HP Slate 8 Pro IO Board Replacement AWS
HP Slate 8 Pro IO Board Replacement
HP Slate 8 Pro IO Board Replacement The IO board is in charge of the auxiliary box, charger and HDMI. If you are having problems with any of these devices, you should consider replacing the IO board.
Written By: Claudia
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
HP Slate 8 Pro IO Board Replacement
INTRODUCTION This guide is designed to help you out with changing the IO board. The IO board is used for charging the device, connecting the headphones, and being able to connect to the HDMI cable. If none of these are working you should consider replacing the board itself.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
HP Slate 8 Pro IO Board Replacement
Step 1 — Remove back cover
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down
Remove the back cover.
Disconnect the battery cable from the system board
Step 2 — Disconnect battery cable
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
HP Slate 8 Pro IO Board Replacement
Step 3 — Remove ribbon cables
Pull the yellow ribbons
Disconnect the speaker cables from the I/O board
Step 4 — Disconnect speaker cables
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
HP Slate 8 Pro IO Board Replacement
Step 5 — Remove screws
Remove the two Phillips PM1.5×4.0 screws that secure the I/O board to the display panel assembly.
Remove the IO board carefully.
Step 6 — Remove the IO board
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 07:09:01 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
HP Slate 8 Pro IO Board Replacement The IO board is in charge of the auxiliary box, charger and HDMI. If you are having problems with any of these devices, you should consider replacing the IO board.
Written By: Claudia
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
HP Slate 8 Pro IO Board Replacement
INTRODUCTION This guide is designed to help you out with changing the IO board. The IO board is used for charging the device, connecting the headphones, and being able to connect to the HDMI cable. If none of these are working you should consider replacing the board itself.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
HP Slate 8 Pro IO Board Replacement
Step 1 — Remove back cover
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down
Remove the back cover.
Disconnect the battery cable from the system board
Step 2 — Disconnect battery cable
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
HP Slate 8 Pro IO Board Replacement
Step 3 — Remove ribbon cables
Pull the yellow ribbons
Disconnect the speaker cables from the I/O board
Step 4 — Disconnect speaker cables
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
HP Slate 8 Pro IO Board Replacement
Step 5 — Remove screws
Remove the two Phillips PM1.5×4.0 screws that secure the I/O board to the display panel assembly.
Remove the IO board carefully.
Step 6 — Remove the IO board
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 07:09:01 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
