HEC Remote Control Teardown

HEC Remote Control Teardown

HEC Remote Control Teardown By the end of this guide you will be able to teardown the HEC remote control

Written By: Travis Go

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

HEC Remote Control Teardown

INTRODUCTION In this guide you will learn how to teardown the HEC remote control

TOOLS: 2.5 mm Flathead Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

HEC Remote Control Teardown

Step 1 — HEC Remote Control Teardown



Using a flat head screwdriver pry open the remote

Step 2



Detach the circuit board from the bottom half of the remote casing.



Be careful when removing the circuit board from the casing.

 Springs are attached to the remote casing © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

HEC Remote Control Teardown

Step 3 

Remove plastic molding attached to the top half of the remote casing



Remove the lid encasing the batteries

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 03:12:12 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4