grooved fire products - Anvil International
GROOVED FIRE PRODUCTS Price Sheet SPF.GRFP-5.14 | Effective: May 12, 2014 | Cancels Price Sheet SPF.GRFP-5.13 of May 28, 2013
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: • All orders are accepted on the basis of prices in effect at the time of shipment. • Prices apply only to Standard Sizes as listed in catalogs. •O n orders received for cartoned items in less than “carton (not container) quantities, “we reserve the right to adjust to the next carton quantity above the number of pieces shown on the order. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NORTHERN REGION CUSTOMER SERVICE CENTER
80 0 -301-2701
SOUTHERN REGION CUSTOMER SERVICE CENTER
www.anvilintl.com
80 0 - 451- 4 414
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
4. SELLER’S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
2
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Approvals For current certifications, listings and other approvals, visit Anvil’s website at www.anvilintl.com
Standard Gaskets - Your order must specify gasket grade TEMPERATURE RANGE
COMPOUND (COLOR STRIPE)
E
(type A)
Ambient -40°F to +150°F (-40°C to +66°C)
EPDM (Purple)
Applicable for wet and dry (oil free air) sprinkler services.
E
-40°F to +230°F (-40°C to +110°C)
EPDM (Green)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
EP
-40°F to +250°F
EPDM (Green and Red)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
GRADE
GENERAL SERVICE APPLICATION
Standard Gasket
Flush Gasket
Bolts / Nuts U-Bolts
Carbon steel SAE grade 2. Zinc electroplated to ASTM A-164.
Oval Neck Track Head Bolts
Heat-treated to conform to ASTM A-183 minimum tensile strength 110,000 PSI with yield point of 80,000 PSI. Zinc electroplated to ASTM A-164.
Heavy Hex Nuts
SAE J995 Grade 2 or ASTM A536 Grade “A” or “B”. Zinc Electroplated to ASTM A-164.
Hex Flange Lock Nuts
Carbon steel per ASTM A-194. Zinc electroplates to ASTM A-164.
Housings & Fittings ASTM A-536
All ductile iron housings and fittings meet or exceed material conforming to ASTM A-536.
ASTM A-53 or A-135
All segmentally welded fittings std weight except E-9 and K-9 is SCH 10.
ASTM 234 WPB/ASA B16.9 ASTM A53 or A135
Forged Steel Fittings.
ASTM A-312/A-312M
Stainless steel fittings grade TP304L or TP316L.
ANSI/ASME
All MT-1 mechanical tees are NPT standard conforming to ANSI-ASME B1.20.1.
BS 21
All MT-8 mechanical tees are British parallel joining threads.
Finish
All grooved coupling housings and fittings are finished with a rust inhibiting orange paint. Hot dipped galvanizing per ASTM A-153 is also available upon request.
ASME/ANSI B16.1
F-3 grooved flange adapter drilling conforms to ASME/ANSI B16.1 for class 125 cast iron flanges.
Revised:
www.anvilintl.com
3
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Table of Contents Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Approvals, Gasket Material, Bolts / Nuts, Housing & Fittings . . . . . . . . . . . . . . . . . . . . . . . . 3 Couplings / Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
C-1 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-3 LW Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-4 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RC-2 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 F-3 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fittings for Fire Protection (Short Body Fittings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SE-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ST-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fittings for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–15
E-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-2 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-3 22½° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-4 11¼° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-9 90° Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 K-9 Drain Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SE-5 90° Reducing Elbow (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SK-1 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 F-2 Flange Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 X-1 Steel Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-2 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 T-3 Reducing Tee (Threaded Branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 R-1 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 R-2 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 R-3 Concentric Reducer (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17
MT-1 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-2 Grooved Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-30 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts / Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Revised:
www.anvilintl.com
4
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter STYLE C-1 / C-3 (AMBIENT) LW FLEXIBLE COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 6 8 10 (C-1) 12 (C-1)
32 40 50 65 80 100 150 200 250 300
1.25 1.46 1.45 1.98 2.58 4.14 7.00 13.00 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 4¼ ⁷⁄₈ x 5½ ⁷⁄₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV. $11.00 $11.25 $12.75 $14.00
$16.75 $21.75 $37.50 $63.75 $236.25 $288.00
$13.50 $13.75 $15.00 $17.00 $20.00 $26.00 $44.75 $76.75 $296.50 $361.25
$13.00 $13.25 $14.25 $16.00 $19.50 $25.00 $43.00 $73.50 POA POA
$15.25 $15.75 $17.50 $19.75 $23.00 $30.00 $52.00 $88.25 POA POA
QUANTITY FOR “A” GASKET ONLY BOX CRATE 45 45 42 28 20 10 6 -
1,620 1,620 1,512 1,008 720 360 216 70 27 22
q — Sold in box only Standard Gasket
Flush Gasket
STYLE C-4 (AMBIENT) RIGID COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
Revised:
32 40 50 65 80 100 125 150 200 250 300
1.48 1.66 1.83 2.04 2.41 3.17 5.15 5.84 10.82 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ½x3 ½x3 ⁵ ⁄₈ x 3½ ⁷⁄₈ x 5 ⁷⁄₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV. $11.00 $11.25 $12.75 $14.00
$16.75 $21.75 $36.25 $37.50 $63.75 $190.75 $234.00
www.anvilintl.com
$13.50 $13.75 $15.00 $17.00 $20.00 $26.00 $43.50 $44.75 $76.75 $228.50 $281.00
$13.00 $13.25 $14.25 $16.00
$19.50 $25.00 $43.00 $73.50 -
$15.25 $15.75 $17.50 $19.75 $23.00 $30.00 $52.00 $88.25 -
QUANTITY FOR “A” GASKET ONLY BOX CRATE 40 40 30 28 20 10 7 6 -
1,440 1,440 1,080 1,008 720 360 252 216 80 27 22
5
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter STYLE RC-2 REDUCING COUPLING NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 x1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
50 x 40 65 x 50 80 x 50 80 x 65 100 x 50 100 x 65 100 x 80 125 x 100 150 x 100 200 x150
COUPLINGS COMPLETE WITH “E” GASKET PAINTED GALV.
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3¼ ⁷⁄₈ x 5
2 2 2 2 2 2 2 2 2 2
2.90 3.41 4.23 3.79 7.07 6.98 6.50 11.40 12.99 17.77
Note: Not recommended for Vacuum Service
$26.25 $34.75
QUANTITY
$39.00 $51.25 $58.50 $50.00 $92.50 $82.50 $77.50 POA $158.25 $237.25
$39.00 $33.75 $62.50 $55.50 $52.25
POA $105.75 $158.75
BOX
CRATE
24 18 16 16 8 8 8 4 -
864 648 576 576 288 288 288 144 70
q — Sold in box only
STYLE F-3 GROOVED FLANGE ADAPTER NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
3.20 4.60 5.70 7.90 9.20 10.00 15.70 47.00 69.00
COMPLETE WITH OSTEPDM GASKET PAINTED GALV. $41.75 $45.75 $76.25 $96.25
$172.75 $126.50 $163.75 $441.25 $818.50
$58.75 $64.25 $122.25 $159.50 $275.00 $222.25 $276.50 $616.50 $1,142.50
QUANTITY BOX
CRATE
12 10 10 8 6 -
432 360 360 288 216 120 80 40 40
q — Sold in box only
Revised:
www.anvilintl.com
6
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter Fittings for Grooved-End Pipe (Short Body) STYLE SE-1 90° ELBOW NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
50 65 80 100 150 200
1.50 2.14 3.60 5.78 11.78 21.10
PRICE EACH PAINTED GALV. $14.00 $20.00
$27.00 $36.25 $108.75 $209.25
$17.00 $24.00 $32.00 $43.50 $130.50 $250.75
QUANTITY BOX
CRATE
32 18 10 6 2 -
1,152 648 360 216 72 18
q — Sold in box only
STYLE ST-1 STRAIGHT TEE NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
Revised:
50 65 80 100 150 200
2.90 4.60 6.90 10.90 25.00 42.10
PRICE EACH PAINTED GALV. $22.00 $31.00 $43.50 $66.00 $165.50 $370.00
$26.25 $37.25 $52.00 $79.00 $198.50 $443.75
QUANTITY BOX
CRATE
18 12 6 4 -
648 432 216 144 36 14
www.anvilintl.com
7
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE E-1 90° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.85 0.90 1.47 2.90 4.22 8.00 11.94 19.65 32.20 54.11 70.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.75 $13.75 $14.25 $20.25 $29.00 $40.25 $112.75 $111.50 $222.50 $658.00 $1,096.50
$16.25 $16.25 $17.00 $24.50 $34.75 $48.25 $135.00 $133.75 $267.00 $789.75 $1,315.75
60 50 28 15 9 4 2 2 -
2,160 1,800 1,008 540 324 144 72 72 15 8 4
q — Sold in box only
STYLE E-2 45° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.59 0.78 1.02 1.80 2.79 4.90 11.32 11.55 17.90 30.00 40.40
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.00 $13.75 $14.75 $20.25 $27.50 $38.75 $111.50 $108.75 $216.75 $617.00 $822.50
$19.00 $19.00 $21.50 $30.50 $43.25 $58.00 $162.25 $178.00 $335.00 $1,052.50 $1,450.50
90 60 36 24 12 8 2 2 -
3,240 2,160 1,296 864 432 288 72 72 36 12 4
q — Sold in box only
Revised:
www.anvilintl.com
8
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE E-3* 22½° ELBOW
STYLE E-4* 11¹/₄° ELBOW PRICE EACH
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS)
PAINTED
GALV.
$101.75
$130.00
0.70
$101.75
$130.00
1.60
$101.75
$130.00
2.10 3.10 5.40
$101.75 $118.25 $158.00
$130.00 $176.50 $236.00
7.80
$403.50
$604.75
150
8.30
$445.50
$666.50
200
17.90
$933.00
$1,394.75
250 300
30.00 40.40
$1,602.50 $2,165.50
$2,093.00 $2,674.50
1¼
32
1½
40
2
50
2½
65
3 4 5
80 100 125
6 8 10 12
0.80
PRICE EACH NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.50 0.70 0.90 1.50 2.00 3.30 5.00 6.50 10.00 14.50 29.30
PAINTED
GALV.
$101.75 $101.75 $115.75 $115.75 $118.25 $158.00 $403.50 $445.50 $933.00 $1,602.50 $2,166.00
$130.00 $130.00 $181.50 $181.50 $181.50 $236.00 $603.00 $802.25 $1,407.00 $2,116.75 $2,674.50
* Segmentally welded.
* Segmentally welded.
STYLE E-9 90° DRAIN ELBOW
STYLE K-9 DRAIN CAP PRICE EACH
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS)) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.87 2.13 2.76 4.33 5.60 8.80 12.80 18.77 32.64 48.50 66.00
PAINTED
GALV.
$114.50 $114.50 $114.50 $114.50 $124.50 $140.75 $200.50 $220.50 $332.25 $779.50 $1,199.25
$171.00 $171.00 $171.00 $171.00 $186.25 $209.75 $299.50 $329.25 $496.75 $1,165.50 $1,793.25
PRICE EACH NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8
32 40 50 65 80 100 125 150 200
0.71 0.76 0.83 1.06 1.27 2.92 3.40 4.02 6.66
PAINTED $54.50 $54.50 $54.50 $54.50 $64.25 $67.25 $129.50 $109.00 $129.50
GALV. $77.00 $77.00 $77.00 $77.00 $90.50 $95.00 $182.25 $154.00 $182.25
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
Revised:
www.anvilintl.com
9
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE SE-5 REDUCING 90° ELBOW GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼
1½ 2 2½ 3
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x¾ x1
WEIGHT EACH (LBS) 0.50 0.54 0.60 0.63 0.70 0.80 0.84 0.93 1.04 1.18 1.30 1.50 2.20 2.50
PRICE EACH
QUANTITY
PAINTED $77.75 $77.75 $77.75 $77.75 $77.75 $77.75 $81.50 $85.25 $85.25 $83.00 $93.25 $93.25 $111.75 $111.75
BOX
CRATE
80 80 80 80 80 80 50 50 50 36 36 36 24 24
2,880 2,880 2,880 2,880 2,880 2,880 1,800 1,800 1,800 1,296 1,296 1,296 864 864
q — Sold in box only
STYLE SK-1 CAP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 * 12 *
32 40 50 65 80 100 125 150 200 250 300
0.31 0.39 0.54 0.75 1.23 1.96 4.60 4.58 6.00 21.00 35.50
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$5.75 $7.00 $8.25 $9.75 $12.25 $18.00 $51.00 $47.75 $78.50 $167.75 $272.00
$7.00 $8.75 $9.75 $12.00 $14.25 $21.75 $61.00 $57.25 $94.25 $248.75 $400.75
180 150 100 70 45 25 12 6 -
6,480 5,400 3,600 2,520 1,620 900 432 216 70 50
* - Sizes 10" and 12" are STYLE K-1 Design
Revised:
www.anvilintl.com
10
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe ◊ STYLE F-2* FLANGE NIPPLE ANSI 150
STYLE X-1* STEEL CROSS PRICE EACH
NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
6.20 9.90 11.00 47.00 40.00 50.00 60.00 60.00 91.00
PAINTED
GALV.
$343.25 $604.00 $634.25 $751.75 $906.00 $948.50 $1,186.25 $1,858.25 $2,543.00
$514.25 $607.50 $655.75 $1,124.50 $1,117.75 $1,331.25 $1,772.25 $2,779.50 $3,803.00
PRICE EACH NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded. ◊ Flange portion is 150# steel. Larger sizes available upon request.
32 40 50 65 80 100 125 150 200 250 300
2.00 2.20 2.80 3.30 4.50 6.60 9.30 14.50 28.50 40.50 57.00
PAINTED
GALV.
$368.50 $368.50 $368.50 $368.50 $466.75 $786.50 $1,606.50 $2,054.75 $2,696.00 $4,639.75 $6,695.00
$492.25 $492.25 $457.75 $457.75 $577.50 $964.50 $1,929.00 $2,494.50 $3,350.25 $5,712.00 $8,303.25
* Segmentally welded steel.
STYLE T-1 STRAIGHT TEE (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.40 1.46 2.18 3.30 6.41 9.92 17.93 22.00 42.10 72.73 91.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$16.75 $16.75
$26.25 $26.25 $36.75 $50.00 $78.50 $111.50 $289.50 $310.25 $591.00 $1,371.25 $2,410.50
40 35 18 9 5 2 1 -
1,440 1,260 648 324 180 72 36 36 12 8 4
$24.50 $32.75 $44.75
$70.25 $199.00 $186.25 $402.00 $925.25 $1,575.75
q — Sold in box only
Revised:
www.anvilintl.com
11
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE T-2 REDUCING TEE NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
10 x 10
Revised:
x 1* x 1¼ x1½ x1 x 1¼ x1½ x 2* x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½* x 3* x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x 5* x 1½ x2 x 2½ x3 x 4* x5 x 6* x 1½ x2 x 2½ x3 x4 x5 x6 x8
CONTINUED PRICE EACH
NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x200
2.60 3.00 3.00 4.40 4.40 4.40 4.40 6.05 6.05 6.05 6.05 6.05 10.98 10.98 10.98 10.98 12.28 11.99 13.95 13.95 13.95 13.95 13.95 13.95 13.95 25.25 25.25 25.25 23.54 22.79 24.95 24.20 25.39 42.16 42.16 42.16 42.16 41.54 24.80 39.51 69.25 69.25 69.25 69.25 69.25 69.25 35.60 69.25
$278.50 $278.50 $278.50 $278.50 $278.50 $278.50 $278.50 $300.75 $300.75 $300.75 $300.75 $300.75 $332.25 $332.25 $332.25 $332.25 $332.25 $332.25 $713.25 $713.25 $713.25 $713.25 $713.25 $713.25 $713.25 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $1,134.00 $1,134.00 $1,134.00 $1,134.00 $1,639.25 $1,639.25 $1,639.25 $1,975.75 $1,975.75 $1,975.75 $1,975.75 $2,064.50 $2,111.25 $2,111.25 $2,149.25
GALV. $329.00 $329.00 $329.00 $329.00 $329.00 $330.75 $330.75 $367.25 $367.25 $367.25 $367.25 $367.25 $413.75 $413.75 $413.75 $413.75 $413.75 $413.75 $898.00 $898.00 $898.00 $898.00 $898.00 $898.00 $898.00 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,372.75 $1,424.25 $1,413.00 $1,453.00 $2,108.75 $2,123.25 $2,131.50 $2,439.00 $2,463.75 $2,478.75 $2,513.50 $2,627.50 $2,682.50 $2,716.75 $2,821.25
NOMINAL SIZE (INCHES)
12 x 12
x1 x2 x 2½ x3 x4 x5 x6 x8 x 10*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 300 x 300 x 25 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
100.00 100.00 100.00 100.00 101.60 100.00 100.00 100.00 101.60
$2,659.75 $2,659.75 $2,659.75 $2,659.75 $2,850.25 $3,013.00 $3,048.75 $3,134.75 $3,280.50
$3,214.00 $3,255.00 $3,318.25 $3,388.00 $3,643.75 $3,896.00 $3,933.00 $4,023.25 $4,211.25
* Ductile iron, all others segmentally welded.
www.anvilintl.com
12
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE T-3 REDUCING TEE W/ THREADED BRANCH NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
Revised:
x ¾* x 1* x1¼ x1½ x1 x 1¼ x1½ x2 x 1* x 1¼ x 1½* x2 x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x 2½ x3 x4 x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 50 x 50 x 20 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.68 3.00 3.00 3.00 4.40 4.40 4.40 4.40 6.47 6.05 6.27 6.05 6.05 10.47 10.98 10.98 10.98 10.98 10.98 13.95 13.95 13.95 13.95 32.95 13.95 13.95 25.25 25.25 25.25 25.25 26.50 25.25 25.25 25.25 42.16 42.16 42.16 42.16 42.16 42.16 42.16
$295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $340.75 $340.75 $340.75 $340.75 $340.75 $368.25 $368.25 $368.25 $368.25 $368.25 $368.25 $658.00 $658.00 $658.00 $658.00 $658.00 $658.00 $658.00 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $1,134.00 $1,134.00 $1,134.00 $1,134.00 $1,639.25 $1,639.25 $1,639.25
$344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $399.50 $399.50 $399.50 $399.50 $399.50 $474.25 $474.25 $474.25 $474.25 $474.25 $474.25 $825.75 $825.75 $825.75 $825.75 $825.75 $825.75 $825.75 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,379.00 $1,453.00 $1,440.50 $1,453.00 $2,108.75 $2,123.25 $2,131.50
NOMINAL SIZE (INCHES)
10 x 10
12 x 12
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x 200 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 69.25 69.25 69.25 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
$1,975.25 $1,975.25 $1,975.25 $1,975.25 $2,111.25 $2,111.25 $2,111.25 $2,111.25 $2,659.75 $2,659.75 $2,659.75 $2,850.00 $2,850.00 $3,048.75 $3,134.75 $3,280.50
$2,439.00 $2,439.00 $2,439.00 $2,439.00 $2,716.75 $2,716.75 $2,716.75 $2,716.75 $3,419.00 $3,419.00 $3,419.00 $3,643.75 $3,896.25 $3,933.00 $4,023.25 $4,029.25
* Ductile iron, all others segmentally welded.
www.anvilintl.com
13
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE R-1 CONCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
Revised:
x1 x1 x 1¼ x 1* x 1¼* x 1½* x1 x 1¼ x 1½ x 2* x1 x 1¼ x 1½ x 2* x 2½* x1 x 1¼ x 1½* x 2* x 2½ x 3* x 3½ x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x5 x 1½ x2 x 2½ x 3* x 4* x5 x 6*
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 25 125 x 32 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
0.85 0.73 0.95 0.80 0.79 0.79 1.50 1.50 1.50 1.91 2.35 2.35 2.35 1.41 1.50 3.21 3.21 2.66 2.51 3.21 2.55 1.00 4.84 4.84 4.84 4.84 4.84 4.84 4.84 7.50 7.50 7.50 6.34 5.10 4.29 7.50 7.50 9.07 9.07 9.07 9.15 9.07 9.07 9.07
$103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $113.50 $113.50 $113.50 $113.50 $113.50 $120.25 $120.25 $120.25 $120.25 $150.00 $150.00 $150.00 $209.50 $209.50 $209.50 $209.50 $209.50 $209.50 $209.50 $278.00 $278.00 $278.00 $278.00 $278.00 $278.00 $278.00 $358.00 $496.50 $496.50 $496.50 $496.50 $496.50 $496.50 $632.50
$120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $137.00 $137.00 $137.00 $137.00 $137.00 $148.75 $148.75 $148.75 $148.75 $183.00 $183.00 $183.00 $261.50 $261.50 $261.50 $261.50 $261.50 $261.50 $261.50 $345.25 $345.25 $345.25 $345.25 $345.25 $345.25 $445.00 $445.00 $624.00 $624.00 $624.00 $624.00 $624.00 $624.00 $788.00
NOMINAL SIZE (INCHES)
10
12
x 1½ x2 x 2½ x3 x4 x5 x6 x 8* x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
16.38 16.38 16.38 16.38 16.38 16.38 16.38 23.10 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $1,179.75 $2,599.50 $1,290.00 $1,290.00 POA POA POA POA $2,311.25 $2,311.25 $2,311.25 $2,311.25 $2,311.25
POA POA POA POA $1,447.25 $2,953.00 $1,602.75 $1,629.25 POA POA POA POA $2,717.25 $2,717.25 $2,717.25 $2,717.25 $2,717.25
* Ductile iron Segmentally welded through 4 x 3 unless *Ductile Iron. Forged Steel 5 x 1 and larger unless *Ductile Iron.
www.anvilintl.com
14
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE R-2 ECCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
x1 x1 x 1¼ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½ x 3* x1 x 1½ x2 x 2½ x3 x4 x1 x 1½ x2 x 2½ x3 x 4* x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 25 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
1.25 1.30 1.30 1.40 1.00 1.00 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.00 3.21 3.21 3.21 3.21 3.21 4.84 4.84 4.84 4.84 4.84 4.84 6.00 7.50 7.50 7.50 7.50 7.50 7.50 9.07 9.07 9.07 9.07 9.07 9.07 9.07
$423.75 $423.75 $414.75 $468.00 $513.25 $429.50 $1,326.00 $644.25 $429.50 $430.00 $1,420.25 $1,269.00 $590.50 $556.25 $556.25 $2,851.75 $2,851.75 $1,456.75 $1,411.25 $556.25 $556.25 POA POA $2,693.75 $1,368.75 $1,322.50 $1,041.00 $2,497.00 POA $2,277.25 $2,529.75 $1,303.50 $1,070.25 $855.50 POA POA POA $2,645.50 $2,312.00 $2,152.50 $929.50
$495.00 $495.00 $477.50 $524.00 $563.25 $494.50 $1,803.75 $727.50 $580.75 $627.50 $2,081.25 $1,179.75 $686.25 $814.75 $814.75 $3,878.25 $3,878.25 $1,566.25 $1,920.50 $754.50 $757.00 POA POA $3,664.00 $1,468.75 $1,468.25 $1,416.25 $2,698.25 POA $2,468.00 $2,938.75 $1,898.00 $1,455.25 $1,164.50 POA POA POA $2,787.75 $2,625.00 $2,461.75 $1,260.25
NOMINAL SIZE (INCHES)
10
12
16.38 16.38 16.38 16.38 16.38 16.38 16.38 16.38 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $4,242.00 $3,996.00 $3,013.50 $2,551.00 POA POA POA POA $4,645.50 $3,840.25 $4,025.75 $3,923.00 $3,513.75
POA POA POA POA $5,064.50 $4,681.50 $3,556.00 $3,158.00 POA POA POA POA $6,483.00 $5,381.00 $4,826.25 $4,673.75 $4,147.50
STYLE R-3 CONCENTRIC REDUCER GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
5
6
250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
* Ductile iron, all others segmentally welded.
4
Revised:
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV.
www.anvilintl.com
x1 x1 x 1¼ x 1* x 1¼* x 1½ * x1 x 1¼ x 1½ x2 x 1* x 1¼ x 1½ x 2* x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x3 x 4*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 80 150 x 125
0.95 0.95 0.95 1.00 1.00 0.79 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.21 3.21 3.21 3.21 3.21 3.21 4.84 6.00 6.00 6.00 7.50 7.50 7.50
$101.50 $101.50 $101.50 $101.50 $101.50 $101.50 $152.25 $152.25 $152.25 $101.50 $111.75 $111.75 $126.00 $126.00 $152.25 $144.50 $144.50 $144.50 $152.75 $154.75 $188.00 $1,086.50 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25
$125.75 $125.75 $125.75 $125.75 $125.75 $125.75 $179.75 $179.75 $179.75 $179.75 $150.25 $150.25 $150.25 $150.25 $179.75 $189.50 $189.50 $189.50 $189.50 $189.50 $223.75 $1,176.75 $361.25 $361.25 $361.25 $361.25 $361.25 $361.25 15
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Mechanical Branch Tees STYLE MT-1 THREADED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 2½
3
4
5 6
x1 x 1¼ x 1½ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½ x 1½ x2 x 2½ x 1½ x2 x 2½
50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 80 x 25 80 x 32 80 x 40 80 x 50 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 125 x 40 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65
WEIGHT EACH (LBS) 1.70 1.70 1.70 3.60 3.60 3.60 3.80 3.30 3.80 4.40 4.60 4.60 4.60 4.80 5.40 7.40 7.90 7.90 7.50 8.00 8.00
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4
PAINTED $27.50 $27.50 $27.50 $30.00 $32.75 $31.25 $35.25 $36.25 $36.25 $40.50 $40.75 $40.75 $42.75 $44.50 $44.50 $52.00 $52.00 $55.00 $53.00 $53.00 $57.75
GALV. $40.75 $40.75 $40.75 $50.00 $50.00 $50.00 $52.00 $52.00 $52.00 $59.75 $60.25 $60.25 $60.25 $66.50 $66.50 $77.25 $77.25 $81.75 $79.00 $79.00 $85.50
BOX 22 22 22 16 16 16 10 10 10 10 7 7 7 6 6 4 4 4 4 4 3
QUANTITY CRATE 792 792 792 576 576 576 360 360 360 360 252 252 252 216 216 144 144 144 144 144 108
*** All MT-1 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
STYLE MT-2 GROOVED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 3 4 5
6
x 1½ x2 x 1½ x2 x 2½ x3 x2 x 2½ x 1½ x2 x 2½ x3 x4
80 x 40 80 x 50 100 x 40 100 x 50 100 x 65 100 x 80 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65 150 x 80 150 x100
WEIGHT EACH (LBS) 3.80 4.40 4.60 4.80 5.40 7.60 7.90 7.90 8.00 8.00 8.00 9.70 13.60
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2
½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 3¼ ½ x 3¼ 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4
PAINTED
GALV.
$35.25 $40.50 $42.50 $44.50 $44.00 $47.75 $57.75 $57.75 $56.75 $57.75 $57.75 $61.00 $67.25
$52.25 $59.75 $63.00 $66.50 $66.00 $70.75 $85.50 $85.50 $84.75 $85.50 $85.50 $85.50 $100.75
BOX 10 10 7 7 6 6 4 4 4 4 4 3 3
QUANTITY CRATE 360 360 252 252 216 216 144 144 144 144 144 108 108
*** All MT-2 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
Revised:
www.anvilintl.com
16
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Mechanical Branch Tees STYLE MT-30 THREADED MECHANICAL BRANCH TEE NOMINAL SIZE NOMINAL SIZE (INCHES) (MM) 1¼ 1½ 2 2½
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1
32x15 32x20 32x25 40x15 40x20 40x25 50x15 50x20 50x25 65x15 65x20 65x25
WEIGHT EACH (LBS) 0.83 0.87 0.97 0.64 0.93 0.96 0.84 0.95 0.96 0.89 0.95 1.03
COMPLETE PLATED
$13.00 $13.00 $13.50 $13.50 $13.50 $13.50 $14.50 $14.50 $14.50 $16.25 $16.25 $16.25
QUANTITY BOX
CRATE
50 50 50 50 50 50 45 45 45 40 40 40
1,800 1,800 1,800 1,800 1,800 1,800 1,620 1,620 1,620 1,440 1,440 1,440
Note: BSP equivalent is available as MT-90.
q — Sold in box only
Revised:
www.anvilintl.com
17
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Spare Parts / Lubricants Plated Trackhead Bolts and Nuts for Couplings BOLT AND NUT SIZE (INCHES) PRICE EACH ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2½
$14.25 $14.25 $21.25 $15.75 $15.00 POA $23.00 $18.50 $19.50 $20.50 POA $26.25 $41.50 $41.50 $41.50 $49.00
½ x 2¾ ½x3 ½ x 3¼ ½ x 3½ ⁵ ⁄₈ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3½ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4¼ ¾ x 4¼ ¾ x 4½ ⁷⁄₈ x 5 ⁷⁄₈ x 5½
C-1, C-3, C-4 & F-3 Gaskets C-1, C-3, C-4 NOMINAL SIZE FLUSH GAP (INCHES) GASKET 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
LUBRICANTS STANDARD LUBRICANT 2LB Tub Std Gruvlok Lubricant 5 Gallon Pail
$190.50 / tub
QUICK DRY LUBRICANT 1 Quart Can
$204.50
1 Gallon Pail
$346.00
XTREME LUBRICANT (SILICONE) 2.2 lb. Tub (Gruvlok Lubricant)
Revised:
$14.75 $16.00 $18.50 $21.50 $29.75 POA $51.50 $81.25 -
$13.25 $14.50 $17.50 $24.00 POA $41.50 $65.25 $191.75 $250.75
$95.50 $332.25
E TYPE A GASKET $9.00 $9.25 $9.75 $11.00 $13.50 $18.25 POA $31.25 $49.00 $144.25 $188.00
NOMINAL SIZE (INCHES) 2 x 1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
RC-2 “E” GASKET $18.75 $24.00 $27.75 $23.75 $43.50 $39.00 $36.50 POA $74.25 $111.25
STANDARD LUBRICANT USAGE GUIDE
XTREME LUBRICANT USAGE GUIDE
NUMBER OF GASKETS
NUMBER OF GASKETS PER QUART 1,200 900 600 390 300 255 180 150 120 105 90 60
PRICE $1,603.00
10 oz. Tube (1 each)
F-3 “E” GASKET
RC-2 Gaskets
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
PER TUBE 55 45 25 20 15 10 9 7 6 5 4
www.anvilintl.com
3
PER QUART 400 300 200 130 100 85 60 50 40 35 30 20
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
18
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
CUSTOMER SERVICE CENTERS UNITED STATES
EUROPE AND MIDDLE EAST
Tinley Park, IL Tel: 708-885-3000 • Fax: 708-534-5441 Toll Free: 1-800-301-2701
Tel: +31-53-5725570 • Fax: +31-53-5725579 International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
Irving, TX Tel: 972-871-1206 • Fax: 972-641-8946 Toll Free: 1-800-451-4414
MEXICO, PUERTO RICO AND LATIN AMERICA International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
CANADA Simcoe, Ontario Tel: 519-426-4551 • Fax: 519-426-5509
U.S. REGIONAL DISTRIBUTION CENTERS TINLEY PARK
7979 West 183rd Street, Unit D Tinley Park, IL 60477
IRVING
1401 Valley View Lane, Suite 150 Irving, TX 75061
COLUMBIA
800 Malleable Road Columbia, PA 17512
ONTARIO
1470 S. Vintage Avenue Ontario, CA 91761
ANVIL EPS Engineered Pipe Supports Customer Service Center 160 Frenchtown Road North Kingstown, RI 02852 Tel: 401-886-3000 Fax: 401-886-3010 Toll Free: 1-877-406-3108
additional INVENTORY LOCATIONS* UNITED STATES: Arizona, Colorado, Georgia, Indiana, Massachusetts, Minnesota, Missouri, New York, Tennessee, Texas, Washington and Wisconsin
INTERNATIONAL: Ontario, Canada
#778 / Printed in USA / ©2014 Revision: April 16, 2014
*Inventory varies at locations B U I L D I N G
C O N N E C T I O N S
T H A T
L A S T North Alabama Pipe
www.anvilintl.com
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: • All orders are accepted on the basis of prices in effect at the time of shipment. • Prices apply only to Standard Sizes as listed in catalogs. •O n orders received for cartoned items in less than “carton (not container) quantities, “we reserve the right to adjust to the next carton quantity above the number of pieces shown on the order. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NORTHERN REGION CUSTOMER SERVICE CENTER
80 0 -301-2701
SOUTHERN REGION CUSTOMER SERVICE CENTER
www.anvilintl.com
80 0 - 451- 4 414
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
4. SELLER’S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
2
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Approvals For current certifications, listings and other approvals, visit Anvil’s website at www.anvilintl.com
Standard Gaskets - Your order must specify gasket grade TEMPERATURE RANGE
COMPOUND (COLOR STRIPE)
E
(type A)
Ambient -40°F to +150°F (-40°C to +66°C)
EPDM (Purple)
Applicable for wet and dry (oil free air) sprinkler services.
E
-40°F to +230°F (-40°C to +110°C)
EPDM (Green)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
EP
-40°F to +250°F
EPDM (Green and Red)
Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.
GRADE
GENERAL SERVICE APPLICATION
Standard Gasket
Flush Gasket
Bolts / Nuts U-Bolts
Carbon steel SAE grade 2. Zinc electroplated to ASTM A-164.
Oval Neck Track Head Bolts
Heat-treated to conform to ASTM A-183 minimum tensile strength 110,000 PSI with yield point of 80,000 PSI. Zinc electroplated to ASTM A-164.
Heavy Hex Nuts
SAE J995 Grade 2 or ASTM A536 Grade “A” or “B”. Zinc Electroplated to ASTM A-164.
Hex Flange Lock Nuts
Carbon steel per ASTM A-194. Zinc electroplates to ASTM A-164.
Housings & Fittings ASTM A-536
All ductile iron housings and fittings meet or exceed material conforming to ASTM A-536.
ASTM A-53 or A-135
All segmentally welded fittings std weight except E-9 and K-9 is SCH 10.
ASTM 234 WPB/ASA B16.9 ASTM A53 or A135
Forged Steel Fittings.
ASTM A-312/A-312M
Stainless steel fittings grade TP304L or TP316L.
ANSI/ASME
All MT-1 mechanical tees are NPT standard conforming to ANSI-ASME B1.20.1.
BS 21
All MT-8 mechanical tees are British parallel joining threads.
Finish
All grooved coupling housings and fittings are finished with a rust inhibiting orange paint. Hot dipped galvanizing per ASTM A-153 is also available upon request.
ASME/ANSI B16.1
F-3 grooved flange adapter drilling conforms to ASME/ANSI B16.1 for class 125 cast iron flanges.
Revised:
www.anvilintl.com
3
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Table of Contents Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Approvals, Gasket Material, Bolts / Nuts, Housing & Fittings . . . . . . . . . . . . . . . . . . . . . . . . 3 Couplings / Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
C-1 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-3 LW Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 C-4 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RC-2 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 F-3 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fittings for Fire Protection (Short Body Fittings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SE-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ST-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fittings for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–15
E-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-2 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E-3 22½° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-4 11¼° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 E-9 90° Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 K-9 Drain Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SE-5 90° Reducing Elbow (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SK-1 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 F-2 Flange Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 X-1 Steel Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 T-2 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 T-3 Reducing Tee (Threaded Branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 R-1 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 R-2 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 R-3 Concentric Reducer (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–17
MT-1 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-2 Grooved Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MT-30 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spare Parts / Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Revised:
www.anvilintl.com
4
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter STYLE C-1 / C-3 (AMBIENT) LW FLEXIBLE COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 6 8 10 (C-1) 12 (C-1)
32 40 50 65 80 100 150 200 250 300
1.25 1.46 1.45 1.98 2.58 4.14 7.00 13.00 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 4¼ ⁷⁄₈ x 5½ ⁷⁄₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV. $11.00 $11.25 $12.75 $14.00
$16.75 $21.75 $37.50 $63.75 $236.25 $288.00
$13.50 $13.75 $15.00 $17.00 $20.00 $26.00 $44.75 $76.75 $296.50 $361.25
$13.00 $13.25 $14.25 $16.00 $19.50 $25.00 $43.00 $73.50 POA POA
$15.25 $15.75 $17.50 $19.75 $23.00 $30.00 $52.00 $88.25 POA POA
QUANTITY FOR “A” GASKET ONLY BOX CRATE 45 45 42 28 20 10 6 -
1,620 1,620 1,512 1,008 720 360 216 70 27 22
q — Sold in box only Standard Gasket
Flush Gasket
STYLE C-4 (AMBIENT) RIGID COUPLINGS NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
Revised:
32 40 50 65 80 100 125 150 200 250 300
1.48 1.66 1.83 2.04 2.41 3.17 5.15 5.84 10.82 21.50 27.36
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2¼ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ³ ⁄₈ x 2½ ½x3 ½x3 ⁵ ⁄₈ x 3½ ⁷⁄₈ x 5 ⁷⁄₈ x 5½
COUPLINGS COMPLETE “A” GASKET FLUSH “E” GASKET PAINTED GALV. PAINTED GALV. $11.00 $11.25 $12.75 $14.00
$16.75 $21.75 $36.25 $37.50 $63.75 $190.75 $234.00
www.anvilintl.com
$13.50 $13.75 $15.00 $17.00 $20.00 $26.00 $43.50 $44.75 $76.75 $228.50 $281.00
$13.00 $13.25 $14.25 $16.00
$19.50 $25.00 $43.00 $73.50 -
$15.25 $15.75 $17.50 $19.75 $23.00 $30.00 $52.00 $88.25 -
QUANTITY FOR “A” GASKET ONLY BOX CRATE 40 40 30 28 20 10 7 6 -
1,440 1,440 1,080 1,008 720 360 252 216 80 27 22
5
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter STYLE RC-2 REDUCING COUPLING NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 x1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
50 x 40 65 x 50 80 x 50 80 x 65 100 x 50 100 x 65 100 x 80 125 x 100 150 x 100 200 x150
COUPLINGS COMPLETE WITH “E” GASKET PAINTED GALV.
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3¼ ⁷⁄₈ x 5
2 2 2 2 2 2 2 2 2 2
2.90 3.41 4.23 3.79 7.07 6.98 6.50 11.40 12.99 17.77
Note: Not recommended for Vacuum Service
$26.25 $34.75
QUANTITY
$39.00 $51.25 $58.50 $50.00 $92.50 $82.50 $77.50 POA $158.25 $237.25
$39.00 $33.75 $62.50 $55.50 $52.25
POA $105.75 $158.75
BOX
CRATE
24 18 16 16 8 8 8 4 -
864 648 576 576 288 288 288 144 70
q — Sold in box only
STYLE F-3 GROOVED FLANGE ADAPTER NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
3.20 4.60 5.70 7.90 9.20 10.00 15.70 47.00 69.00
COMPLETE WITH OSTEPDM GASKET PAINTED GALV. $41.75 $45.75 $76.25 $96.25
$172.75 $126.50 $163.75 $441.25 $818.50
$58.75 $64.25 $122.25 $159.50 $275.00 $222.25 $276.50 $616.50 $1,142.50
QUANTITY BOX
CRATE
12 10 10 8 6 -
432 360 360 288 216 120 80 40 40
q — Sold in box only
Revised:
www.anvilintl.com
6
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Couplings / Flange Adapter Fittings for Grooved-End Pipe (Short Body) STYLE SE-1 90° ELBOW NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
50 65 80 100 150 200
1.50 2.14 3.60 5.78 11.78 21.10
PRICE EACH PAINTED GALV. $14.00 $20.00
$27.00 $36.25 $108.75 $209.25
$17.00 $24.00 $32.00 $43.50 $130.50 $250.75
QUANTITY BOX
CRATE
32 18 10 6 2 -
1,152 648 360 216 72 18
q — Sold in box only
STYLE ST-1 STRAIGHT TEE NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 2 2½ 3 4 6 8
Revised:
50 65 80 100 150 200
2.90 4.60 6.90 10.90 25.00 42.10
PRICE EACH PAINTED GALV. $22.00 $31.00 $43.50 $66.00 $165.50 $370.00
$26.25 $37.25 $52.00 $79.00 $198.50 $443.75
QUANTITY BOX
CRATE
18 12 6 4 -
648 432 216 144 36 14
www.anvilintl.com
7
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE E-1 90° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.85 0.90 1.47 2.90 4.22 8.00 11.94 19.65 32.20 54.11 70.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.75 $13.75 $14.25 $20.25 $29.00 $40.25 $112.75 $111.50 $222.50 $658.00 $1,096.50
$16.25 $16.25 $17.00 $24.50 $34.75 $48.25 $135.00 $133.75 $267.00 $789.75 $1,315.75
60 50 28 15 9 4 2 2 -
2,160 1,800 1,008 540 324 144 72 72 15 8 4
q — Sold in box only
STYLE E-2 45° ELBOW (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.59 0.78 1.02 1.80 2.79 4.90 11.32 11.55 17.90 30.00 40.40
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$13.00 $13.75 $14.75 $20.25 $27.50 $38.75 $111.50 $108.75 $216.75 $617.00 $822.50
$19.00 $19.00 $21.50 $30.50 $43.25 $58.00 $162.25 $178.00 $335.00 $1,052.50 $1,450.50
90 60 36 24 12 8 2 2 -
3,240 2,160 1,296 864 432 288 72 72 36 12 4
q — Sold in box only
Revised:
www.anvilintl.com
8
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE E-3* 22½° ELBOW
STYLE E-4* 11¹/₄° ELBOW PRICE EACH
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS)
PAINTED
GALV.
$101.75
$130.00
0.70
$101.75
$130.00
1.60
$101.75
$130.00
2.10 3.10 5.40
$101.75 $118.25 $158.00
$130.00 $176.50 $236.00
7.80
$403.50
$604.75
150
8.30
$445.50
$666.50
200
17.90
$933.00
$1,394.75
250 300
30.00 40.40
$1,602.50 $2,165.50
$2,093.00 $2,674.50
1¼
32
1½
40
2
50
2½
65
3 4 5
80 100 125
6 8 10 12
0.80
PRICE EACH NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
0.50 0.70 0.90 1.50 2.00 3.30 5.00 6.50 10.00 14.50 29.30
PAINTED
GALV.
$101.75 $101.75 $115.75 $115.75 $118.25 $158.00 $403.50 $445.50 $933.00 $1,602.50 $2,166.00
$130.00 $130.00 $181.50 $181.50 $181.50 $236.00 $603.00 $802.25 $1,407.00 $2,116.75 $2,674.50
* Segmentally welded.
* Segmentally welded.
STYLE E-9 90° DRAIN ELBOW
STYLE K-9 DRAIN CAP PRICE EACH
NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS)) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.87 2.13 2.76 4.33 5.60 8.80 12.80 18.77 32.64 48.50 66.00
PAINTED
GALV.
$114.50 $114.50 $114.50 $114.50 $124.50 $140.75 $200.50 $220.50 $332.25 $779.50 $1,199.25
$171.00 $171.00 $171.00 $171.00 $186.25 $209.75 $299.50 $329.25 $496.75 $1,165.50 $1,793.25
PRICE EACH NOMINAL PIPE NOMINAL SIZE WEIGHT EACH SIZE (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8
32 40 50 65 80 100 125 150 200
0.71 0.76 0.83 1.06 1.27 2.92 3.40 4.02 6.66
PAINTED $54.50 $54.50 $54.50 $54.50 $64.25 $67.25 $129.50 $109.00 $129.50
GALV. $77.00 $77.00 $77.00 $77.00 $90.50 $95.00 $182.25 $154.00 $182.25
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
List pricing above is for 1" pol (standard). E-9 is also available in 3/4" and 1/2" at same list price as 1" pol.
Revised:
www.anvilintl.com
9
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE SE-5 REDUCING 90° ELBOW GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼
1½ 2 2½ 3
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x¾ x1
WEIGHT EACH (LBS) 0.50 0.54 0.60 0.63 0.70 0.80 0.84 0.93 1.04 1.18 1.30 1.50 2.20 2.50
PRICE EACH
QUANTITY
PAINTED $77.75 $77.75 $77.75 $77.75 $77.75 $77.75 $81.50 $85.25 $85.25 $83.00 $93.25 $93.25 $111.75 $111.75
BOX
CRATE
80 80 80 80 80 80 50 50 50 36 36 36 24 24
2,880 2,880 2,880 2,880 2,880 2,880 1,800 1,800 1,800 1,296 1,296 1,296 864 864
q — Sold in box only
STYLE SK-1 CAP NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 * 12 *
32 40 50 65 80 100 125 150 200 250 300
0.31 0.39 0.54 0.75 1.23 1.96 4.60 4.58 6.00 21.00 35.50
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$5.75 $7.00 $8.25 $9.75 $12.25 $18.00 $51.00 $47.75 $78.50 $167.75 $272.00
$7.00 $8.75 $9.75 $12.00 $14.25 $21.75 $61.00 $57.25 $94.25 $248.75 $400.75
180 150 100 70 45 25 12 6 -
6,480 5,400 3,600 2,520 1,620 900 432 216 70 50
* - Sizes 10" and 12" are STYLE K-1 Design
Revised:
www.anvilintl.com
10
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe ◊ STYLE F-2* FLANGE NIPPLE ANSI 150
STYLE X-1* STEEL CROSS PRICE EACH
NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 2 2½ 3 4 5 6 8 10 12
50 65 80 100 125 150 200 250 300
6.20 9.90 11.00 47.00 40.00 50.00 60.00 60.00 91.00
PAINTED
GALV.
$343.25 $604.00 $634.25 $751.75 $906.00 $948.50 $1,186.25 $1,858.25 $2,543.00
$514.25 $607.50 $655.75 $1,124.50 $1,117.75 $1,331.25 $1,772.25 $2,779.50 $3,803.00
PRICE EACH NOMINAL SIZE NOMINAL SIZE WEIGHT EACH (INCHES) (MM) (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
* Segmentally welded. ◊ Flange portion is 150# steel. Larger sizes available upon request.
32 40 50 65 80 100 125 150 200 250 300
2.00 2.20 2.80 3.30 4.50 6.60 9.30 14.50 28.50 40.50 57.00
PAINTED
GALV.
$368.50 $368.50 $368.50 $368.50 $466.75 $786.50 $1,606.50 $2,054.75 $2,696.00 $4,639.75 $6,695.00
$492.25 $492.25 $457.75 $457.75 $577.50 $964.50 $1,929.00 $2,494.50 $3,350.25 $5,712.00 $8,303.25
* Segmentally welded steel.
STYLE T-1 STRAIGHT TEE (DUCTILE IRON) NOMINAL SIZE NOMINAL WEIGHT (INCHES) SIZE (MM) EACH (LBS) 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
32 40 50 65 80 100 125 150 200 250 300
1.40 1.46 2.18 3.30 6.41 9.92 17.93 22.00 42.10 72.73 91.00
PRICE EACH
QUANTITY
PAINTED
GALV.
BOX
CRATE
$16.75 $16.75
$26.25 $26.25 $36.75 $50.00 $78.50 $111.50 $289.50 $310.25 $591.00 $1,371.25 $2,410.50
40 35 18 9 5 2 1 -
1,440 1,260 648 324 180 72 36 36 12 8 4
$24.50 $32.75 $44.75
$70.25 $199.00 $186.25 $402.00 $925.25 $1,575.75
q — Sold in box only
Revised:
www.anvilintl.com
11
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE T-2 REDUCING TEE NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
10 x 10
Revised:
x 1* x 1¼ x1½ x1 x 1¼ x1½ x 2* x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½* x 3* x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x 5* x 1½ x2 x 2½ x3 x 4* x5 x 6* x 1½ x2 x 2½ x3 x4 x5 x6 x8
CONTINUED PRICE EACH
NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x200
2.60 3.00 3.00 4.40 4.40 4.40 4.40 6.05 6.05 6.05 6.05 6.05 10.98 10.98 10.98 10.98 12.28 11.99 13.95 13.95 13.95 13.95 13.95 13.95 13.95 25.25 25.25 25.25 23.54 22.79 24.95 24.20 25.39 42.16 42.16 42.16 42.16 41.54 24.80 39.51 69.25 69.25 69.25 69.25 69.25 69.25 35.60 69.25
$278.50 $278.50 $278.50 $278.50 $278.50 $278.50 $278.50 $300.75 $300.75 $300.75 $300.75 $300.75 $332.25 $332.25 $332.25 $332.25 $332.25 $332.25 $713.25 $713.25 $713.25 $713.25 $713.25 $713.25 $713.25 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $785.00 $1,134.00 $1,134.00 $1,134.00 $1,134.00 $1,639.25 $1,639.25 $1,639.25 $1,975.75 $1,975.75 $1,975.75 $1,975.75 $2,064.50 $2,111.25 $2,111.25 $2,149.25
GALV. $329.00 $329.00 $329.00 $329.00 $329.00 $330.75 $330.75 $367.25 $367.25 $367.25 $367.25 $367.25 $413.75 $413.75 $413.75 $413.75 $413.75 $413.75 $898.00 $898.00 $898.00 $898.00 $898.00 $898.00 $898.00 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,027.50 $1,372.75 $1,424.25 $1,413.00 $1,453.00 $2,108.75 $2,123.25 $2,131.50 $2,439.00 $2,463.75 $2,478.75 $2,513.50 $2,627.50 $2,682.50 $2,716.75 $2,821.25
NOMINAL SIZE (INCHES)
12 x 12
x1 x2 x 2½ x3 x4 x5 x6 x8 x 10*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 300 x 300 x 25 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
100.00 100.00 100.00 100.00 101.60 100.00 100.00 100.00 101.60
$2,659.75 $2,659.75 $2,659.75 $2,659.75 $2,850.25 $3,013.00 $3,048.75 $3,134.75 $3,280.50
$3,214.00 $3,255.00 $3,318.25 $3,388.00 $3,643.75 $3,896.00 $3,933.00 $4,023.25 $4,211.25
* Ductile iron, all others segmentally welded.
www.anvilintl.com
12
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE T-3 REDUCING TEE W/ THREADED BRANCH NOMINAL SIZE (INCHES) 2x2
2½ x 2½
3x3
4x4
5x5
6x6
8x8
Revised:
x ¾* x 1* x1¼ x1½ x1 x 1¼ x1½ x2 x 1* x 1¼ x 1½* x2 x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x 2½ x3 x4 x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 50 x 50 x 20 50 x 50 x 25 50 x 50 x 32 50 x 50 x 40 65 x 65 x 25 65 x 65 x 32 65 x 65 x 40 65 x 65 x 50 80 x 80 x 25 80 x 80 x 32 80 x 80 x 40 80 x 80 x 50 80 x 80 x 65 100 x 100 x 25 100 x 100 x 32 100 x 100 x 40 100 x 100 x 50 100 x 100 x 65 100 x 100 x 80 125 x 125 x 25 125 x 125 x 32 125 x 125 x 40 125 x 125 x 50 125 x 125 x 65 125 x 125 x 80 125 x 125 x 100 150 x 150 x 25 150 x 150 x 32 150 x 150 x 40 150 x 150 x 50 150 x 150 x 65 150 x 150 x 80 150 x 150 x 100 150 x 150 x 125 200 x 200 x 40 200 x 200 x 50 200 x 200 x 65 200 x 200 x 80 200 x 200 x 100 200 x 200 x 125 200 x 200 x 150
2.68 3.00 3.00 3.00 4.40 4.40 4.40 4.40 6.47 6.05 6.27 6.05 6.05 10.47 10.98 10.98 10.98 10.98 10.98 13.95 13.95 13.95 13.95 32.95 13.95 13.95 25.25 25.25 25.25 25.25 26.50 25.25 25.25 25.25 42.16 42.16 42.16 42.16 42.16 42.16 42.16
$295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25 $340.75 $340.75 $340.75 $340.75 $340.75 $368.25 $368.25 $368.25 $368.25 $368.25 $368.25 $658.00 $658.00 $658.00 $658.00 $658.00 $658.00 $658.00 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $924.75 $1,134.00 $1,134.00 $1,134.00 $1,134.00 $1,639.25 $1,639.25 $1,639.25
$344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $344.50 $399.50 $399.50 $399.50 $399.50 $399.50 $474.25 $474.25 $474.25 $474.25 $474.25 $474.25 $825.75 $825.75 $825.75 $825.75 $825.75 $825.75 $825.75 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,147.50 $1,379.00 $1,453.00 $1,440.50 $1,453.00 $2,108.75 $2,123.25 $2,131.50
NOMINAL SIZE (INCHES)
10 x 10
12 x 12
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 250 x 40 250 x 250 x 50 250 x 250 x 65 250 x 250 x 80 250 x 250 x 100 250 x 250 x 125 250 x 250 x 150 250 x 250 x 200 300 x 300 x 50 300 x 300 x 65 300 x 300 x 80 300 x 300 x 100 300 x 300 x 125 300 x 300 x 150 300 x 300 x 200 300 x 300 x 250
69.25 69.25 69.25 69.25 69.25 69.25 69.25 69.25 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00
$1,975.25 $1,975.25 $1,975.25 $1,975.25 $2,111.25 $2,111.25 $2,111.25 $2,111.25 $2,659.75 $2,659.75 $2,659.75 $2,850.00 $2,850.00 $3,048.75 $3,134.75 $3,280.50
$2,439.00 $2,439.00 $2,439.00 $2,439.00 $2,716.75 $2,716.75 $2,716.75 $2,716.75 $3,419.00 $3,419.00 $3,419.00 $3,643.75 $3,896.25 $3,933.00 $4,023.25 $4,029.25
* Ductile iron, all others segmentally welded.
www.anvilintl.com
13
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE R-1 CONCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
Revised:
x1 x1 x 1¼ x 1* x 1¼* x 1½* x1 x 1¼ x 1½ x 2* x1 x 1¼ x 1½ x 2* x 2½* x1 x 1¼ x 1½* x 2* x 2½ x 3* x 3½ x1 x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x 2* x 2½* x 3* x 4* x5 x 1½ x2 x 2½ x 3* x 4* x5 x 6*
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 100 x 90 125 x 25 125 x 32 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
0.85 0.73 0.95 0.80 0.79 0.79 1.50 1.50 1.50 1.91 2.35 2.35 2.35 1.41 1.50 3.21 3.21 2.66 2.51 3.21 2.55 1.00 4.84 4.84 4.84 4.84 4.84 4.84 4.84 7.50 7.50 7.50 6.34 5.10 4.29 7.50 7.50 9.07 9.07 9.07 9.15 9.07 9.07 9.07
$103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $103.25 $113.50 $113.50 $113.50 $113.50 $113.50 $120.25 $120.25 $120.25 $120.25 $150.00 $150.00 $150.00 $209.50 $209.50 $209.50 $209.50 $209.50 $209.50 $209.50 $278.00 $278.00 $278.00 $278.00 $278.00 $278.00 $278.00 $358.00 $496.50 $496.50 $496.50 $496.50 $496.50 $496.50 $632.50
$120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $120.25 $137.00 $137.00 $137.00 $137.00 $137.00 $148.75 $148.75 $148.75 $148.75 $183.00 $183.00 $183.00 $261.50 $261.50 $261.50 $261.50 $261.50 $261.50 $261.50 $345.25 $345.25 $345.25 $345.25 $345.25 $345.25 $445.00 $445.00 $624.00 $624.00 $624.00 $624.00 $624.00 $624.00 $788.00
NOMINAL SIZE (INCHES)
10
12
x 1½ x2 x 2½ x3 x4 x5 x6 x 8* x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
16.38 16.38 16.38 16.38 16.38 16.38 16.38 23.10 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $1,179.75 $2,599.50 $1,290.00 $1,290.00 POA POA POA POA $2,311.25 $2,311.25 $2,311.25 $2,311.25 $2,311.25
POA POA POA POA $1,447.25 $2,953.00 $1,602.75 $1,629.25 POA POA POA POA $2,717.25 $2,717.25 $2,717.25 $2,717.25 $2,717.25
* Ductile iron Segmentally welded through 4 x 3 unless *Ductile Iron. Forged Steel 5 x 1 and larger unless *Ductile Iron.
www.anvilintl.com
14
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Fittings for Grooved-End Pipe STYLE R-2 ECCENTRIC REDUCER NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
4
5
6
8
x1 x1 x 1¼ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½* x1 x 1¼ x 1½ x2 x 2½ x 3* x1 x 1½ x2 x 2½ x3 x4 x1 x 1½ x2 x 2½ x3 x 4* x5 x 1½ x2 x 2½ x3 x4 x5 x6
CONTINUED
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 25 125 x 40 125 x 50 125 x 65 125 x 80 125 x 100 150 x 25 150 x 40 150 x 50 150 x 65 150 x 80 150 x 100 150 x 125 200 x 40 200 x 50 200 x 65 200 x 80 200 x 100 200 x 125 200 x 150
1.25 1.30 1.30 1.40 1.00 1.00 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.00 3.21 3.21 3.21 3.21 3.21 4.84 4.84 4.84 4.84 4.84 4.84 6.00 7.50 7.50 7.50 7.50 7.50 7.50 9.07 9.07 9.07 9.07 9.07 9.07 9.07
$423.75 $423.75 $414.75 $468.00 $513.25 $429.50 $1,326.00 $644.25 $429.50 $430.00 $1,420.25 $1,269.00 $590.50 $556.25 $556.25 $2,851.75 $2,851.75 $1,456.75 $1,411.25 $556.25 $556.25 POA POA $2,693.75 $1,368.75 $1,322.50 $1,041.00 $2,497.00 POA $2,277.25 $2,529.75 $1,303.50 $1,070.25 $855.50 POA POA POA $2,645.50 $2,312.00 $2,152.50 $929.50
$495.00 $495.00 $477.50 $524.00 $563.25 $494.50 $1,803.75 $727.50 $580.75 $627.50 $2,081.25 $1,179.75 $686.25 $814.75 $814.75 $3,878.25 $3,878.25 $1,566.25 $1,920.50 $754.50 $757.00 POA POA $3,664.00 $1,468.75 $1,468.25 $1,416.25 $2,698.25 POA $2,468.00 $2,938.75 $1,898.00 $1,455.25 $1,164.50 POA POA POA $2,787.75 $2,625.00 $2,461.75 $1,260.25
NOMINAL SIZE (INCHES)
10
12
16.38 16.38 16.38 16.38 16.38 16.38 16.38 16.38 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00
POA POA POA POA $4,242.00 $3,996.00 $3,013.50 $2,551.00 POA POA POA POA $4,645.50 $3,840.25 $4,025.75 $3,923.00 $3,513.75
POA POA POA POA $5,064.50 $4,681.50 $3,556.00 $3,158.00 POA POA POA POA $6,483.00 $5,381.00 $4,826.25 $4,673.75 $4,147.50
STYLE R-3 CONCENTRIC REDUCER GROOVE X THREAD NOMINAL SIZE (INCHES) 1¼ 1½ 2
2½
3
5
6
250 x 40 250 x 50 250 x 65 250 x 80 250 x 100 250 x 125 250 x150 250 x 200 300 x 25 300 x 50 300 x 65 300 x 80 300 x 100 300 x 125 300 x 150 300 x 200 300 x 250
* Ductile iron, all others segmentally welded.
4
Revised:
x 1½ x2 x 2½ x3 x4 x5 x6 x8 x1 x2 x 2½ x3 x4 x5 x6 x8 x 10
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV.
www.anvilintl.com
x1 x1 x 1¼ x 1* x 1¼* x 1½ * x1 x 1¼ x 1½ x2 x 1* x 1¼ x 1½ x 2* x 2½ x 1* x 1¼ x 1½ x2 x 2½ x3 x4 x1 x 1¼ x 1½ x2 x3 x 4*
PRICE EACH NOMINAL SIZE WEIGHT (MM) EACH (LBS) PAINTED GALV. 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 65 x 50 80 x 25 80 x 32 80 x 40 80 x 50 80 x 65 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 100 x 80 125 x 100 150 x 25 150 x 32 150 x 40 150 x 50 150 x 80 150 x 125
0.95 0.95 0.95 1.00 1.00 0.79 1.50 1.50 1.50 1.50 2.35 2.35 2.35 2.35 2.35 3.21 3.21 3.21 3.21 3.21 3.21 4.84 6.00 6.00 6.00 7.50 7.50 7.50
$101.50 $101.50 $101.50 $101.50 $101.50 $101.50 $152.25 $152.25 $152.25 $101.50 $111.75 $111.75 $126.00 $126.00 $152.25 $144.50 $144.50 $144.50 $152.75 $154.75 $188.00 $1,086.50 $295.25 $295.25 $295.25 $295.25 $295.25 $295.25
$125.75 $125.75 $125.75 $125.75 $125.75 $125.75 $179.75 $179.75 $179.75 $179.75 $150.25 $150.25 $150.25 $150.25 $179.75 $189.50 $189.50 $189.50 $189.50 $189.50 $223.75 $1,176.75 $361.25 $361.25 $361.25 $361.25 $361.25 $361.25 15
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Mechanical Branch Tees STYLE MT-1 THREADED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 2 2½
3
4
5 6
x1 x 1¼ x 1½ x1 x 1¼ x 1½ x1 x 1¼ x 1½ x2 x1 x 1¼ x 1½ x2 x 2½ x 1½ x2 x 2½ x 1½ x2 x 2½
50 x 25 50 x 32 50 x 40 65 x 25 65 x 32 65 x 40 80 x 25 80 x 32 80 x 40 80 x 50 100 x 25 100 x 32 100 x 40 100 x 50 100 x 65 125 x 40 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65
WEIGHT EACH (LBS) 1.70 1.70 1.70 3.60 3.60 3.60 3.80 3.30 3.80 4.40 4.60 4.60 4.60 4.80 5.40 7.40 7.90 7.90 7.50 8.00 8.00
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
³ ⁄₈ x 2 ³ ⁄₈ x 2 ³ ⁄₈ x 2 ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4
PAINTED $27.50 $27.50 $27.50 $30.00 $32.75 $31.25 $35.25 $36.25 $36.25 $40.50 $40.75 $40.75 $42.75 $44.50 $44.50 $52.00 $52.00 $55.00 $53.00 $53.00 $57.75
GALV. $40.75 $40.75 $40.75 $50.00 $50.00 $50.00 $52.00 $52.00 $52.00 $59.75 $60.25 $60.25 $60.25 $66.50 $66.50 $77.25 $77.25 $81.75 $79.00 $79.00 $85.50
BOX 22 22 22 16 16 16 10 10 10 10 7 7 7 6 6 4 4 4 4 4 3
QUANTITY CRATE 792 792 792 576 576 576 360 360 360 360 252 252 252 216 216 144 144 144 144 144 108
*** All MT-1 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
STYLE MT-2 GROOVED MECHANICAL BRANCH TEE*** NOMINAL SIZE NOMINAL (INCHES) SIZE (MM) 3 4 5
6
x 1½ x2 x 1½ x2 x 2½ x3 x2 x 2½ x 1½ x2 x 2½ x3 x4
80 x 40 80 x 50 100 x 40 100 x 50 100 x 65 100 x 80 125 x 50 125 x 65 150 x 40 150 x 50 150 x 65 150 x 80 150 x100
WEIGHT EACH (LBS) 3.80 4.40 4.60 4.80 5.40 7.60 7.90 7.90 8.00 8.00 8.00 9.70 13.60
PLATED NUT AND BOLT ONLY NO. SIZE (INCHES) 2 2 2 2 2 2 2 2 2 2 2 2 2
½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 2¾ ½ x 3¼ ½ x 3¼ 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4 5⁄₈ x 4
PAINTED
GALV.
$35.25 $40.50 $42.50 $44.50 $44.00 $47.75 $57.75 $57.75 $56.75 $57.75 $57.75 $61.00 $67.25
$52.25 $59.75 $63.00 $66.50 $66.00 $70.75 $85.50 $85.50 $84.75 $85.50 $85.50 $85.50 $100.75
BOX 10 10 7 7 6 6 4 4 4 4 4 3 3
QUANTITY CRATE 360 360 252 252 216 216 144 144 144 144 144 108 108
*** All MT-2 branches can be used as mechanical crosses, increase price of largest outlet by 50%.
q — Sold in box only
Revised:
www.anvilintl.com
16
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Mechanical Branch Tees STYLE MT-30 THREADED MECHANICAL BRANCH TEE NOMINAL SIZE NOMINAL SIZE (INCHES) (MM) 1¼ 1½ 2 2½
x½ x¾ x1 x½ x¾ x1 x½ x¾ x1 x½ x¾ x1
32x15 32x20 32x25 40x15 40x20 40x25 50x15 50x20 50x25 65x15 65x20 65x25
WEIGHT EACH (LBS) 0.83 0.87 0.97 0.64 0.93 0.96 0.84 0.95 0.96 0.89 0.95 1.03
COMPLETE PLATED
$13.00 $13.00 $13.50 $13.50 $13.50 $13.50 $14.50 $14.50 $14.50 $16.25 $16.25 $16.25
QUANTITY BOX
CRATE
50 50 50 50 50 50 45 45 45 40 40 40
1,800 1,800 1,800 1,800 1,800 1,800 1,620 1,620 1,620 1,440 1,440 1,440
Note: BSP equivalent is available as MT-90.
q — Sold in box only
Revised:
www.anvilintl.com
17
GROOVED FIRE PRODUCTS PriceList Effective Date: May 12, 2014 | Replaces Prior Date: May 2013 | Sheet # SPF.GRFP-5.14
Spare Parts / Lubricants Plated Trackhead Bolts and Nuts for Couplings BOLT AND NUT SIZE (INCHES) PRICE EACH ³ ⁄₈ x 2 ⁄³ ₈ x 2¼ ³ ⁄₈ x 2½
$14.25 $14.25 $21.25 $15.75 $15.00 POA $23.00 $18.50 $19.50 $20.50 POA $26.25 $41.50 $41.50 $41.50 $49.00
½ x 2¾ ½x3 ½ x 3¼ ½ x 3½ ⁵ ⁄₈ x 2¾ ⁵ ⁄₈ x 3¼ ⁵ ⁄₈ x 3½ ⁵ ⁄₈ x 4 ⁵ ⁄₈ x 4¼ ¾ x 4¼ ¾ x 4½ ⁷⁄₈ x 5 ⁷⁄₈ x 5½
C-1, C-3, C-4 & F-3 Gaskets C-1, C-3, C-4 NOMINAL SIZE FLUSH GAP (INCHES) GASKET 1¼ 1½ 2 2½ 3 4 5 6 8 10 12
LUBRICANTS STANDARD LUBRICANT 2LB Tub Std Gruvlok Lubricant 5 Gallon Pail
$190.50 / tub
QUICK DRY LUBRICANT 1 Quart Can
$204.50
1 Gallon Pail
$346.00
XTREME LUBRICANT (SILICONE) 2.2 lb. Tub (Gruvlok Lubricant)
Revised:
$14.75 $16.00 $18.50 $21.50 $29.75 POA $51.50 $81.25 -
$13.25 $14.50 $17.50 $24.00 POA $41.50 $65.25 $191.75 $250.75
$95.50 $332.25
E TYPE A GASKET $9.00 $9.25 $9.75 $11.00 $13.50 $18.25 POA $31.25 $49.00 $144.25 $188.00
NOMINAL SIZE (INCHES) 2 x 1½ 2½ x 2 3x2 3 x 2½ 4x2 4 x 2½ 4x3 5x4 6x4 8x6
RC-2 “E” GASKET $18.75 $24.00 $27.75 $23.75 $43.50 $39.00 $36.50 POA $74.25 $111.25
STANDARD LUBRICANT USAGE GUIDE
XTREME LUBRICANT USAGE GUIDE
NUMBER OF GASKETS
NUMBER OF GASKETS PER QUART 1,200 900 600 390 300 255 180 150 120 105 90 60
PRICE $1,603.00
10 oz. Tube (1 each)
F-3 “E” GASKET
RC-2 Gaskets
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
PER TUBE 55 45 25 20 15 10 9 7 6 5 4
www.anvilintl.com
3
PER QUART 400 300 200 130 100 85 60 50 40 35 30 20
SIZE OF GASKET 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
18
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
CUSTOMER SERVICE CENTERS UNITED STATES
EUROPE AND MIDDLE EAST
Tinley Park, IL Tel: 708-885-3000 • Fax: 708-534-5441 Toll Free: 1-800-301-2701
Tel: +31-53-5725570 • Fax: +31-53-5725579 International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
Irving, TX Tel: 972-871-1206 • Fax: 972-641-8946 Toll Free: 1-800-451-4414
MEXICO, PUERTO RICO AND LATIN AMERICA International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
CANADA Simcoe, Ontario Tel: 519-426-4551 • Fax: 519-426-5509
U.S. REGIONAL DISTRIBUTION CENTERS TINLEY PARK
7979 West 183rd Street, Unit D Tinley Park, IL 60477
IRVING
1401 Valley View Lane, Suite 150 Irving, TX 75061
COLUMBIA
800 Malleable Road Columbia, PA 17512
ONTARIO
1470 S. Vintage Avenue Ontario, CA 91761
ANVIL EPS Engineered Pipe Supports Customer Service Center 160 Frenchtown Road North Kingstown, RI 02852 Tel: 401-886-3000 Fax: 401-886-3010 Toll Free: 1-877-406-3108
additional INVENTORY LOCATIONS* UNITED STATES: Arizona, Colorado, Georgia, Indiana, Massachusetts, Minnesota, Missouri, New York, Tennessee, Texas, Washington and Wisconsin
INTERNATIONAL: Ontario, Canada
#778 / Printed in USA / ©2014 Revision: April 16, 2014
*Inventory varies at locations B U I L D I N G
C O N N E C T I O N S
T H A T
L A S T North Alabama Pipe
www.anvilintl.com
