HS 885 HD - Liebherr
Technical data Hydraulic crawler crane With Casagrande hydromills FD60 and FD100
HS 885 HD
Concept and characteristics HS 885 HD with hydromill
Constant tension winches
Cable drum
Crowd winch
Cooling system
Powerful diesel engine
Filter system
Multi-function crane with optional free-fall winches: • Hydromill crane • Grab crane • Service crane Engine: • • • • •
Powerful diesel engine – 670 kW (898 hp). No additional power pack required for hydromill. Less investment. Less operational costs. Less maintenance costs.
Cooling system: • High cooling capacity. • Operation at ambient temperature of up to 45°C at full engine power. • Operation at ambient temperature of up to 50°C at 500 kW engine power.
2
HS 885 HD
Hydraulic system: • Maximum safety for hydraulic system through filtration of all hydraulic flows returning from hydromill. • Lower risk of contamination with mud. • Prevents downtime and expensive repairs.
Concept and characteristics HS 885 HD with hydromill
Long frame
Powerful chain drive
Cutting wheel configurations for different soil formations
Hydromill:
Hydromill drive system:
• Heavy construction of hydromill allows excellent penetration of difficult soils.
• Powerful chain drive provides high torque and speed for the cutting wheels.
• Long frame provides outstanding guidance and verticality.
• Chain tensioner works as shock absorber.
• Inclinometer with gyroscope to measure and indicate verticality and orientation. Verticality control via steering plates.
• Full-face excavation through chain drive increases production rate. • Chain drive allows cutting of panel joint. • Cutting wheel configurations for different soil formations available. • No gearbox required to power the cutting wheels. Quick exchange. Low maintenance costs.
HS 885 HD
3
Set-up hydromill
Steering plates
Frame
Sensor box (gyroscope, inclinometer)
Guides
Compensators with sensors Guide for joint
Mud pump
Chain Hydraulic motors
Wheel assembly
Chisel
Hydromill selection
Trench width
700
800
900
1000
1100
1200
1300
1400
1500
120
130
140
FD 60
mm
FD 100
Soil characteristics
60
70
80
90
100
110
Uniaxial compressive strength
FD 60 FD 100
4
HS 885 HD
MPa
Hydromill options FD 100
L
L
FD 60
B1
B
B1
B
FD 60 Trench length (B)
Trench width (B1)
FD 100 Length (L)
Weight
Trench length (B)
Trench width (B1)
Length (L)
Weight
mm
mm
mm
t
mm
mm
mm
t
3200*
700 - 1200
15400
33 - 37
3200*
800 - 1500
15400
38 - 45
Torque at wheel axle
Wheel speed
Suction pump
Torque at wheel axle
Wheel speed
Suction pump
kNm
rpm
m³/h
kNm
rpm
m³/h
2 x 67
0 - 30
450
2 x 99
0 - 27
450
Verticality control
Verticality control
X axis
Y axis
X axis
Y axis
Wheels and steering plates
Steering plates
Wheels and steering plates
Steering plates
*) Other trench widths upon request.
HS 885 HD
5
Configuration and excavation depth Hose Tension System HTS
Hose Drum System HDS
FD 60 Trench width Excavation depth
FD 60 Trench width Excavation depth
700 mm
70 m
700 mm
100 m
FD 100 Trench width Excavation depth
800 mm
70 m
800 mm
64 m
800 mm
100 m
800 mm
100 m
1000 mm
64 m
1000 mm
64 m
1000 mm
100 m
1000 mm
100 m
1200 mm
64 m
1200 mm
58 m
1200 mm
100 m
1200 mm
100 m
1500 mm
58 m
1500 mm
100 m
Excavation depth
6
FD 100 Trench width Excavation depth
Excavation depths Boom length Vertical extension
58 m
29 m
6m
64 m
32 m
6m
70 m
35 m
6m
HS 885 HD
Control system and data recording
Data evaluation - verticality
FD90 CASAGRANDE Data inizio Ora inizio
C20
(Contratto N° C20)
DIAFRAMMI CON LA BENNA A FRESA Parametri e traiettorie in perforazione
Data Fine Ora Fine
: 03/20/2010 : 16.00.37
Data evaluation - orientation
Larghezza benna : 1,20 m Lunghezza benna : 3,00 m Profondità max. : 77,92 m
: 03/20/2010 : 17.03.24
EXHAV 4.22/TG2TCT231IT
Pannello N° : P21R
Deviazione Y (cm)
Deviazione X (cm)
Velocità di avanzamento (m/h) (1/351)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
100
200
300
400 -8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
-4
0
4
8
-8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
-4
0
4
8
FORDRILL Start date : 16/04/2011 Begin time : 08:14:24
End date End time
LIBERTY
((Contract N# : LIBERTY)
CUTTING WHEELS DIAPHRAGM WALL Depth and deviation according to depth Width bucket Length bucket Bottom level
: 16/04/2011 : 09:23:40
: 3,94 ft : 10,33 ft : 116,53 ft EXHAV 4.23/TG2HAV473EN
Panel N# : LD1 D (1)
(1/200)
X (10 in)
Y (10 in)
Rot. (5 in)
0
0
0
0
Axis AD
A
D
Axis BC -0,1 in
5
0,0 in
+0,1 in
-0,3 d° -0,3 in
0,0
10
0,0 in
+0,2 in
+0,1 d° +0,1 in
,7 +0
15
-0,1 in
+0,3 in
-0,6 d° -0,7 in
,1 +1
20
-0,1 in
+0,4 in
-0,6 d° -0,7 in
,2 +1
25
-0,1 in
+0,5 in
-0,5 d° -0,6 in
,0 +1
30
-0,2 in
+0,4 in
-0,5 d° -0,6 in
,0 +1
35
-0,2 in
+0,2 in
-0,6 d° -0,7 in
,7 +0
40
-0,3 in
0,0 in
-0,6 d° -0,7 in
,3 +0
45
-0,4 in
-0,2 in
-0,6 d° -0,7 in
0,0
50
-0,4 in
-0,3 in
-0,1 d° -0,1 in
,2 +0
55
-0,5 in
-0,4 in
-0,4 d° -0,4 in
,3 +0
60
-0,5 in
-0,5 in
-0,7 d° -0,7 in
,1 +0
65
-0,6 in
-0,6 in
-0,5 d° -0,5 in
-0,6
70
-0,6 in
-0,7 in
+0,3 d° +0,4 in
-1,6
75
-0,6 in
-0,7 in
+0,9 d° +1,0 in
-2,4
80
-0,7 in
-0,7 in
+0,9 d° +1,0 in
-1,4
85
-0,7 in
-0,7 in
+0,5 d° +0,5 in
-1,1
90
-0,8 in
-0,7 in
+0,3 d° +0,4 in
-1,1
95
-0,8 in
-0,7 in
-0,1 d° -0,1 in
-0,7
100
-0,9 in
-0,7 in
+0,4 d° +0,4 in
-1,1
105
-0,9 in
-0,7 in
+0,5 d° +0,5 in
-1,3
110
-1,0 in
-0,7 in
+0,8 d° +0,8 in
-1,7
115
-1,0 in -1,0 in
-0,7 in -0,7 in
-0,3 d° -0,3 in
in
+0,1 in -0,2 in
,3 +0
+0,2 in
-0,1
+0,1 in
-0,2
+0,1 in
-0,2
+0,0 in
-0,1
0,0 in
-0,3
-0,2 in
-0,5
-0,3 in
-0,6
-0,3 in
-0,5
-0,3 in
-0,9
-0,3 in
-1,2
-0,6 in
-1,2
-1,0 in
-0,6
-1,3 in
,3 +0
-1,0 in
,0 +1
-0,9 in
-0,1
-0,9 in
-0,3
-0,8 in
-0,4
-1,0 in
-0,7
-1,1 in
-0,4
-1,4 in
-0,2
-1,0 in
,3 +0
in
-0,3 in in
-0,4 in in
-0,4 in in
-0,5 in in
-0,5 in in
-0,5 in in
-0,5 in in
-0,7 in in
-0,8 in in
-0,8 in in
-0,6 in in
-0,2 in in
0,0 in in
-0,5 in in
-0,6 in in
-0,7 in in
-0,8 in in
-0,7 in in
-0,7 in
-0,5
+0,1 in
in
in in -0,6 in
B
C
-0,9
in in in in in in in in in in in in in in in in in in in in in in in
-1,1 in
Rotation calibration
Editing originale
JEAN LUTZ S.A - Jurançon - France - www.jeanlutzsa.fr pagina1/1
...
JEAN LUTZ S.A - Jurançon - France - www.jeanlutzsa.fr page1/1
Verticality measurement and recording
Control panel hydromill
Monitor hydromill
Monitor crawler crane Control unit in operator's cab
HS 885 HD
7
HS 885 HD with Casagrande hydromill – 11244768 – 04/2013 Subject to change without notice.
Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria Tel.: +43 50809 41–473, Fax: +43 50809 41–499 [email protected], www.liebherr.com facebook.com/LiebherrConstruction
HS 885 HD
Concept and characteristics HS 885 HD with hydromill
Constant tension winches
Cable drum
Crowd winch
Cooling system
Powerful diesel engine
Filter system
Multi-function crane with optional free-fall winches: • Hydromill crane • Grab crane • Service crane Engine: • • • • •
Powerful diesel engine – 670 kW (898 hp). No additional power pack required for hydromill. Less investment. Less operational costs. Less maintenance costs.
Cooling system: • High cooling capacity. • Operation at ambient temperature of up to 45°C at full engine power. • Operation at ambient temperature of up to 50°C at 500 kW engine power.
2
HS 885 HD
Hydraulic system: • Maximum safety for hydraulic system through filtration of all hydraulic flows returning from hydromill. • Lower risk of contamination with mud. • Prevents downtime and expensive repairs.
Concept and characteristics HS 885 HD with hydromill
Long frame
Powerful chain drive
Cutting wheel configurations for different soil formations
Hydromill:
Hydromill drive system:
• Heavy construction of hydromill allows excellent penetration of difficult soils.
• Powerful chain drive provides high torque and speed for the cutting wheels.
• Long frame provides outstanding guidance and verticality.
• Chain tensioner works as shock absorber.
• Inclinometer with gyroscope to measure and indicate verticality and orientation. Verticality control via steering plates.
• Full-face excavation through chain drive increases production rate. • Chain drive allows cutting of panel joint. • Cutting wheel configurations for different soil formations available. • No gearbox required to power the cutting wheels. Quick exchange. Low maintenance costs.
HS 885 HD
3
Set-up hydromill
Steering plates
Frame
Sensor box (gyroscope, inclinometer)
Guides
Compensators with sensors Guide for joint
Mud pump
Chain Hydraulic motors
Wheel assembly
Chisel
Hydromill selection
Trench width
700
800
900
1000
1100
1200
1300
1400
1500
120
130
140
FD 60
mm
FD 100
Soil characteristics
60
70
80
90
100
110
Uniaxial compressive strength
FD 60 FD 100
4
HS 885 HD
MPa
Hydromill options FD 100
L
L
FD 60
B1
B
B1
B
FD 60 Trench length (B)
Trench width (B1)
FD 100 Length (L)
Weight
Trench length (B)
Trench width (B1)
Length (L)
Weight
mm
mm
mm
t
mm
mm
mm
t
3200*
700 - 1200
15400
33 - 37
3200*
800 - 1500
15400
38 - 45
Torque at wheel axle
Wheel speed
Suction pump
Torque at wheel axle
Wheel speed
Suction pump
kNm
rpm
m³/h
kNm
rpm
m³/h
2 x 67
0 - 30
450
2 x 99
0 - 27
450
Verticality control
Verticality control
X axis
Y axis
X axis
Y axis
Wheels and steering plates
Steering plates
Wheels and steering plates
Steering plates
*) Other trench widths upon request.
HS 885 HD
5
Configuration and excavation depth Hose Tension System HTS
Hose Drum System HDS
FD 60 Trench width Excavation depth
FD 60 Trench width Excavation depth
700 mm
70 m
700 mm
100 m
FD 100 Trench width Excavation depth
800 mm
70 m
800 mm
64 m
800 mm
100 m
800 mm
100 m
1000 mm
64 m
1000 mm
64 m
1000 mm
100 m
1000 mm
100 m
1200 mm
64 m
1200 mm
58 m
1200 mm
100 m
1200 mm
100 m
1500 mm
58 m
1500 mm
100 m
Excavation depth
6
FD 100 Trench width Excavation depth
Excavation depths Boom length Vertical extension
58 m
29 m
6m
64 m
32 m
6m
70 m
35 m
6m
HS 885 HD
Control system and data recording
Data evaluation - verticality
FD90 CASAGRANDE Data inizio Ora inizio
C20
(Contratto N° C20)
DIAFRAMMI CON LA BENNA A FRESA Parametri e traiettorie in perforazione
Data Fine Ora Fine
: 03/20/2010 : 16.00.37
Data evaluation - orientation
Larghezza benna : 1,20 m Lunghezza benna : 3,00 m Profondità max. : 77,92 m
: 03/20/2010 : 17.03.24
EXHAV 4.22/TG2TCT231IT
Pannello N° : P21R
Deviazione Y (cm)
Deviazione X (cm)
Velocità di avanzamento (m/h) (1/351)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
100
200
300
400 -8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
-4
0
4
8
-8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
-4
0
4
8
FORDRILL Start date : 16/04/2011 Begin time : 08:14:24
End date End time
LIBERTY
((Contract N# : LIBERTY)
CUTTING WHEELS DIAPHRAGM WALL Depth and deviation according to depth Width bucket Length bucket Bottom level
: 16/04/2011 : 09:23:40
: 3,94 ft : 10,33 ft : 116,53 ft EXHAV 4.23/TG2HAV473EN
Panel N# : LD1 D (1)
(1/200)
X (10 in)
Y (10 in)
Rot. (5 in)
0
0
0
0
Axis AD
A
D
Axis BC -0,1 in
5
0,0 in
+0,1 in
-0,3 d° -0,3 in
0,0
10
0,0 in
+0,2 in
+0,1 d° +0,1 in
,7 +0
15
-0,1 in
+0,3 in
-0,6 d° -0,7 in
,1 +1
20
-0,1 in
+0,4 in
-0,6 d° -0,7 in
,2 +1
25
-0,1 in
+0,5 in
-0,5 d° -0,6 in
,0 +1
30
-0,2 in
+0,4 in
-0,5 d° -0,6 in
,0 +1
35
-0,2 in
+0,2 in
-0,6 d° -0,7 in
,7 +0
40
-0,3 in
0,0 in
-0,6 d° -0,7 in
,3 +0
45
-0,4 in
-0,2 in
-0,6 d° -0,7 in
0,0
50
-0,4 in
-0,3 in
-0,1 d° -0,1 in
,2 +0
55
-0,5 in
-0,4 in
-0,4 d° -0,4 in
,3 +0
60
-0,5 in
-0,5 in
-0,7 d° -0,7 in
,1 +0
65
-0,6 in
-0,6 in
-0,5 d° -0,5 in
-0,6
70
-0,6 in
-0,7 in
+0,3 d° +0,4 in
-1,6
75
-0,6 in
-0,7 in
+0,9 d° +1,0 in
-2,4
80
-0,7 in
-0,7 in
+0,9 d° +1,0 in
-1,4
85
-0,7 in
-0,7 in
+0,5 d° +0,5 in
-1,1
90
-0,8 in
-0,7 in
+0,3 d° +0,4 in
-1,1
95
-0,8 in
-0,7 in
-0,1 d° -0,1 in
-0,7
100
-0,9 in
-0,7 in
+0,4 d° +0,4 in
-1,1
105
-0,9 in
-0,7 in
+0,5 d° +0,5 in
-1,3
110
-1,0 in
-0,7 in
+0,8 d° +0,8 in
-1,7
115
-1,0 in -1,0 in
-0,7 in -0,7 in
-0,3 d° -0,3 in
in
+0,1 in -0,2 in
,3 +0
+0,2 in
-0,1
+0,1 in
-0,2
+0,1 in
-0,2
+0,0 in
-0,1
0,0 in
-0,3
-0,2 in
-0,5
-0,3 in
-0,6
-0,3 in
-0,5
-0,3 in
-0,9
-0,3 in
-1,2
-0,6 in
-1,2
-1,0 in
-0,6
-1,3 in
,3 +0
-1,0 in
,0 +1
-0,9 in
-0,1
-0,9 in
-0,3
-0,8 in
-0,4
-1,0 in
-0,7
-1,1 in
-0,4
-1,4 in
-0,2
-1,0 in
,3 +0
in
-0,3 in in
-0,4 in in
-0,4 in in
-0,5 in in
-0,5 in in
-0,5 in in
-0,5 in in
-0,7 in in
-0,8 in in
-0,8 in in
-0,6 in in
-0,2 in in
0,0 in in
-0,5 in in
-0,6 in in
-0,7 in in
-0,8 in in
-0,7 in in
-0,7 in
-0,5
+0,1 in
in
in in -0,6 in
B
C
-0,9
in in in in in in in in in in in in in in in in in in in in in in in
-1,1 in
Rotation calibration
Editing originale
JEAN LUTZ S.A - Jurançon - France - www.jeanlutzsa.fr pagina1/1
...
JEAN LUTZ S.A - Jurançon - France - www.jeanlutzsa.fr page1/1
Verticality measurement and recording
Control panel hydromill
Monitor hydromill
Monitor crawler crane Control unit in operator's cab
HS 885 HD
7
HS 885 HD with Casagrande hydromill – 11244768 – 04/2013 Subject to change without notice.
Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria Tel.: +43 50809 41–473, Fax: +43 50809 41–499 [email protected], www.liebherr.com facebook.com/LiebherrConstruction
