HP Pavilion Sleekbook 15-b142dx Screen Replacement
HP Pavilion Sleekbook 15-b142dx Screen Replacement
HP Pavilion Sleekbook 15-b142dx Screen Replacement Now that the screen is replaced, restart the laptop and test under normal operation.
Written By: Jonathan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
INTRODUCTION This guide demonstrates how to properly replace your HP Pavilion Sleekbook 15 Screen.
TOOLS: iFixit Opening Tools (1) Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 1 — Screen
Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen.
Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.
Step 2 — Screws
Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 3
Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.
Step 4
Remove the four 5.7 mm (bigger) screws located towards the corners of the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 5
The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord. After the plastic is removed, unplug the cord connected to the screen.
To reassemble the device, follow the instructions in the reverse order. This document was last generated on 2017-07-16 01:41:55 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement Now that the screen is replaced, restart the laptop and test under normal operation.
Written By: Jonathan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
INTRODUCTION This guide demonstrates how to properly replace your HP Pavilion Sleekbook 15 Screen.
TOOLS: iFixit Opening Tools (1) Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 1 — Screen
Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen.
Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.
Step 2 — Screws
Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 3
Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.
Step 4
Remove the four 5.7 mm (bigger) screws located towards the corners of the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
HP Pavilion Sleekbook 15-b142dx Screen Replacement
Step 5
The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord. After the plastic is removed, unplug the cord connected to the screen.
To reassemble the device, follow the instructions in the reverse order. This document was last generated on 2017-07-16 01:41:55 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
