How to clean the Shure SM58 Grille

How to clean the Shure SM58 Grille

How to clean the Shure SM58 Grille This guide shows you how to clean your microphone grille.

Written By: nat coll

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

How to clean the Shure SM58 Grille

INTRODUCTION The grille is the part of the microphone that you speak into. Keeping it clean ensures that your sound quality is at its best.

TOOLS: Cup (1) Soap (1) Water (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

How to clean the Shure SM58 Grille

Step 1 — Grille 

Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.

Step 2



Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

How to clean the Shure SM58 Grille

Step 3 — How to clean the Shure SM58 Grille 

Put two drops of dish soap into a cup.



Add water to cup until half full.



Place the grille in the solution of soap and water.



Let the grille soak for half an hour.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

How to clean the Shure SM58 Grille

Step 5 

Remove the grille from the cup and rinse with cold water.



Allow the grille to air dry.



Make sure the grille and the foam inside it are completely dry before placing it back on the microphone.

This document was last generated on 2017-06-19 09:55:14 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5