Gigabyte P34G Solid State Drive Replacement
Gigabyte P34G Solid State Drive Replacement
Gigabyte P34G Solid State Drive Replacement This guide will teach you how to open up the P34G and replace the solid state drive.
Written By: yeunghayden
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Gigabyte P34G Solid State Drive Replacement
INTRODUCTION The solid state drive stores some of the computer's files and has limited space. Replacement of the solid state drive is necessary if it is broken or there is no space left. Make sure you are grounded before starting. To ground yourself, simply touch a metal object that is in contact with the floor for a few seconds.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
Compatible Solid State Drive (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Gigabyte P34G Solid State Drive Replacement
Step 1 — Solid State Drive
Remove all 15 marked screws on the underside of the laptop using a #0 screwdriver.
There are three different sized screws.
x1 9.8mm Screw
x8 5.6mm Screws
x6 5.0mm Screws
Divide the screws by size and save them in a safe space for reassembly later.
Step 2
Unscrew the marked 4.5mm screw with a #0 screwdriver.
Set the screw aside to use for reassembly after replacing the solid state drive.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Gigabyte P34G Solid State Drive Replacement
Step 3
Carefully pull the solid state drive in the direction shown to disconnect it from the port.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-07 02:30:08 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Gigabyte P34G Solid State Drive Replacement This guide will teach you how to open up the P34G and replace the solid state drive.
Written By: yeunghayden
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Gigabyte P34G Solid State Drive Replacement
INTRODUCTION The solid state drive stores some of the computer's files and has limited space. Replacement of the solid state drive is necessary if it is broken or there is no space left. Make sure you are grounded before starting. To ground yourself, simply touch a metal object that is in contact with the floor for a few seconds.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
Compatible Solid State Drive (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Gigabyte P34G Solid State Drive Replacement
Step 1 — Solid State Drive
Remove all 15 marked screws on the underside of the laptop using a #0 screwdriver.
There are three different sized screws.
x1 9.8mm Screw
x8 5.6mm Screws
x6 5.0mm Screws
Divide the screws by size and save them in a safe space for reassembly later.
Step 2
Unscrew the marked 4.5mm screw with a #0 screwdriver.
Set the screw aside to use for reassembly after replacing the solid state drive.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Gigabyte P34G Solid State Drive Replacement
Step 3
Carefully pull the solid state drive in the direction shown to disconnect it from the port.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-07 02:30:08 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
