HP Mini 311 Wireless Card Replacement

Report 1 Downloads 129 Views
HP Mini 311 Wireless Card Replacement

HP Mini 311 Wireless Card Replacement This installation guide will provide information on replacing the wireless card for an HP Mini 311.

Written By: Christian Santoyo

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

HP Mini 311 Wireless Card Replacement

INTRODUCTION If you are having problems with internet connection, you may want to replace your wireless network card on your HP Mini 311.

TOOLS: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

HP Mini 311 Wireless Card Replacement

Step 1 — Battery



Lay the laptop on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.

Step 2



Slide the battery away from the device to remove.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

HP Mini 311 Wireless Card Replacement

Step 3 — Memory Shield 

With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.

 The screws will remain in the shied.

Step 4



Lift the memory shield up and remove from the laptop.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

HP Mini 311 Wireless Card Replacement

Step 5 — Wireless Card



Begin by removing the red and blue wires from the wireless card.

 Gently remove to avoid damaging the ends of the wires. Step 6 

© iFixit — CC BY-NC-SA

www.iFixit.com

Remove the two Phillips 00 3.8mm screws attached to the wireless card.

Page 5 of 6

HP Mini 311 Wireless Card Replacement

Step 7



Lift up the unattached side of the wireless card and pull out to remove.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-02 11:32:57 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6