HIGH PRESSURE CLEANER
NON-FLAMMABLE NO STREAKING NO FUMING NO CLOGGING DANGER! Contains sodium metasilicate and 2Harmful if swallowed, in butoxyethanol. contact with skin or if inhaled. Causes severe skin burns and serious eye damage. May cause respiratory irritation. Harmful if swallowed. Do not PRECAUTIONARY STATEMENTS: breathe mist or vapors. Wash hands, face and any skin contacted thoroughly after handling. Do not eat or drink when using this product. Wear protective gloves, protective clothing, eye protection and face protection. Use only in a well-ventilated area. IF SWALLOWED: Immediately call a poison center or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN OR HAIR: Take off immediately all contaminated clothing. Wash skin and hair with plenty of soap and water. Call a poison center or physician if you feel unwell. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a poison center or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or a physician. Keep container tightly closed. Store locked up in a well-ventilated area. Dispose of in an approved waste disposal facility. KEEP OUT OF REACH OF CHILDREN!
CONCENTRATED LIQUID
HIGH PRESSURE CLEANER • Emulsifies
HMIS/NFPA Ratings: Health-2, Flammability-0, Reactivity-0. MADE IN USA.
Specially Formulated for Hard Water with Deep Cutting Wetting Agents MARC High Pressure Cleaner is a blend of special surfactants and wetting agents to give deep penetration that will readily solubilize dirt and grease. MARC High Pressure Cleaner also contains ingredients to offset hard water problems and eliminate salting out which is prevalent in many high pressure cleaners, and causes nozzle clogging.
DIRECTIONS
Biodegradable Detergents Low Sudsing Penetrates Emulsifies An Exclusive Formula of
HIGHWAY DEPARTMENTS STREET DEPARTMENTS GARAGES DISPOSAL SERVICES SCHOOL BUSSES IMPLEMENT DEALERS EQUIPMENT DEALERS SEWAGE PLANTS
M-71-HP
MARC High Pressure Cleaner should be diluted at a ratio of 1 quart to 50 gallons of water (1:200). For extremely dirty or greasy surfaces a stronger concentration may be used. MARC High Pressure Cleaner may also be used as a "soak" solution. Use 6 to 10 ounces per gallon of warm or hot water and let soak until encrusted and greasy materials loosen, and then rinse.
Net Contents: 5 Gallons
RM06-15
CONCENTRATED LIQUID
HIGH PRESSURE CLEANER • Emulsifies
HMIS/NFPA Ratings: Health-2, Flammability-0, Reactivity-0. MADE IN USA.
Specially Formulated for Hard Water with Deep Cutting Wetting Agents MARC High Pressure Cleaner is a blend of special surfactants and wetting agents to give deep penetration that will readily solubilize dirt and grease. MARC High Pressure Cleaner also contains ingredients to offset hard water problems and eliminate salting out which is prevalent in many high pressure cleaners, and causes nozzle clogging.
DIRECTIONS
Biodegradable Detergents Low Sudsing Penetrates Emulsifies An Exclusive Formula of
HIGHWAY DEPARTMENTS STREET DEPARTMENTS GARAGES DISPOSAL SERVICES SCHOOL BUSSES IMPLEMENT DEALERS EQUIPMENT DEALERS SEWAGE PLANTS
M-71-HP
MARC High Pressure Cleaner should be diluted at a ratio of 1 quart to 50 gallons of water (1:200). For extremely dirty or greasy surfaces a stronger concentration may be used. MARC High Pressure Cleaner may also be used as a "soak" solution. Use 6 to 10 ounces per gallon of warm or hot water and let soak until encrusted and greasy materials loosen, and then rinse.
Net Contents: 5 Gallons
RM06-15
