HELLA LED Safety DayLights
How Do They Work?
Smart Controller Easy Fit Installation This smart controller is designed to simplify the installation of HELLA’s LED Safety DayLights™ range by eliminating the need to wire the lamp, or changeover relay to ignition terminal 15. The Safety DayLights™ Smart Controller can be wired directly to the positive terminal of the battery, which saves the difficult and often time consuming task of finding the ignition feed.
Safety DayLights™ are forward facing signal lamps that significantly enhance the visibility of your vehicle during daylight hours to prevent vehicle crashes by ‘accidental oversight’. HELLA Safety DayLights™ are a “never forget” safety enhancement. They automatically switch ON when the ignition is switched ON and automatically switch OFF when the headlamps are turned ON in order not to dazzle other road users at night.
HELLA AUSTRALIA PTY LTD 54-76 Southern Road, Mentone, Victoria 3194, Australia PO Box 89, Mentone, Victoria 3194, Australia Phone + 61 (3) 9581 9333 Fax + 61 (3) 9585 2654 Sales/Customer Services Phone 1 800 061 729 Fax + 61 (3) 9583 1838
www.hella.com.au HELLA-NEW ZEALAND LIMITED 81-83 Ben Lomond Crescent Pakuranga, Auckland, New Zealand PO Box 51-427, Auckland, 2140, New Zealand
Technology with Vision
Phone + 64 (0) 9 577 0000 Fax + 64 (0) 9 576 2476 Sales/Customer Services Phone + 64 (0) 9 577 0366 Fax + 64 (0) 9 576 8202
www.hella.co.nz
The smart controller monitors the voltage supply from the battery and will automatically switch the Safety DayLights™ on when the engine is started, and automatically switch them off when the headlamps are activated, or the engine is turned off.
Low Beam Headlamps
➔➔ One smart controller controls two lamps. ➔➔ Quick and easy installation.
Energy Efficiency
➔➔ Multivolt™, suitable for 12 and 24 volt systems.
HELLA LED Safety DayLights™ use less than 5 watts per pair, equating to 95% less energy than the Dipped Headlamps of your vehicle. Q: Why is a safer light using so much less energy?
LED SAFETY DAYLIGHTS™ - SMART CONTROLLER Version
P/Ns
Standard
3091
Advanced*
3090
A: LED Safety DayLights™ are designed to direct light at other road users and not onto the road in front of the vehicle as Dipped Beam Headlamps do. Q: Will this save me petrol compared to using my headlamps?
P/N 3091 *Advanced version with vibration monitor for installation in vehicles with fuel saving alternator.
30
A: Studies have shown that the average family car will save as much as 0.2 litres of petrol per 100km.
30 9 78
50
P/N 3090 DL1 85 86 DL2 31 30 30 86
87 87a
59
11
All dimensions in mm
HELLA LED Safety DayLights™
HELLA LED Safety DayLights Be Safe, Be Seen
Q: What about my headlamp bulbs?
™
A: Using highly effective Safety DayLights™ instead of your Dipped Beam Headlamps, will of course also extend the life of your valuable headlamp bulbs.
www.safetydaylights.com
Intense White LED Light
Low Beam Headlamps
Designed to light the road at night without causing glare to other road users.
HELLA LED Safety DayLights™
Designed to increase the visibility (conspicuity) of your vehicle during daylight hours. ™
Maximise Your Vehicle Visibility Why Install HELLA Safety DayLights™?
As drivers we have all experienced the ‘fright second’ of having almost overlooked a car, van or truck fast approaching our intersection. We have also witnessed the terrifying experience of having almost been overlooked by the driver of another vehicle. Fact is Drivers do make Mistakes. Research tells us that failure to see another road user in time (or at all) is a contributing factor in over 50% of all daytime accidents. For daytime intersection accidents this increases to as much as 80%.
LED SAFETY DAYLIGHTS™ - 30° MOUNT
LED SAFETY DAYLIGHTS™ - SURFACE MOUNT
A lens angle of 30° allows installation as close as possible to the corners of a modern motor vehicle. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
An ultra-low profile strip lamp designed to be surface mounted for easy installation on flat surfaces. Kit contains 2 lamps, changeover relay, mounting screws and caps.
Angle
Voltage
Kit P/Ns
30°
12V
5631BL
30°
24V
5631-24V
39
186 26
For more information on HELLA LED Safety DayLights™ visit
www.safetydaylights.com LED SAFETY DAYLIGHTS - EASY-FIT
LED SAFETY DAYLIGHTS™ - RECTANGULAR
™
Voltage
Lamp P/Ns Kit P/Ns
12V
1013
5636BL
24V
1013-24V
5636-24V
Mounted perpendicular to the vehicle axis
33
150
Kit P/Ns
9-33V
5617*
0.5m cable
9-33V
5617-OE
2.5m cable
Dipped beam headlamps are designed to effectively light up the road in front of the vehicle during darkness, whilst causing as little glare as possible to oncoming traffic. Safety DayLights™ on the other hand are designed to significantly enhance the conspicuity of your vehicle during daylight hours because precision optics direct all the light towards the other road users. Be safe, be seen with HELLA LED Safety DayLights . ™
LED SAFETY DAYLIGHTS™ - 15° MOUNT
LED SAFETY DAYLIGHTS™ - 83MM ROUND
A lens angle of 15° allows installation as close as possible to the corners of a modern motor vehicle. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
Lamps feature a traditional round lens that illuminates with a distinctive ring of white LEDs. Also available with direction Indicator for commercial transport applications.** Direction indicator optic appears clear until illuminated. Voltage
Lamp P/Ns
12V
1006
Voltage
Kit P/Ns
1007-24V*
15°
12V
24V
5630BL
2108-GMD**
15°
24V
12V
5630-24VBL
Angle
37
162 27
24V
41
1009
5619
24V
1009-24V
5619-24V
12V
1009V
5619V
24V
1009V-24V
5619V-24V
Mounted perpendicular to the vehicle axis
11
283
25
Voltage
Lamp P/Ns
12V
1008
24V
1008-24V
26 215 22 5 x ø4.2
A recess mounted strip lamp that illuminates with a narrow row of white LEDs. Kit contains 2 lamps, changeover relay, mounting screws and screw caps.
Mounted perpendicular to the vehicle axis
25.5
Ø74
Ø71
83
217 24
19
10 E24
Mounted perpendicular to the vehicle axis
18 39
39
39
39
LED SAFETY DAYLIGHTS™ - RECESS MOUNT
TOP
2108-GMD24**
* Safety DayLight™ and Front Position lamp. ** Safety DayLight™, Front Position lamp & Front Direction Indicator
12V
Vertical Mount P/N 1009V
19
42
Source: The Safety Effects of Daytime Running Lights, SWOV, 1997
Why can’t I just switch on my headlamps?
Kit P/Ns
46
150
* Includes super seal connectors and professional vehicle wiring harness.
27
Lamp P/Ns
A strip lamp that clips into a separate mounting bracket for easy installation inside vehicle grills.
Mounted perpendicular to the vehicle axis
Voltage
Voltage
Horizontal Mount P/N 1009
LED SAFETY DAYLIGHTS™ - COMPACT MOUNT
Rectangular shaped lamp with universal mounting brackets that allow easy fitment to a wide array of vehicles.
Forward facing signal lamps, designed to be mounted on vehicles with flat fronts, or on motorbikes. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
UV
RESISTANT
vision
minimum legal requirement of 800cd
HELLA LED Safety DayLights
5 YR WARRANTY
BY DESIGN
approx 200cd at driver’s sight of
Harsh UV
Warranty
FIT & FORGET
21 42.2 22 Ø6.3 (1/4" UNC)
Mounted perpendicular to the vehicle axis
Voltage
Lamp P/Ns
Kit P/Ns
237
12V
1005
5618
257
24V
1005-24V
5618-24V
20 2x ø 4.2 20 26
Smart Controller Easy Fit Installation This smart controller is designed to simplify the installation of HELLA’s LED Safety DayLights™ range by eliminating the need to wire the lamp, or changeover relay to ignition terminal 15. The Safety DayLights™ Smart Controller can be wired directly to the positive terminal of the battery, which saves the difficult and often time consuming task of finding the ignition feed.
Safety DayLights™ are forward facing signal lamps that significantly enhance the visibility of your vehicle during daylight hours to prevent vehicle crashes by ‘accidental oversight’. HELLA Safety DayLights™ are a “never forget” safety enhancement. They automatically switch ON when the ignition is switched ON and automatically switch OFF when the headlamps are turned ON in order not to dazzle other road users at night.
HELLA AUSTRALIA PTY LTD 54-76 Southern Road, Mentone, Victoria 3194, Australia PO Box 89, Mentone, Victoria 3194, Australia Phone + 61 (3) 9581 9333 Fax + 61 (3) 9585 2654 Sales/Customer Services Phone 1 800 061 729 Fax + 61 (3) 9583 1838
www.hella.com.au HELLA-NEW ZEALAND LIMITED 81-83 Ben Lomond Crescent Pakuranga, Auckland, New Zealand PO Box 51-427, Auckland, 2140, New Zealand
Technology with Vision
Phone + 64 (0) 9 577 0000 Fax + 64 (0) 9 576 2476 Sales/Customer Services Phone + 64 (0) 9 577 0366 Fax + 64 (0) 9 576 8202
www.hella.co.nz
The smart controller monitors the voltage supply from the battery and will automatically switch the Safety DayLights™ on when the engine is started, and automatically switch them off when the headlamps are activated, or the engine is turned off.
Low Beam Headlamps
➔➔ One smart controller controls two lamps. ➔➔ Quick and easy installation.
Energy Efficiency
➔➔ Multivolt™, suitable for 12 and 24 volt systems.
HELLA LED Safety DayLights™ use less than 5 watts per pair, equating to 95% less energy than the Dipped Headlamps of your vehicle. Q: Why is a safer light using so much less energy?
LED SAFETY DAYLIGHTS™ - SMART CONTROLLER Version
P/Ns
Standard
3091
Advanced*
3090
A: LED Safety DayLights™ are designed to direct light at other road users and not onto the road in front of the vehicle as Dipped Beam Headlamps do. Q: Will this save me petrol compared to using my headlamps?
P/N 3091 *Advanced version with vibration monitor for installation in vehicles with fuel saving alternator.
30
A: Studies have shown that the average family car will save as much as 0.2 litres of petrol per 100km.
30 9 78
50
P/N 3090 DL1 85 86 DL2 31 30 30 86
87 87a
59
11
All dimensions in mm
HELLA LED Safety DayLights™
HELLA LED Safety DayLights Be Safe, Be Seen
Q: What about my headlamp bulbs?
™
A: Using highly effective Safety DayLights™ instead of your Dipped Beam Headlamps, will of course also extend the life of your valuable headlamp bulbs.
www.safetydaylights.com
Intense White LED Light
Low Beam Headlamps
Designed to light the road at night without causing glare to other road users.
HELLA LED Safety DayLights™
Designed to increase the visibility (conspicuity) of your vehicle during daylight hours. ™
Maximise Your Vehicle Visibility Why Install HELLA Safety DayLights™?
As drivers we have all experienced the ‘fright second’ of having almost overlooked a car, van or truck fast approaching our intersection. We have also witnessed the terrifying experience of having almost been overlooked by the driver of another vehicle. Fact is Drivers do make Mistakes. Research tells us that failure to see another road user in time (or at all) is a contributing factor in over 50% of all daytime accidents. For daytime intersection accidents this increases to as much as 80%.
LED SAFETY DAYLIGHTS™ - 30° MOUNT
LED SAFETY DAYLIGHTS™ - SURFACE MOUNT
A lens angle of 30° allows installation as close as possible to the corners of a modern motor vehicle. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
An ultra-low profile strip lamp designed to be surface mounted for easy installation on flat surfaces. Kit contains 2 lamps, changeover relay, mounting screws and caps.
Angle
Voltage
Kit P/Ns
30°
12V
5631BL
30°
24V
5631-24V
39
186 26
For more information on HELLA LED Safety DayLights™ visit
www.safetydaylights.com LED SAFETY DAYLIGHTS - EASY-FIT
LED SAFETY DAYLIGHTS™ - RECTANGULAR
™
Voltage
Lamp P/Ns Kit P/Ns
12V
1013
5636BL
24V
1013-24V
5636-24V
Mounted perpendicular to the vehicle axis
33
150
Kit P/Ns
9-33V
5617*
0.5m cable
9-33V
5617-OE
2.5m cable
Dipped beam headlamps are designed to effectively light up the road in front of the vehicle during darkness, whilst causing as little glare as possible to oncoming traffic. Safety DayLights™ on the other hand are designed to significantly enhance the conspicuity of your vehicle during daylight hours because precision optics direct all the light towards the other road users. Be safe, be seen with HELLA LED Safety DayLights . ™
LED SAFETY DAYLIGHTS™ - 15° MOUNT
LED SAFETY DAYLIGHTS™ - 83MM ROUND
A lens angle of 15° allows installation as close as possible to the corners of a modern motor vehicle. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
Lamps feature a traditional round lens that illuminates with a distinctive ring of white LEDs. Also available with direction Indicator for commercial transport applications.** Direction indicator optic appears clear until illuminated. Voltage
Lamp P/Ns
12V
1006
Voltage
Kit P/Ns
1007-24V*
15°
12V
24V
5630BL
2108-GMD**
15°
24V
12V
5630-24VBL
Angle
37
162 27
24V
41
1009
5619
24V
1009-24V
5619-24V
12V
1009V
5619V
24V
1009V-24V
5619V-24V
Mounted perpendicular to the vehicle axis
11
283
25
Voltage
Lamp P/Ns
12V
1008
24V
1008-24V
26 215 22 5 x ø4.2
A recess mounted strip lamp that illuminates with a narrow row of white LEDs. Kit contains 2 lamps, changeover relay, mounting screws and screw caps.
Mounted perpendicular to the vehicle axis
25.5
Ø74
Ø71
83
217 24
19
10 E24
Mounted perpendicular to the vehicle axis
18 39
39
39
39
LED SAFETY DAYLIGHTS™ - RECESS MOUNT
TOP
2108-GMD24**
* Safety DayLight™ and Front Position lamp. ** Safety DayLight™, Front Position lamp & Front Direction Indicator
12V
Vertical Mount P/N 1009V
19
42
Source: The Safety Effects of Daytime Running Lights, SWOV, 1997
Why can’t I just switch on my headlamps?
Kit P/Ns
46
150
* Includes super seal connectors and professional vehicle wiring harness.
27
Lamp P/Ns
A strip lamp that clips into a separate mounting bracket for easy installation inside vehicle grills.
Mounted perpendicular to the vehicle axis
Voltage
Voltage
Horizontal Mount P/N 1009
LED SAFETY DAYLIGHTS™ - COMPACT MOUNT
Rectangular shaped lamp with universal mounting brackets that allow easy fitment to a wide array of vehicles.
Forward facing signal lamps, designed to be mounted on vehicles with flat fronts, or on motorbikes. Kit contains 2 lamps, mounting brackets, changeover relay and mounting screws.
UV
RESISTANT
vision
minimum legal requirement of 800cd
HELLA LED Safety DayLights
5 YR WARRANTY
BY DESIGN
approx 200cd at driver’s sight of
Harsh UV
Warranty
FIT & FORGET
21 42.2 22 Ø6.3 (1/4" UNC)
Mounted perpendicular to the vehicle axis
Voltage
Lamp P/Ns
Kit P/Ns
237
12V
1005
5618
257
24V
1005-24V
5618-24V
20 2x ø 4.2 20 26
