H-Series Circuit Breaker
The H-Series hydraulic/magnetic circuit breaker provides dependable circuit protection in a low cost, compact package. By meeting the IEC spacing requirements, the H-Series is the ideal choice for international market applications. It also features a “trip-free” mechanism, which will open the contacts when a fault condition occurs, even if the handle is held in the ON position. Although a low cost option, the H-Series was designed for maximum performance and reliable equipment protection meeting Carling’s stringent quality standards. Key Features & Benefits:
Choice of actuator styles UL1077, CCC, CSA, C22.2 and EN60934 approvals Compact size Temperature stable operation -40˚c to 80˚c Choice of terminals, including PCB Single or multi-pole configurations
HANDLE ACTUATOR
CURVED ROCKER ACTUATOR
FLAT WITH PUSH–TO–RESET ACTUATOR
Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email:
[email protected] • www.carlingtech.com
CURVED ROCKER WITH GUARD
2 | H-Series – General Specifications
Electrical Tables
Table A: Lists UL Recognized, CSA Accepted and TUV Certified configurations and performance capabilities as a Component Supplementary Protector. H SERIES - COMPONENT SUPPLEMENTARY PROTECTOR CIRCUIT CONFIGURATION
SERIES
VOLTAGE
CURRENT
SHORT CIRCUIT CAPACITY (AMPS)
MAX RATING
FREQ.
PHASE
65
DC
--
65
DC
--
80
DC
--
DC
--
250
50/60
1
250
50/60
1
250
50/60
3
80
1
FULL LOAD 1 - 32
MINIMUM POLES
UL WITHOUT BACKUP FUSE
CSA WITHOUT BACKUP FUSE
TUV WITHOUT BACKUP FUSE
1
3000
3000
1500(PC1)
1
---
500
1
1000
800
1
1000
1000
1000(PC1)
TC1, OL1, U3
TC1, OL1, U3
1
1500
1500
1000(PC1)
TC1, OL1, U1
TC1, OL1, U1
2
1500
1500
1000(PC1)
TC1, OL1, U3
TC1, OL1, U3
3
1500
1500
1000(PC1)
TC1, OL0, U3
TC1, OL0, U3
1 - 32 1 - 25
26 - 32 1 - 32 1 - 32 1 - 32
APPLICATION CODES
UL
CSA
TC1, OL1, U1
TC1, OL1, U1
---
---
TC1, OL1, U3
1000(PC1)
TC1, OL1, U1
TC1, OL1, U1
1 - Polarity Sensitive
Electrical
Typical Protector Resistance
Maximum Voltage Current Ratings Auxiliary Switch Rating
250VAC 50/60Hz 80 VDC Standard current coils: 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 32.0 SPDT: 10.1A-250VAC, 1.0A-65VDC/0.5A-80VDC, 0.1A-125VAC (with gold contacts)
Mechanical Endurance 10,000 ON-OFF operations @ 6 per minute; with rated current & voltage
Physical Number of Poles Weight Internal Circuit Config.
1-3 Approx. 48 grams/pole (1.7 oz) Series and Switch Only (with or without auxiliary switch)
Agency Approvals
DCR and Impedance values are based on measurements by the voltmeter ammeter method. Rated current is applied for one hour and at a voltage not less than 20 volts. Ambient temperature: 25 ℃; Tolerance: Below 10 amps +/- 25%; Above 10 amps +/-35%
Impedance Chart Current rating in amperes
Series DC-Ohms
50/60Hz-Ohms
1
0.85
0.87
2.5
0.13
0.15 0.036
5
0.035
7.5
0.018
0.019
10
0.01
0.011
15
0.006
0.0061
20
0.005
0.0051
25
0.003
0.0035
30
0.0025
0.0026
UL Recognized under the Component Recognition Program as Protectors, Supplementary (Guide QVNU2 File E75596) UL standard 1077 CCC certified, Certificate No. 2010010307447291 CSA Accepted Supplementary Protector CSA standard C22.2 No. 235 TUV certified to EN60934, Certificate No. R50204086
*Manufacturer reserves the right to change product specification without prior notice.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
H-Series Handle Actuator – Ordering Scheme | 3
H A 3
1 Series
2 Actuator
B 0
4 Circuit
3 Poles
24
5 Aux/Alarm Switch
6 Frequency & Delay
2 ACTUATOR1
B
Handle, one per pole
3 POLE2 1
2
One
5 AUXILIARY/ALARM SWITCH 0 13 23
w/o Aux Switch 0.110 Q.C. term 0.110 Solder Lug
6 FREQUENCY & DELAY 033 10 11 12 14 16 20 21 22 24 26
3 C4 G4
Switch Only (no coil) Series Trip (current)
33 43
30 31 32 34 36 424 444 464 524 544 564
DC 50/60Hz, Switch Only DC Instantaneous DC Ultra Short DC Short DC Medium DC Long 50/60Hz Instantaneous 50/60Hz Ultra Short 50/60Hz Short 50/60Hz Medium 50/60Hz Long
1 2 3 A B
Handle, one per unit
Two
4 CIRCUIT A B
Three
Series Trip (voltage) Relay Trip (voltage)
0.110 Q.C. term w/ gold contacts 0.110 PC term
DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60Hz Short, Hi-Inrush 50/60Hz Medium, Hi-Inrush 50/60Hz Long, Hi-Inrush DC Short, Hi-Inrush DC Medium, Hi-Inrush DC Long, Hi-Inrush
7 CURRENT RATING (AMPERES) 5
CODE
AMPERES
410 1.000 440 512 1.250 445 415 1.500 450 517 1.750 455 420 2.000 460 522 2.250 465 425 2.500 470 527 2.750 475 430 3.000 480 435 3.500 485 VOLTAGE RATING CODE
A06 A12 A18 A24 A32 A48
RATING
6DC 12DC 18DC 24DC 32DC 48DC
1 B 1
8 Terminal
9 Actuator Color & Legend
TRIP
5DC 10DC 15DC 20DC 25DC 40DC
490 495 610 710 611 711 612 712 613 614
4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 VOLTS
A65 J06 J12 J18 J24 J48
65DC 6AC 12AC 18AC 24AC 48AC
615 616 617 618 620 622 624 625 630 632
9.000 9.500 10.000 10.500 11.000 11.500 12.000 12.500 13.000 14.000
55DC 5AC 10AC 15AC 20AC 40AC
J65 K20 L40 B10 B20
15.000 16.000 17.000 18.000 20.000 22.000 24.000 25.000 30.000 32.000
65AC 120AC 240AC 110DC 120DC
55AC 65AC 130AC 59DC 65DC
Push ON 0.250 Tab (Q.C.) Screw 8-32 w/upturned lugs Screw 8-32 (bus type) Screw M4 w/upturned lugs Screw M4 (bus type)
L R S T
11 Rating
Printed Circuitboard Terminals
Dual 1 2 3 4 5 6 7 8
Legend Color Black White White White White Black Black Black
BARRIERS
BEZEL
no yes no yes no yes no yes
domed domed domed domed flat flat flat flat
11 MAX. APPLICATION RATING A 65DC D 250AC M
80DC 6
12 Agency Approval
90 Facing Left 90 Facing Right Straight Straight, Long
9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White A B Black C D Red F G Green H J Blue K L Yellow M N Gray P Q Orange R S 10 MOUNTING/BARRIERS MOUNTING STYLE Threaded Insert 1 6-32 x 0.195 inches A 6-32 x 0.195 inches 2 ISO M3 x 5mm B ISO M3 x 5mm 3 6-32 x 0.195 inches C 6-32 x 0.195 inches 4 ISO M3 x 5mm D ISO M3 x 5mm
D C
10 Mounting Bezel/Barrier
8 TERMINAL
1 SERIES H A
450
7 Current Rating
4
80VDC/250VAC7
12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted, CCC Certified E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified Notes: 1 Actuator Option A: handle tie pin, spacer & retainers provided unassembled on multipole units. Actuator Option B: Handle location as viewed from front of panel: 2 pole: left pole; 3 pole: center pole 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available w/ Agency code C. 5 For other current ratings, consult factory. 6 26-32A Polarity sensitive, only available as 1 pole unit. 7 Voltage code 4 available to 25A max.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
4 | H-Series Curved Rocker Actuator – Ordering Scheme
H J 3
1 Series
2 Actuator
B 0
4 Circuit
3 Poles
10
5 Aux/Alarm Switch
6 Frequency & Delay
1 SERIES (VISI ROCKER) H K
Vertical - Indicate OFF
3 POLE2 1
2
One
5 AUXILIARY/ALARM SWITCH 0 13 23
w/o Aux Switch 0.110 Q.C. term 0.110 Solder Lug
6 FREQUENCY & DELAY 033 10 11 12 14 16 20 21 22 24 26
3 C4 G4
Switch Only (no coil) Series Trip (current)
33 43
30 31 32 34 36 424 444 464 524 544 564
DC 50/60Hz, Switch Only DC Instantaneous DC Ultra Short DC Short DC Medium DC Long 50/60Hz Instantaneous 50/60Hz Ultra Short 50/60Hz Short 50/60Hz Medium 50/60Hz Long
1 2 3 A B
Vertical - Indicate ON
Two
4 CIRCUIT A B
AMPERES
410 1.000 450 5.000 512 1.250 455 5.500 415 1.500 460 6.000 517 1.750 465 6.500 420 2.000 470 7.000 522 2.250 475 7.500 425 2.500 480 8.000 527 2.750 485 8.500 430 3.000 490 9.000 435 3.500 495 9.500 440 4.000 610 10.000 445 4.500 710 10.500 VOLTAGE RATING CODE
A06 A12 A18 A24 A32 A48
RATING
6DC 12DC 18DC 24DC 32DC 48DC
TRIP
5DC 10DC 15DC 20DC 25DC 40DC
9 Actuator Color & Legend
VOLTS
A65 J06 J12 J18 J24 J48
611 711 612 712 613 614 615 616 617 618 619 620
Series Trip (voltage) Relay Trip (voltage)
0.110 Q.C. term w/ gold contacts 0.110 PC term
DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60Hz Short, Hi-Inrush 50/60Hz Medium, Hi-Inrush 50/60Hz Long, Hi-Inrush DC Short, Hi-Inrush DC Medium, Hi-Inrush DC Long, Hi-Inrush
65DC 6AC 12AC 18AC 24AC 48AC
11.000 11.500 12.000 12.500 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000
55DC 5AC 10AC 15AC 20AC 40AC
J65 K20 L40 B10 B20
621 622 623 624 625 626 627 628 629 630 632
21.000 22.000 23.000 24.000 25.000 26.000 27.000 28.000 29.000 30.000 32.000
65AC 120AC 240AC 110DC 120DC
Push ON 0.250 Tab (Q.C.) Screw 8-32 w/upturned lugs Screw 8-32 (bus type) Screw M4 w/upturned lugs Screw M4 (bus type)
55AC 65AC 130AC 59DC 65DC
10 MOUNTING/BARRIERS6 MOUNTING STYLE Threaded Insert 1 6-32 x 0.195 inches A 6-32 x 0.195 inches 2 ISO M3 x 5mm B ISO M3 x 5mm 3 6-32 x 0.195 inches C 6-32 x 0.195 inches 4 ISO M3 x 5mm D ISO M3 x 5mm 5 6-32 x 0.195 inches E 6-32 x 0.195 inches 6 ISO M3 x 5mm F ISO M3 x 5mm 7 6-32 x 0.195 inches G 6-32 x 0.195 inches 8 ISO M3 x 5mm H ISO M3 x 5mm 9 6-32 x 0.195 inches J 6-32 x 0.195 inches P ISO M3 x 5mm K ISO M3 x 5mm Q 6-32 x 0.195 inches L 6-32 x 0.195 inches U ISO M3 x 5mm M ISO M3 x 5mm
L R S T
BARRIERS no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes
11 MAX. APPLICATION RATING A 65DC D 250AC M
D C
10 Mounting Bezel/Barrier
11 Rating
12 Agency Approval
Printed Circuitboard Terminals
90 Facing Left 90 Facing Right Straight Straight, Long
9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White A B Red F G Green H J Blue K L Yellow M N Gray P Q Orange R S
Three
7 CURRENT RATING (AMPERES) 5
CODE
1 B 1
8 Terminal
8 TERMINAL
2 ACTUATOR1 J
450
7 Current Rating
Dual 2 3 4 5 6 7 8
HALF ROCKER GUARD no no no no yes yes yes yes no no no no yes yes yes yes no no no no yes yes yes yes
80DC 7
4
BRACKET COLOR Black Black Black Black Black Black Black Black White White White White White White White White Gray Gray Gray Gray Gray Gray Gray Gray
80VDC/250VAC8
12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified
Notes: 1 Half guard construction have OFF protection for actuator 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available w/ Agency code C. 5 For other current ratings, consult factory. 6 On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder of rocker same color as bezel. 7 26-32A Polarity sensitive, only available as 1 pole unit. 8 Voltage code 4 available to 25A max.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
FIG.B
FIG. C
H-Series Flat Rocker Actuator – Ordering Scheme | 5
H 3 3
1 Series
2 Actuator
B 0
4 Circuit
3 Poles
10
5 Aux/Alarm Switch
6 Frequency & Delay
2 ACTUATOR1
7 8
Single Color Vertical Single Color Horizontal
3 POLE2 1
2
One
Push–to–Reset, Single Color Vertical Push–to–Reset, Single Color Horizontal
3
Two
4 CIRCUIT A B
Three
C4 Series Trip (voltage) G4 Relay Trip (voltage)
Switch Only (no coil) Series Trip (current)
5 AUXILIARY/ALARM SWITCH 0 w/o Aux Switch 13 0.110 Q.C. term 23 0.110 Solder Lug
33 0.110 Q.C. term w/ gold contacts 43 0.110 PC term
6 FREQUENCY & DELAY
30 31 32 34 36 424 444 464 524 544 564
033 10 11 12 14 16 20 21 22 24 26
DC 50/60Hz, Switch Only DC Instantaneous DC Ultra Short DC Short DC Medium DC Long 50/60Hz Instantaneous 50/60Hz Ultra Short 50/60Hz Short 50/60Hz Medium 50/60Hz Long
DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60Hz Short, Hi-Inrush 50/60Hz Medium, Hi-Inrush 50/60Hz Long, Hi-Inrush DC Short, Hi-Inrush DC Medium, Hi-Inrush DC Long, Hi-Inrush
7 CURRENT RATING (AMPERES) 5
CODE
AMPERES
410 1.000 450 5.000 512 1.250 455 5.500 415 1.500 460 6.000 517 1.750 465 6.500 420 2.000 470 7.000 522 2.250 475 7.500 425 2.500 480 8.000 527 2.750 485 8.500 430 3.000 490 9.000 435 3.500 495 9.500 440 4.000 610 10.000 445 4.500 710 10.500 VOLTAGE RATING CODE
A06 A12 A18 A24 A32 A48
RATING
6DC 12DC 18DC 24DC 32DC 48DC
1 B 1
8 Terminal
9 Actuator Color & Legend
10 Mounting Bezel/Barrier
8 TERMINAL
1 SERIES H 3 4
450
7 Current Rating
TRIP
5DC 10DC 15DC 20DC 25DC 40DC
VOLTS
A65 J06 J12 J18 J24 J48
611 711 612 712 613 614 615 616 617 618 619 620 65DC 6AC 12AC 18AC 24AC 48AC
11.000 11.500 12.000 12.500 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000
55DC 5AC 10AC 15AC 20AC 40AC
J65 K20 L40 B10 B20 X01
621 622 623 624 625 626 627 628 629 630 632
21.000 22.000 23.000 24.000 25.000 26.000 27.000 28.000 29.000 30.000 32.000
65AC 120AC 240AC 110DC 120DC 65AC
55AC 65AC 130AC 59DC 65DC special catalog #
1 2 3 A B
Push ON 0.250 Tab (Q.C.) Screw 8-32 w/upturned lugs Screw 8-32 (bus type) Screw M4 w/upturned lugs Screw M4 (bus type)
L R S T
D C
11 Rating
12 Agency Approval
Printed Circuitboard Terminals
90 Facing Left 90 Facing Right Straight Straight, Long
9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White A B Black C D Red F G Green H J Blue K L Yellow M N Gray P Q Orange R S
Dual Legend Color 1 Black 2 White 3 White 4 White 5 White 6 Black 7 Black 8 Black
10 MOUNTING/BARRIERS6 MOUNTING STYLE BARRIERS Threaded Insert 1 6-32 x 0.195 inches no A 6-32 x 0.195 inches yes 2 ISO M3 x 5mm no B ISO M3 x 5mm yes 3 6-32 x 0.195 inches no C 6-32 x 0.195 inches yes 3 ISO M3 x 5mm no D ISO M3 x 5mm yes 5 6-32 x 0.195 inches no E 6-32 x 0.195 inches yes 6 ISO M3 x 5mm no F ISO M3 x 5mm yes 7 6-32 x 0.195 inches no G 6-32 x 0.195 inches yes 8 ISO M3 x 5mm no H ISO M3 x 5mm yes 9 6-32 x 0.195 inches no J 6-32 x 0.195 inches yes P ISO M3 x 5mm no K ISO M3 x 5mm yes Q 6-32 x 0.195 inches no L 6-32 x 0.195 inches yes U ISO M3 x 5mm no M ISO M3 x 5mm yes
PUSH-TO- BRACKET RESET COLOR no Black no Black no Black no Black yes Black yes Black yes Black yes Black no White no White no White no White yes White yes White yes White yes White no Gray no Gray no Gray no Gray yes Gray yes Gray yes Gray yes Gray
11 MAX. APPLICATION RATING A 65DC D 250AC M 80DC 7 4 80VDC/250VAC8 12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted, CCC Certified E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified
Notes: 1 Push-To-Reset actuator shave OFF portion of rocker shrouded 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available w/ Agency code C. 5 For other current ratings, consult factory. 6 On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder of rocker same color as bezel. 7 26-32A Polarity sensitive, only available as 1 pole unit. 8 Voltage code 4 available to 25A max.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
FIG.B
FIG. C
6 | H-Series – Dimensional Specifications: in. [mm] – Handle Actuator
LINE
LOAD
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
H-Series – Dimensional Specifications: in. [mm] – Curved Rocker Actuator | 7
#6-32[M3] THREAD *0.138[3.50] DEEP #6-32[M3] THREAD *0.138[3.50] 2 PLCS PER POLE DEEP 2 PLCS PER POLE
1-POLE (HJ1)
1.382 [35.11]
1.130 [28.70] 1.130 [28.70]
1.414 [35.90] 1.414 [35.90]
0.357 [9.08]
0.650 [16.51] MAX 0.650 [16.51] MAX
LINE
0.118 [3.00]
1.726 [43.83] 1.726 [43.83]
1.382 [35.10] 1.382 [35.10]
0.126 [3.20] 0.126 [3.20]
0.346 [8.80] 0.118 0.346 [3.00] [8.80]
0.357 [9.08]
1.732 [44.00]
1.654 [42.00] 1.654 [42.00]
LOAD
SCREW TYPE TEMINALS IN SERIES TRIP CIRCUIT CONFIGURATION SHOWN. FOR OTHERS CONFIGURATIONS, SEE CIRCUIT AND TERMINAL DIAGRAMS.
2.354 1.732 [59.78] [44.00] TAB(Q.C.)TYPE 2.354 [59.78] 2.354 [59.78] TAB(Q.C.)TYPE SCREW TYPE 2.354 [59.78] SCREW TYPE
0.161 [4.08]
1.382 [35.11]
0.161 [4.08] 0.413 [10.50] 0.413 [10.50] 1.260 [32.01] 1.260 [32.01]
2-POLE (HJ2)
0.630 [16.00]
LINE
1.130 [28.70] 1.130 [28.70] OPTIONAL "ROCKER GUARD" OPTIONAL "ROCKER GUARD"
0.630 [16.00] 1.280 [32.51] MAX
LOAD
1.280 [32.51] MAX 1.197 [30.40] 1.197 [30.40]
LINE C
1.693 [43.01] 1.693 [43.01] 0.778 [19.75]
LOAD
0.778 [19.75]
2-Ø0.156 [Ø3.96]
0.118 [2.99]
2-Ø0.156 [Ø3.96]
0.118 [2.99]
1.382 [35.10] 1.382 [35.10]
LINE
ON
NC
1.929 [49.00] MAX 1.929 [49.00] MAX
0.630 [16.00] TYP 0.630 [16.00] TYP
ON
NC C
3-POLE (HJ3)
1.146 [29.12] 1.146 [29.12] 0.640 [16.27]
LOAD
0.640 [16.27]
POLE POLE POLE 1 2 3 MULTI-POLE IDENTIFICATION SCHEME AS VIEWED FROM TERMINAL END OF BREAKER.
PANEL CUTOUT DETAIL TOLERANCE +.005[+.12] UNLESS OTHERWISE SPECIFIED
NOTES: 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE +.020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
8 | H-Series – Dimensional Specifications: in. [mm] – Flat Rocker Actuator
PUSH-TO-RESET ACTUATOR #6-32[M3] THREAD *0.138[3.50] DEEP 2 PLCS PER POLE
1-POLE (H31)
0.126 [3.20]
0.126 [3.20] 0.126 [3.20] 0.126 [3.20]
1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 0.650 [16.51] MAX 0.650 [16.51] MAX 0.650 [16.51] MAX 0.650 [16.51] MAX
0.118 [3.00]
1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 0.359 [9.12] [43.83] [28.70] 0.357 [9.06] 0.359 [9.12] 0.357 0.359 [9.06] [9.12] 0.357 [9.06] 0.359 [9.12] 0.357 [9.06]
0.118 [3.00] 0.118 [3.00] 0.118 [3.00]
1.732 [44.00]
0.126 [3.20] 0.126 [3.20] 0.126 [3.20] 0.126 [3.20]
1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 0.650 [16.51]
MAX 0.650 [16.51] MAX 1.382 [35.11] 0.650 [16.51] MAX 1.382 [35.11] 0.650 [16.51] 1.382 [35.11]MAX
1.382 [35.11]
2-POLE (H72)
1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [9.12] [43.83]0.359 [28.70]
0.118 [3.00] 0.118 [3.00]
1.654 [42.00] 1.654 [42.00] 1.654 [42.00] 1.654 [42.00]
1.414 [35.90] 1.414 [35.90] 1.414 [35.90] 1.414 [35.90]
2.353 1.732[59.76] [44.00] TAB(Q.C.)TYPE 1.732[59.76] [44.00] 2.353 2.353 [59.76] TAB(Q.C.)TYPE 2.353 1.732[59.76] [44.00] SCREW TYPE TAB(Q.C.)TYPE 2.353 [59.76] 2.353 [59.76] SCREW TYPE 2.353 [59.76] TAB(Q.C.)TYPE SCREW TYPE 2.353 [59.76] SCREW TYPE
0.118 [3.00]
2-POLE (H71)
LINE
LOAD
SCREW TYPE TEMINALS IN SERIES TRIP CIRCUIT CONFIGURATION SHOWN. FOR OTHERS CONFIGURATIONS, SEE CIRCUIT AND TERMINAL DIAGRAMS.
LINE
0.118 [3.00]
LOAD
0.359 [9.12]
0.161 [4.08]0.359 [9.12] 0.161 [4.08]0.359 [9.12] 0.161 [4.08]
LINE
0.161 [4.08] 1.260 [32.01] 1.260 [32.01] 1.260 [32.01] 1.260 0.630 [16.00] [32.01]
1.280 [32.51] MAX 0.630 [16.00]
1.130 [28.70] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70]
1.280 [32.51] MAX 0.630 [16.00] 1.280 [32.51] MAX 0.630 [16.00] 1.280 [32.51] MAX
3-POLE (H73) 1.929 [49.00] MAX 1.929 [49.00] MAX 1.929 [49.00] MAX 1.929 [49.00] MAX
0.630 [16.00] TYP 0.630 [16.00] TYP 0.630 [16.00] TYP 0.630 [16.00] TYP
LOAD 1.197 [30.40] 1.197 [30.40] 1.197 [30.40] 1.197 1.693[30.40] [43.01] 1.693 [43.01] 1.693 [43.01] 1.693 [43.01] 0.778 [19.75] 0.778 [19.75] 0.778 [19.75] 2-Ø0.156 [Ø3.96] 0.778 [19.75] 2-Ø0.156 [Ø3.96] 2-Ø0.156 [Ø3.96] 2-Ø0.156 [Ø3.96]
LINE
LOAD 0.118 [2.99] 0.118 [2.99] 0.118 [2.99] 0.118 [2.99]
1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10]
1.146 [29.12] 1.146 [29.12] 1.146 [29.12] 1.146 [29.12] 0.640 [16.27] 0.640 [16.27] 0.640 [16.27] 0.640 [16.27]
MULTI-POLE IDENTIFICATION SCHEME AS VIEWED FROM TERMINAL END OF BREAKER.
PANEL CUTOUT DETAIL TOLERANCE +.005[+.12] UNLESS OTHERWISE SPECIFIED
NOTES: 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE +.020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
H-Series – Dimensional Specifications: in. [mm] – PC Teminals | 9
PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE R
PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE L
PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE S & T
NOTES: 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE +.020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
10 | H-Series – Dimensional Specifications: in. [mm] – PC Teminals
P.C. FOOT PRINT FOR TERMINAL CODE R
P.C. FOOT PRINT FOR TERMINAL CODE L
P.C. FOOT PRINT FOR TERMINAL CODE S & T
NOTES: 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE +.020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
H-Series – Dimensional Specifications: in. [mm] – Circuit & Terminal | 11
HANDLE POSITION VS. AUX SWITCH MODE STANDARD C/B CIRCUIT BREAKER MODE
HANDLE POSITION
OFF
AUX. SWITCH MODE
30°
OFF
NC NO
C
NC NO
C
NC NO
C
ON
30°
ON
30°
ELECTRICAL TRIP
OFF
0.381 [9.69] 0.047 [1.20]
TERMINAL DIMENSIONAL DETAIL & RATING 0.264 [6.70]
Ø0.067 [Ø1.71]
TAB (Q.C.)
0.264 [6.70]
0.264 [6.70]
0.250 [6.35]
0.559 [14.19]
0.354 [9.00]
0.354 [9.00]
UPTURN LUG
0.287 [7.29]
BUS
0.197 [5.00]
0.197 [5.00]
0.047 [1.20]
P.C. TERMINAL
P.C. TERMINAL
THREAD SIZE #6-32 & M3 MOUNTING HARDWARE #8-32 & M4 THREAD TERMINAL SCREW
LINE
1.693 [43.00]
LOAD
MAIN AUX. SWITCH*
SEE TABLE B
DEPTH BEHIND PANEL
TAB (Q.C.) SCREW TYPE
1.996 [50.70] 1.996 [50.70]
.110 TAB (Q.C.)
2.467 [62.67]
SOLDER TYPE
2.252 [57.19]
* AVAILABLE ON SERIES TRIP AND SWITCH ONLY CIRCUITS. WHEN CALLED FOR ON MULTI-POLE UNITS, ONLY ONE AUX. SWITCH IS NORMALLY SUPPLIED, AS SHOWN IN MULTI-POLE IDENTIFICATION SCHEME.
1.854 [47.10]
LINE
1.413 [35.90]
1.732 [44.00] REF
TORQUE 7-9 IN-LBS [0.8-1.0 NM] 12-15 IN-LBS [1.4-1.7 NM]
TABLE B TERMINAL DESCRIPTION
1.508 [38.30]
P.C. TERMINAL
STRAIGHT (LONG)
TABLE A TIGHTENING TORQUE SPECIFICATIONS
1.012 [25.70]
LOAD
0.315 [8.00]
STRAIGHT (SHORT)
1.197 [30.40]
1.413 [35.90]
0.031 [0.80]
0.047 [1.20]
0.197 [5.00]
0.315 [8.00]
90 FACING LEFT 90 FACING RIGHT
BARRIER FOR UL-RECOGNIZED MULTI-POLE BREAKERS
0.806 [20.48]
1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE ±.020 [.51] UNLESS OTHERWISE SPECIFIED.
0.120 [3.05]
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
12 | H-Series – Dimensional Specifications: in. [mm] – Circuit & Terminal
B,C
B,C
G
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
H-Series Time Delay Values | 13
PERCENT OF RATED CURRENT
NOTES: Delay Curves 11,12,14,16,21,22,24,26: Breakers to hold 100% and must trip at 125% of rated current and greater within the time limit shown in this curve. Delay Curves 10,20: Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve. All Curves: Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall-mount position. The minimum inrush pulse tolerance handling capability is 12 times the rated current. These values are based on a 60 Hz 1/2 cycle, 8.33 ms pulse.
Instantaneous
AC
DC
Ultrashort
Short
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
14 | H-Series Time Delay Values
AC
DC
High Inrush AC
High Inrush DC
Medium
Long
Short
Medium
Long
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
| 15
* Intentionally left blank
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email:
[email protected] • www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email:
[email protected] • www.carlingtech.com East Region Sales Office, CT •
[email protected] Midwest Region Sales Office, IL •
[email protected] West Region Sales Office, CA •
[email protected] Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Int + 852-2737-2277 • Fax: Int + 852-2736-9332 Email:
[email protected] Shenzhen, China •
[email protected] Shanghai, China •
[email protected] Pune, India •
[email protected] Kaohsiung, Taiwan •
[email protected] Yokohama, Japan •
[email protected] Europe/Middle East/Africa Headquarters
Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Int + 44 1392-364422 • Fax: Int + 44 1392-364477 Email:
[email protected] GmbH, Germany •
[email protected] SAS, France •
[email protected] REV_CB_H_02_2014