HR3200C - Makita
HR3200C 32mm SDS Plus Rotary Hammer
850W
Forcible Drilling & Chipping with Ultra-Low Vibration
No Hammering while idling ensures the machine’s long life.
Torque Limiter protects motor from burnouts by stopping bit rotation when hitting reinforcing.
24 Angle Settings of Chisel Bit increases productivity.
SPECIFICATIONS: Capacity Concrete (With TCT bit) Steel Wood Continuous rating input No load speed Blows per minute Overall dimensions Net weight Power supply cord Carbon brush Joule Rating
32mm 13mm 32mm 850W 315 - 630 r/min 1,650 - 3,300 398 x 108 x 239mm 4.8kg 5m CB350 5.5 Joules
FEATURES: Double insulation, variable speed, constant speed, soft start, torque limiter, SDS plus drive & carry case
STANDARD EQUIPMENT: Depth gauge, side grip & grease vessel. (Tool does not come with bit).
Slide Chuck
!Push-in and Go
Electronic control features variable speed control by dial, constant speed control and Soft Start variable speed control LED Lamp Green indicates power on machine functioning correctly. Blinking Red indicates maintenance required.
Change Lever in protected position for reduced possibility of breakage even if the machine is carelessly set down.
Rubberized Soft Grip provides more control and comfort while minimizing operator fatigue.
Auto Cut-Out Carbon Brush protects commutator and indicates time for maintenance Longer Carbon Brush Life by employing large carbon brush.
850W
Forcible Drilling & Chipping with Ultra-Low Vibration
No Hammering while idling ensures the machine’s long life.
Torque Limiter protects motor from burnouts by stopping bit rotation when hitting reinforcing.
24 Angle Settings of Chisel Bit increases productivity.
SPECIFICATIONS: Capacity Concrete (With TCT bit) Steel Wood Continuous rating input No load speed Blows per minute Overall dimensions Net weight Power supply cord Carbon brush Joule Rating
32mm 13mm 32mm 850W 315 - 630 r/min 1,650 - 3,300 398 x 108 x 239mm 4.8kg 5m CB350 5.5 Joules
FEATURES: Double insulation, variable speed, constant speed, soft start, torque limiter, SDS plus drive & carry case
STANDARD EQUIPMENT: Depth gauge, side grip & grease vessel. (Tool does not come with bit).
Slide Chuck
!Push-in and Go
Electronic control features variable speed control by dial, constant speed control and Soft Start variable speed control LED Lamp Green indicates power on machine functioning correctly. Blinking Red indicates maintenance required.
Change Lever in protected position for reduced possibility of breakage even if the machine is carelessly set down.
Rubberized Soft Grip provides more control and comfort while minimizing operator fatigue.
Auto Cut-Out Carbon Brush protects commutator and indicates time for maintenance Longer Carbon Brush Life by employing large carbon brush.
