How to Farberware FSTO100

How to Farberware FSTO100

How to Farberware FSTO100 If your power supply faulty, you will not be able to turn your toaster oven on when it is plugged into the wall. This guide will leads you to perform a basic fix to the power supply.

Written By: Tony Wang

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

How to Farberware FSTO100

INTRODUCTION Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.

TOOLS: 9/32" Crescent Wrench (1) Phillips #0 Screwdriver (1) Flathead 3/32" or 2.5 mm Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

How to Farberware FSTO100

Step 1 — How to Farberware FSTO100 

First, to remove the plastic bracket, turn toaster oven on its side.



Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

How to Farberware FSTO100

Step 3 

Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.



If the wire gets pulled out of the transformer, reinsert it.



Use a small flathead screwdriver to secure the screw that holds the wire in place.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-16 03:15:04 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4