GSA Powder Mastic Tile Adhesive
POWDER MASTIC TILE ADHESIVE Description GSA Powder Mas.c is a polymer modified cement based .le adhesive. Non slump proper.es make it perfect for wall .ling and large format .les. Smooth troweling and extended adjustment .me of 30 minutes makes it easy to use. Features & Benefits ♦ Featuring Dustless Technology ♦ Interior and exterior applications ♦ Wall and floor tiles ♦ Domestic and light duty commercial work ♦ A variety of substrates and tiles ♦ Use over flexible and rigid building boards ♦ Suitable for translucent and light coloured tiles Types of Tiles Excellent adhesion proper.es makes it suitable to use on a wide range of .le types such as porcelain, ceramic, vitrified, mosaic, terracotta, slate, quarry, granite and marble, with the excep.on of moisture sensi.ve stone such as green marble.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Substrates Ideal to use on concrete, cement renders, screeds, block work, rendered brickwork, fibre cement sheet, gyprock and compa.ble waterproofing membranes. Also suitable to use on correctly installed compressed fibre cement sheet floor system that have been approved for .ling and timber floors provided that a fibre cement sheet .le underlay is first installed. Pot Life Long reposi.oning .me with extended open .me of 30 min, which provides greater fixing efficiency over large areas, therefore increasing produc.vity. The mixed mortar remains useable in a container for up to 2 hours at 20oC, prolonging its usefulness therefore there is less waste which saves you money. Uses Suitable for use on walls and floors in interior and exterior applica.ons. Can be used to fix .les onto concrete, cement renders, screeds, block work, rendered brickwork, fibre cement sheet, plasterboard and suitable waterproofing membranes. GSA Powder mas.c can be used on correctly installed compressed fibre cement sheet floor systems that have been approved for .ling. It is suitable for .ling over .mber floors, provided that a fibre cement sheet .le underlay is first installed. Recommended for the fixing of all types of ceramic, mosaic, vitrified, porcelain, terracotta, slate, quarry, granite and marble .les (with the excep.on of green marbles). It is well suited for use with light coloured stone.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Surface Prepara;on ♦ All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and any other loose or contaminating materials. ♦ Painted surfaces must be abraded to expose at least 80% of the original substrate. ♦ New render/screed surfaces must be allowed to cure for at least 7 days and have a wood float finish. ♦ All building boards must be firmly fixed according to the manufacturer’s instruc.ons and the relevant ♦ Australian Standard(s). ♦ Old render/screed surfaces must be thoroughly cleaned prior to .ling and have a wood float finish. ♦ New concrete must be allowed to cure for 6 weeks and should have a wood float finish. ♦ Steel trowel finished concrete must be mechanically abraded prior to .ling. ♦ Old concrete surfaces must be thoroughly cleaned prior to .ling. ♦ Make sure all release agents are removed from concrete surfaces, especially on .lt-up slabs. Movement Joints ♦ Movement joints must be installed as s.pulated by AS3958 – Guide to the Installa.on of Ceramic Tiles. ♦ Failure to do so may result in drummy or li`ing .les. Movement joints should be provided as follows: ♦ Over movement joints in the substrates. ♦ At a junc.on between different substrate materials. ♦ At fixtures interrup.ng the .le surface e.g. columns.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
♦ ♦ ♦ ♦
At internal ver.cal corners. Around the perimeter of the .ling system. At a maximum of 5 meter intervals in a grid pabern. Movement joints should be kept free from dirt and adhesive droppings.
Note: Movement joints must not be less than 6mm nor greater than 10mm wide Mixing The mixing ra.o is 20kg to approximately 5-6 litres of clean potable water. Place the mixing water in the bucket and add the powder to the water, mixing un.l it has a thick and creamy consistency. Allow to stand for 5 minutes and remix briefly before using. Always make sure it is fully mixed (no lumps) before using. Mix mechanically with a drill and paddle. Do not mix by hand Cleaning Avoid letting excessive adhesive dry as it is easiest to remove when it is fresh. Remove wet product with a damp cloth. Clean tools and equipment with water. If allowed to dry it will need to be removed mechanically or using a suitable acid based product. In some cases these methods can affect the .le and should be avoided whenever possible. Packaging & Shelf Life GSA Powder Mastic is available in 20kg bags. The shelf life is up to 12 months when stored unopened in elevated, cool and dry condi.ons
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Technical Data Bulk Density: 1.5 kg/L Open Time at 20°C (primed surface): 30 minutes Adjustment Time at 20°C: 30 minutes Pot Life at 20°C: >2 hours Ready for Grou.ng at 20°C: 24 hours Ready for Service at 10°C-20°C: 24 hours Disclaimer Campbell Wholesale Pty Ltd believes that the informa.on in this technical data sheet is an accurate descrip.on of the typical uses of the product. The data and statements are based on our research and development work and is to the best of our knowledge true and accurate. The user must ensure of the product(s) in their applica.on prior to use in par.cular to determine its performance, efficiency and safety. The use of this product is beyond the manufacturer’s control, and liability is restricted to the replacement of material proven faulty. The manufacturer is not responsible for any loss or damage arising from incorrect usage. Products conform solely to the informa.on contained in this and other related Campbells Wholesale Pty Ltd publica.ons. Campbells Wholesale Pty Ltd reserves the right to make changes to specifica.ons and informa.on related to the products at any .me. Users are asked to check that the literature in their possession is the latest issue.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Statements contained herein should not be considered as a warranty of any kind, expressed or implied in describing the performance or suitability of the product for a par.cular applica.on. No liability is accepted for infringement of any patents or any other intellectual property right.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Substrates Ideal to use on concrete, cement renders, screeds, block work, rendered brickwork, fibre cement sheet, gyprock and compa.ble waterproofing membranes. Also suitable to use on correctly installed compressed fibre cement sheet floor system that have been approved for .ling and timber floors provided that a fibre cement sheet .le underlay is first installed. Pot Life Long reposi.oning .me with extended open .me of 30 min, which provides greater fixing efficiency over large areas, therefore increasing produc.vity. The mixed mortar remains useable in a container for up to 2 hours at 20oC, prolonging its usefulness therefore there is less waste which saves you money. Uses Suitable for use on walls and floors in interior and exterior applica.ons. Can be used to fix .les onto concrete, cement renders, screeds, block work, rendered brickwork, fibre cement sheet, plasterboard and suitable waterproofing membranes. GSA Powder mas.c can be used on correctly installed compressed fibre cement sheet floor systems that have been approved for .ling. It is suitable for .ling over .mber floors, provided that a fibre cement sheet .le underlay is first installed. Recommended for the fixing of all types of ceramic, mosaic, vitrified, porcelain, terracotta, slate, quarry, granite and marble .les (with the excep.on of green marbles). It is well suited for use with light coloured stone.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Surface Prepara;on ♦ All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and any other loose or contaminating materials. ♦ Painted surfaces must be abraded to expose at least 80% of the original substrate. ♦ New render/screed surfaces must be allowed to cure for at least 7 days and have a wood float finish. ♦ All building boards must be firmly fixed according to the manufacturer’s instruc.ons and the relevant ♦ Australian Standard(s). ♦ Old render/screed surfaces must be thoroughly cleaned prior to .ling and have a wood float finish. ♦ New concrete must be allowed to cure for 6 weeks and should have a wood float finish. ♦ Steel trowel finished concrete must be mechanically abraded prior to .ling. ♦ Old concrete surfaces must be thoroughly cleaned prior to .ling. ♦ Make sure all release agents are removed from concrete surfaces, especially on .lt-up slabs. Movement Joints ♦ Movement joints must be installed as s.pulated by AS3958 – Guide to the Installa.on of Ceramic Tiles. ♦ Failure to do so may result in drummy or li`ing .les. Movement joints should be provided as follows: ♦ Over movement joints in the substrates. ♦ At a junc.on between different substrate materials. ♦ At fixtures interrup.ng the .le surface e.g. columns.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
♦ ♦ ♦ ♦
At internal ver.cal corners. Around the perimeter of the .ling system. At a maximum of 5 meter intervals in a grid pabern. Movement joints should be kept free from dirt and adhesive droppings.
Note: Movement joints must not be less than 6mm nor greater than 10mm wide Mixing The mixing ra.o is 20kg to approximately 5-6 litres of clean potable water. Place the mixing water in the bucket and add the powder to the water, mixing un.l it has a thick and creamy consistency. Allow to stand for 5 minutes and remix briefly before using. Always make sure it is fully mixed (no lumps) before using. Mix mechanically with a drill and paddle. Do not mix by hand Cleaning Avoid letting excessive adhesive dry as it is easiest to remove when it is fresh. Remove wet product with a damp cloth. Clean tools and equipment with water. If allowed to dry it will need to be removed mechanically or using a suitable acid based product. In some cases these methods can affect the .le and should be avoided whenever possible. Packaging & Shelf Life GSA Powder Mastic is available in 20kg bags. The shelf life is up to 12 months when stored unopened in elevated, cool and dry condi.ons
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Technical Data Bulk Density: 1.5 kg/L Open Time at 20°C (primed surface): 30 minutes Adjustment Time at 20°C: 30 minutes Pot Life at 20°C: >2 hours Ready for Grou.ng at 20°C: 24 hours Ready for Service at 10°C-20°C: 24 hours Disclaimer Campbell Wholesale Pty Ltd believes that the informa.on in this technical data sheet is an accurate descrip.on of the typical uses of the product. The data and statements are based on our research and development work and is to the best of our knowledge true and accurate. The user must ensure of the product(s) in their applica.on prior to use in par.cular to determine its performance, efficiency and safety. The use of this product is beyond the manufacturer’s control, and liability is restricted to the replacement of material proven faulty. The manufacturer is not responsible for any loss or damage arising from incorrect usage. Products conform solely to the informa.on contained in this and other related Campbells Wholesale Pty Ltd publica.ons. Campbells Wholesale Pty Ltd reserves the right to make changes to specifica.ons and informa.on related to the products at any .me. Users are asked to check that the literature in their possession is the latest issue.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
Statements contained herein should not be considered as a warranty of any kind, expressed or implied in describing the performance or suitability of the product for a par.cular applica.on. No liability is accepted for infringement of any patents or any other intellectual property right.
WA Phone - (08) 9353 3354 VIC Phone - (03) 9763 4433 NSW Phone - (02) 9673 1322 [email protected]
