HP Compaq NC6120 Cooling Fan Replacement

HP Compaq NC6120 Cooling Fan Replacement

HP Compaq NC6120 Cooling Fan Replacement Removing a malfunctioning cooling fan from within the laptop.

Written By: Mateo Cuellar

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

HP Compaq NC6120 Cooling Fan Replacement

INTRODUCTION If heating problems occur with the laptop, it may be essential that the fan be removed to be cleaned or replaced. This can be done easily after disassembling the laptop.

PARTS: Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

HP Compaq NC6120 Cooling Fan Replacement

Step 1 — Cooling Fan 

Locate cooling fan directly to the left of copper heat sink.

Step 2



Locate the black/grey/brown colored cord and carefully disconnect it from the motherboard.



Place cord off to the side so that it is out of the way.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

HP Compaq NC6120 Cooling Fan Replacement

Step 3



Locate and remove the two 7.0mm Phillips #1 screws on the top left and top right corners of the cooling fan.

Step 4



Remove the fan from its spot.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

HP Compaq NC6120 Cooling Fan Replacement This document was last generated on 2017-06-22 03:27:39 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5