HMDX Jam Rubber Battery Cover Replacement
HMDX Jam Rubber Battery Cover Replacement
HMDX Jam Rubber Battery Cover Replacement How to replace the rubber cover which is attached to the bottom of the speaker.
Written By: Blake Rounds
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
HMDX Jam Rubber Battery Cover Replacement
INTRODUCTION This guide explains how to remove or replace the rubber base for the HMDX Jam.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
HMDX Jam Rubber Battery Cover Replacement
Step 1 — Rubber Base
Pry off the rubber cover at the bottom of the speaker by using the plastic opening tool.
Slowly peel the rubber cover off.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
HMDX Jam Rubber Battery Cover Replacement
Step 3
After completely removing the rubber cover, find a new cover and prepare both it and the device for attachment.
Carefully replace the old rubber with the new one, being mindful to line the cover up correctly with the outside edge of the device as well as the inner cover.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-09 08:08:27 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
HMDX Jam Rubber Battery Cover Replacement How to replace the rubber cover which is attached to the bottom of the speaker.
Written By: Blake Rounds
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
HMDX Jam Rubber Battery Cover Replacement
INTRODUCTION This guide explains how to remove or replace the rubber base for the HMDX Jam.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
HMDX Jam Rubber Battery Cover Replacement
Step 1 — Rubber Base
Pry off the rubber cover at the bottom of the speaker by using the plastic opening tool.
Slowly peel the rubber cover off.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
HMDX Jam Rubber Battery Cover Replacement
Step 3
After completely removing the rubber cover, find a new cover and prepare both it and the device for attachment.
Carefully replace the old rubber with the new one, being mindful to line the cover up correctly with the outside edge of the device as well as the inner cover.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-09 08:08:27 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
