How to empty and clean Rival 16131 Toaster crumb tray
How to empty and clean Rival 16131 Toaster crumb tray
How to empty and clean Rival 16131 Toaster crumb tray This guide will walk you through opening and removing the crumb tray.
Written By: Grant Haug
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
How to empty and clean Rival 16131 Toaster crumb tray
TOOLS: 8" Needle Nose Plier (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
How to empty and clean Rival 16131 Toaster crumb tray
Step 1 — How to empty and clean Rival 16131 Toaster crumb tray
To open the crumb tray, pinch the lever in the photo.
If the lever does not keep the the crumb tray closed, stretch the lever so that to make sure the two horizontal pieces are aligned.
Step 2
Now that the tray is exposed, it is possible to clean the face here.
Try to not let water get into the toaster as this may damage the heating coil.
© iFixit — CC BY-NC-SA
www.iFixit.com
If the tray can not be cleaned simply by opening it, keep going through the guide to fully remove it.
Page 3 of 4
How to empty and clean Rival 16131 Toaster crumb tray
Step 3
To remove the tray, the metal hinges must be bent up.
While applying pressure to the bottom of the toaster, use pliers or tweezers to bend up the bracket. The pressure applied to the bottom of the toaster should be just enough to allow the bracket to swing up.
Remove the tray and clean.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 10:11:47 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
How to empty and clean Rival 16131 Toaster crumb tray This guide will walk you through opening and removing the crumb tray.
Written By: Grant Haug
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
How to empty and clean Rival 16131 Toaster crumb tray
TOOLS: 8" Needle Nose Plier (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
How to empty and clean Rival 16131 Toaster crumb tray
Step 1 — How to empty and clean Rival 16131 Toaster crumb tray
To open the crumb tray, pinch the lever in the photo.
If the lever does not keep the the crumb tray closed, stretch the lever so that to make sure the two horizontal pieces are aligned.
Step 2
Now that the tray is exposed, it is possible to clean the face here.
Try to not let water get into the toaster as this may damage the heating coil.
© iFixit — CC BY-NC-SA
www.iFixit.com
If the tray can not be cleaned simply by opening it, keep going through the guide to fully remove it.
Page 3 of 4
How to empty and clean Rival 16131 Toaster crumb tray
Step 3
To remove the tray, the metal hinges must be bent up.
While applying pressure to the bottom of the toaster, use pliers or tweezers to bend up the bracket. The pressure applied to the bottom of the toaster should be just enough to allow the bracket to swing up.
Remove the tray and clean.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 10:11:47 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
