heater kit installation - Vicon Industries
HEATER KIT INSTALLATION S660V-P
SN663V-A
Follow these steps to install the S660-HAH heater. 1. Remove the PTZ Module to install a Heater board. 2. Check the Power cable.
3. Assemble the Heater board to two bosses (A) with screws. 4. Place the Heater in the slot (B). 5. Plug the Power connector to the socket of the Heater board. 6. Heater cable should be placed away from the Main board. 7. Assemble the PTZ Module. 8. 24 VAC is required to use for the camera power for stable operation with Heater kit.
* HEATER (IF APPLICABLE) Power Supply Power Consumption Heater ON Heater OFF
24 VAC 10 W at 59 F(15 C) at 77 F(25 C)
* POWER Use Certified / Listed Class 2 power source only.
Vicon Industries Inc. 631-952-2288 800-645-9116 www.vicon-security.com
50303893A
SN663V-A
Follow these steps to install the S660-HAH heater. 1. Remove the PTZ Module to install a Heater board. 2. Check the Power cable.
3. Assemble the Heater board to two bosses (A) with screws. 4. Place the Heater in the slot (B). 5. Plug the Power connector to the socket of the Heater board. 6. Heater cable should be placed away from the Main board. 7. Assemble the PTZ Module. 8. 24 VAC is required to use for the camera power for stable operation with Heater kit.
* HEATER (IF APPLICABLE) Power Supply Power Consumption Heater ON Heater OFF
24 VAC 10 W at 59 F(15 C) at 77 F(25 C)
* POWER Use Certified / Listed Class 2 power source only.
Vicon Industries Inc. 631-952-2288 800-645-9116 www.vicon-security.com
50303893A
