HTS33 Series - Pump Express
HTS33 Series Cast Iron Submersible High Temperature Effluent Pumps
Applications: • Boiler Blow Down Kits • Condensate Pits • Hot Water Sumps The HTS33 Series Pump is a rugged, submersible, cast iron pump with a non-clog vortex impeller and solids handling capability to 3⁄4". Unit has 1⁄3 HP, 115 Volt, single-phase motor and 11⁄2" NPT vertical discharge. Available with high temperature float switch.
HTS33 - Cast Iron Submersible High Temperature Effluent Pump
Details Submersible 1/3 HP, 1550 RPM, Oil-filled, Built-in thermal overload protection with automatic reset. 115V, 1ø, 12A, 60 Hz HTS33M1 HTS33A1 Manual Tethered
Electrical Models Switch Type Maximum Liquid Temperature Operation
200°F (93°C)
194°F (90°C)
Automatic On: 13.5" (343 mm) Off: 4.5" (114 mm) 3/4" spherical solid 20' oil and water resistant 16-3 SJOOW-A/SJOW with integrally grounded three-prong plug
Solids Handling Power Cord
Materials of Construction Motor/Volute Housing Mechanical Seal
Cast Iron
30
CAPACITY LITERS PER MINUTE
0
50
100
200 8
25 PERFORMANCE @ 70˚F WATER TEMPERATURE
20 15
6
PERFORMANCE @ 194˚F WATER TEMPERATURE
10
4 2
5 0
10
30
20
40
CAPACITY GALLONS PER MINUTE
50
60
0
Dimensional Data
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts Cast Iron Stainless Steel
Impeller Exterior Hardware Lower Motor Housing O-Ring Bearings
150
TOTAL HEAD IN METERS
Pump/Motor Unit Motor
Performance Data
TOTAL HEAD IN FEET
Pump Characteristics
9.12
7.31
Buna-N 11/ 2" NPT
Lower ball, upper sleeve type, oil lubricated
4.50
11.57
9.38 4.56 1
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product and their specifications without notice.
– Your Authorized Local Distributor –
USA 740 East 9th Street, Ashland, Ohio 44805 Tel: 888-957-8677 Fax: 800-426-9446 © 2009 Hydromatic Ashland, Ohio. All Rights Reserved. ®
www.hydromatic.com
CANADA 269 Trillium Drive, Kitchener, Ontario, Canada N2G 4W5 Tel: 519-896-2163 Fax: 519-896-6337 Item # W-02-7790 07/09
Applications: • Boiler Blow Down Kits • Condensate Pits • Hot Water Sumps The HTS33 Series Pump is a rugged, submersible, cast iron pump with a non-clog vortex impeller and solids handling capability to 3⁄4". Unit has 1⁄3 HP, 115 Volt, single-phase motor and 11⁄2" NPT vertical discharge. Available with high temperature float switch.
HTS33 - Cast Iron Submersible High Temperature Effluent Pump
Details Submersible 1/3 HP, 1550 RPM, Oil-filled, Built-in thermal overload protection with automatic reset. 115V, 1ø, 12A, 60 Hz HTS33M1 HTS33A1 Manual Tethered
Electrical Models Switch Type Maximum Liquid Temperature Operation
200°F (93°C)
194°F (90°C)
Automatic On: 13.5" (343 mm) Off: 4.5" (114 mm) 3/4" spherical solid 20' oil and water resistant 16-3 SJOOW-A/SJOW with integrally grounded three-prong plug
Solids Handling Power Cord
Materials of Construction Motor/Volute Housing Mechanical Seal
Cast Iron
30
CAPACITY LITERS PER MINUTE
0
50
100
200 8
25 PERFORMANCE @ 70˚F WATER TEMPERATURE
20 15
6
PERFORMANCE @ 194˚F WATER TEMPERATURE
10
4 2
5 0
10
30
20
40
CAPACITY GALLONS PER MINUTE
50
60
0
Dimensional Data
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts Cast Iron Stainless Steel
Impeller Exterior Hardware Lower Motor Housing O-Ring Bearings
150
TOTAL HEAD IN METERS
Pump/Motor Unit Motor
Performance Data
TOTAL HEAD IN FEET
Pump Characteristics
9.12
7.31
Buna-N 11/ 2" NPT
Lower ball, upper sleeve type, oil lubricated
4.50
11.57
9.38 4.56 1
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch. Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate. On/Off level adjustable. We reserve the right to make revisions to our product and their specifications without notice.
– Your Authorized Local Distributor –
USA 740 East 9th Street, Ashland, Ohio 44805 Tel: 888-957-8677 Fax: 800-426-9446 © 2009 Hydromatic Ashland, Ohio. All Rights Reserved. ®
www.hydromatic.com
CANADA 269 Trillium Drive, Kitchener, Ontario, Canada N2G 4W5 Tel: 519-896-2163 Fax: 519-896-6337 Item # W-02-7790 07/09
