HP Envy 23-d060qd TouchSmart Back Panel Replacement

HP Envy 23-d060qd TouchSmart Back Panel Replacement

HP Envy 23-d060qd TouchSmart Back Panel Replacement This guide will demonstrate how to properly remove the back panel on the HP Envy 23-d060qd TouchSmart. This guide is a prerequisite for all other guides.

Written By: Zachary Dicks

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

HP Envy 23-d060qd TouchSmart Back Panel Replacement

TOOLS: Phillips #2 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

HP Envy 23-d060qd TouchSmart Back Panel Replacement

Step 1 — Back Panel 

Use your hands to unclip the plastic snaps on the back panel of the device.



Remove the three 11.5mm PH2 screws from the back panel.

Step 2

 The screws will not fall out of the back panel, but they will unscrew to release the back panel.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

HP Envy 23-d060qd TouchSmart Back Panel Replacement

Step 3 

Now, take the back panel off by pulling at it gently with your hands.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-26 11:18:54 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4