Grace Digital Mondo Remote Circuit Board Replacement
Grace Digital Mondo Remote Circuit Board Replacement
Grace Digital Mondo Remote Circuit Board Replacement This guide will show you how to disassemble your remote in order to replace/fix any given components, including the circuit board.
Written By: Zachary Nelson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Grace Digital Mondo Remote Circuit Board Replacement
INTRODUCTION The replacement is a very simple fix to any problem you may have with your remote. All you need are your hands and plastic spudger to dissemble this remote.
TOOLS: Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Grace Digital Mondo Remote Circuit Board Replacement
Step 1 — Remote Circuit Board
Slide back the battery cover.
Remove the (2) AA batteries by prying upwards with a plastic spudger from the (+) terminals.
Step 2
Locate the (6) clips that hold together the remote.
Gently separate the cover with a plastic spudger.
Fully disengage the clips before beginning to gently pry open the remote. This might result in breaking the thin plastic shell and making the clips non-functional.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Grace Digital Mondo Remote Circuit Board Replacement This document was last generated on 2017-06-19 03:55:38 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Grace Digital Mondo Remote Circuit Board Replacement This guide will show you how to disassemble your remote in order to replace/fix any given components, including the circuit board.
Written By: Zachary Nelson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Grace Digital Mondo Remote Circuit Board Replacement
INTRODUCTION The replacement is a very simple fix to any problem you may have with your remote. All you need are your hands and plastic spudger to dissemble this remote.
TOOLS: Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Grace Digital Mondo Remote Circuit Board Replacement
Step 1 — Remote Circuit Board
Slide back the battery cover.
Remove the (2) AA batteries by prying upwards with a plastic spudger from the (+) terminals.
Step 2
Locate the (6) clips that hold together the remote.
Gently separate the cover with a plastic spudger.
Fully disengage the clips before beginning to gently pry open the remote. This might result in breaking the thin plastic shell and making the clips non-functional.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Grace Digital Mondo Remote Circuit Board Replacement This document was last generated on 2017-06-19 03:55:38 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
