How to repair fog machines
How to repair fog machines
How to repair fog machines This is a full guide on how to repair a fog machine in an easy way!
Written By: rjay
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
How to repair fog machines
INTRODUCTION Cheap foggers often get damaged because of a bad quality. In fact, most of the damages are easy to repair so just check out this guide. The fogger I repaired is called 'eurolite n-19', but it is also sold under other names.
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
How to repair fog machines
Step 1 — Fog Machine
Open the fog machine by removing the screws at the sides of the fogger.
Remove the housing of the fog machine.
Find out the problem:
Fogger doesn't heat up : fuse or heating element.
No output: pump
Detailed info on finding out what's wrong can be found at: tec-shack's fog machine repair guide
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
How to repair fog machines
Step 3
Get the repair parts: this can be very hard; it took me a month to get the right thing.
In my case, I just needed a new heat fuse.
...and some spade connectors.
The heat fuse sits under the bimetal. ( It can't be seen clearly in the pics)
That's it, almost.
You simply have to put everything back together.
My main intention for this repair guide was giving you an overview and taking the fear out of opening the fog machine.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 06:32:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
How to repair fog machines This is a full guide on how to repair a fog machine in an easy way!
Written By: rjay
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
How to repair fog machines
INTRODUCTION Cheap foggers often get damaged because of a bad quality. In fact, most of the damages are easy to repair so just check out this guide. The fogger I repaired is called 'eurolite n-19', but it is also sold under other names.
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
How to repair fog machines
Step 1 — Fog Machine
Open the fog machine by removing the screws at the sides of the fogger.
Remove the housing of the fog machine.
Find out the problem:
Fogger doesn't heat up : fuse or heating element.
No output: pump
Detailed info on finding out what's wrong can be found at: tec-shack's fog machine repair guide
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
How to repair fog machines
Step 3
Get the repair parts: this can be very hard; it took me a month to get the right thing.
In my case, I just needed a new heat fuse.
...and some spade connectors.
The heat fuse sits under the bimetal. ( It can't be seen clearly in the pics)
That's it, almost.
You simply have to put everything back together.
My main intention for this repair guide was giving you an overview and taking the fear out of opening the fog machine.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 06:32:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
