GoPro Hero Motherboard Replacement AWS
GoPro Hero Motherboard Replacement
GoPro Hero Motherboard Replacement In this guide we will be replacing the motherboard, or main circuit board inside the GoPro Hero. Before you begin, make sure you have all the proper tools to allow for an easier fix.
撰写者: Zoe Tuggle
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 7 页
GoPro Hero Motherboard Replacement
工具:
章节:
Metal Spudger (1)
GoPro Hero Motherboard (1)
Phillips #000 Screwdriver (1)
GoPro Hero (2014) Screw Set (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 7 页
GoPro Hero Motherboard Replacement
步骤 1 — Casing
Power off your GoPro before beginning disassembly.
Unclip the black latch to the camera case and open the case.
Gently pry the back open by inserting a metal spudger between the case and back panel.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 7 页
GoPro Hero Motherboard Replacement
步骤 3
Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.
步骤 4
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 7 页
GoPro Hero Motherboard Replacement
步骤 5
Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
Make sure to keep track of these screws as they are very small.
步骤 6
© iFixit — CC BY-NC-SA
zh.iFixit.com
Carefully remove the motherboard and white plastic piece from the case.
5 / 7 页
GoPro Hero Motherboard Replacement
步骤 7 — Motherboard
Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.
Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.
步骤 8
Separate the white plastic piece from the motherboard.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 7 页
GoPro Hero Motherboard Replacement
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-03 09:02:03 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 7 页
GoPro Hero Motherboard Replacement In this guide we will be replacing the motherboard, or main circuit board inside the GoPro Hero. Before you begin, make sure you have all the proper tools to allow for an easier fix.
撰写者: Zoe Tuggle
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 7 页
GoPro Hero Motherboard Replacement
工具:
章节:
Metal Spudger (1)
GoPro Hero Motherboard (1)
Phillips #000 Screwdriver (1)
GoPro Hero (2014) Screw Set (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 7 页
GoPro Hero Motherboard Replacement
步骤 1 — Casing
Power off your GoPro before beginning disassembly.
Unclip the black latch to the camera case and open the case.
Gently pry the back open by inserting a metal spudger between the case and back panel.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 7 页
GoPro Hero Motherboard Replacement
步骤 3
Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.
步骤 4
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 7 页
GoPro Hero Motherboard Replacement
步骤 5
Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
Make sure to keep track of these screws as they are very small.
步骤 6
© iFixit — CC BY-NC-SA
zh.iFixit.com
Carefully remove the motherboard and white plastic piece from the case.
5 / 7 页
GoPro Hero Motherboard Replacement
步骤 7 — Motherboard
Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.
Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.
步骤 8
Separate the white plastic piece from the motherboard.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 7 页
GoPro Hero Motherboard Replacement
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-03 09:02:03 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 7 页
