How to Remove the Front Bumper from a Subaru WRX
How to Remove the Front Bumper from a Subaru WRX STI
Moddit How to Remove the Front Bumper from a Subaru WRX STI This write up shows the simple steps of removing the front bumper from a 2015 Subaru WRX STi
Written By: Bench Espiritu
© 2017
www.moddit.com
Page 1 of 6
How to Remove the Front Bumper from a Subaru WRX STI
INTRODUCTION This guide will help overview the removal of the front bumper from a 2015 Subaru WRX STi.
TOOLS: 10mm Socket (1) Flathead Screwdriver (1) Small Pick (1)
© 2017
www.moddit.com
Page 2 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 1 — How to Remove the Front Bumper from a Subaru WRX STI
The first step is to lift up the front end of the car with a jack and jack stands.
After the car is in the air, pop the hood and locate the top clips that need to be removed.
The clips circled will be the initial clips that will need to be removed with the flat head or small pick.
Step 2
Start with small clips on the intake scoop to free it from the bumper.
Then start removing the clips on the top with a small pick or screw driver. Be gentle as these clips like to break quite easily.
© 2017
www.moddit.com
Page 3 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 3
After the top clips are removed, it is time to attack the clips on the side of the bumper that is attached to the fender liner.
Removal of the wheels is not necessary but will increase the space to work with. Step 4
Then under the car, there are a series of clips that connect the bumper to the under tray. Pop those out as well with the small pick or screw driver.
© 2017
www.moddit.com
Page 4 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 5
The last set of fasteners are 10mm socket bolts. They're on the top of the bumper in the engine bay.
Remove the 6 bolts and the bumper will be ready for pulling.
Step 6
After the 6 bolts are removed, it is time to slightly tug on the bumper.
Starting from the sides of the bumper, carefully pull them out to free from the fender.
Then pull from the front, but not all the way as the lights are still connected.
© 2017
www.moddit.com
Page 5 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 7
Remove the plug for the lights.
Once the plug is removed, the bumper is ready to be pulled. The removal of the front bumper is a fundamental step to working on vehicle parts behind the bumper. This document was last generated on 2017-06-17 10:45:45 PM.
© 2017
www.moddit.com
Page 6 of 6
Moddit How to Remove the Front Bumper from a Subaru WRX STI This write up shows the simple steps of removing the front bumper from a 2015 Subaru WRX STi
Written By: Bench Espiritu
© 2017
www.moddit.com
Page 1 of 6
How to Remove the Front Bumper from a Subaru WRX STI
INTRODUCTION This guide will help overview the removal of the front bumper from a 2015 Subaru WRX STi.
TOOLS: 10mm Socket (1) Flathead Screwdriver (1) Small Pick (1)
© 2017
www.moddit.com
Page 2 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 1 — How to Remove the Front Bumper from a Subaru WRX STI
The first step is to lift up the front end of the car with a jack and jack stands.
After the car is in the air, pop the hood and locate the top clips that need to be removed.
The clips circled will be the initial clips that will need to be removed with the flat head or small pick.
Step 2
Start with small clips on the intake scoop to free it from the bumper.
Then start removing the clips on the top with a small pick or screw driver. Be gentle as these clips like to break quite easily.
© 2017
www.moddit.com
Page 3 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 3
After the top clips are removed, it is time to attack the clips on the side of the bumper that is attached to the fender liner.
Removal of the wheels is not necessary but will increase the space to work with. Step 4
Then under the car, there are a series of clips that connect the bumper to the under tray. Pop those out as well with the small pick or screw driver.
© 2017
www.moddit.com
Page 4 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 5
The last set of fasteners are 10mm socket bolts. They're on the top of the bumper in the engine bay.
Remove the 6 bolts and the bumper will be ready for pulling.
Step 6
After the 6 bolts are removed, it is time to slightly tug on the bumper.
Starting from the sides of the bumper, carefully pull them out to free from the fender.
Then pull from the front, but not all the way as the lights are still connected.
© 2017
www.moddit.com
Page 5 of 6
How to Remove the Front Bumper from a Subaru WRX STI
Step 7
Remove the plug for the lights.
Once the plug is removed, the bumper is ready to be pulled. The removal of the front bumper is a fundamental step to working on vehicle parts behind the bumper. This document was last generated on 2017-06-17 10:45:45 PM.
© 2017
www.moddit.com
Page 6 of 6
