HP Compaq 6910p RAM Replacement - The-Eye.eu!

HP Compaq 6910p RAM Replacement

HP Compaq 6910p RAM Replacement This guide will show you how to replace the RAM on an HP Compaq 6910p.

Written By: Tyler Fricks

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

HP Compaq 6910p RAM Replacement

INTRODUCTION In this guide, we will illustrate how to remove and replace the RAM card of this device. Thumbs and a Phillips screw driver are required to replace this item.

TOOLS:

PARTS:

Phillips #1 Screwdriver (1)

PC2-5300 2 GB RAM Chip (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

HP Compaq 6910p RAM Replacement

Step 1 — RAM



Loosen the 1.5 cm Phillips #1 screw.



Lift up the cover.

Step 2



Locate the release latches marked in red.



Press down on the release latches simultaneously to release the RAM.



Remove the RAM.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

HP Compaq 6910p RAM Replacement This document was last generated on 2017-07-07 05:52:16 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4