.624
The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Antivibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.
*Fuel Consumption is based on 100% load
CONTROL SYSTEM
ALTERNATOR
ComAp The InteliGen ComAp Controller is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators. The InteliGen ComAp Controller monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are displayed on the LCD screen (multiple language options are available), illuminated LED audible sounder.
Model
SLG54D1, single bearing IP22
Frequency (Hz)
50
Continuous Output (kW/kVA)
400/500
Power Efficiency
91.0%
Type
4 pole, rotating field
Exciter Type
Brushless, self excited
Voltage Regulator
AS440
Voltage Regulation
+1.0%
No. of Phases
3 phases, 4 wire
Insulation
Class H
Protection
IP22
Rated Power Factor
0.8
Stator Winding
Double layer concentric
Winding Pitch
Two thirds
Winding Leads
12
Waveform Distortion
No load
D400/S SPECIFICATIONS 500kVA STANDARD
German Technology. Australian Design. Powered by
GENERAL Model
D400/S
Power Type
Diesel
Prime Power (kW/kVA)
400/500
Standby Power (kW/kVA)
440/550
ENGINE
n n n n n n n n n n n n n
FEATURES
50°C rated radiator Powder coated finish External fuel tank connections EVAC service points 110% bunded skid base All moving parts fitted with safety guards RCD MCB 2 x 3Ph 63amp 5 pin - IP66 IP65 electrical boxes dust and water proof Rated lifting lugs Emergency E stop State of the art control system - ComAp Remote monitoring Door safety interlocks
ASSEMBLY
Engine Make and Model
DEUTZ BF8M1015CP-LAG2
Engine Type
Water-cooled, in line, 4 stroke, 1500rpm
Engine Prime Power (kW)
448
Engine Standby Power (kW)
490
Fuel Tank Capacity (L)
825
Fuel Consumption (L/h)*
80
Battery Type
24V
Bore (mm) x Stroke (mm)
132 x 145
No. of Cylinders
8
Displacement (L)
15.874
Compression Ratio
17
Intake Model
Turbo intercooler
Speed Control System
Electronical speed governing
Lubricating Oil Capacity (L)
45
Lub Consumption (g/kW/h)
0.624
The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Antivibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.
*Fuel Consumption is based on 100% load
CONTROL SYSTEM
ALTERNATOR
ComAp The InteliGen ComAp Controller is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators. The InteliGen ComAp Controller monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. System alarms are displayed on the LCD screen (multiple language options are available), illuminated LED audible sounder.
Model
SLG54D1, single bearing IP22
Frequency (Hz)
50
Continuous Output (kW/kVA)
400/500
Power Efficiency
91.0%
Type
4 pole, rotating field
Exciter Type
Brushless, self excited
Voltage Regulator
AS440
Voltage Regulation
+1.0%
No. of Phases
3 phases, 4 wire
Insulation
Class H
Protection
IP22
Rated Power Factor
0.8
Stator Winding
Double layer concentric
Winding Pitch
Two thirds
Winding Leads
12
Waveform Distortion
No load
