Huawei P8 Lite Camera Replacement
Huawei P8 Lite Camera Replacement
Huawei P8 Lite Camera Replacement A replacement guide for the front and rear facing cameras of the Huawei P8 Lite.
Written By: Brayden Mann
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Huawei P8 Lite Camera Replacement
INTRODUCTION In this guide, instructions will be laid out to guide the replacement of the Huawei P8 Lite's front and rear facing cameras.
TOOLS: SIM Card Eject Tool (1) Spudger (1) T5 Torx Screwdriver (1) Phillips #000 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Huawei P8 Lite Camera Replacement
Step 1 — Camera
Remove the SIM that is connected with the mother board.
Remove the back cover. It is not fastened with screws or adhesive so it can be removed with your finger nails, spudger or other gentle tools.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Huawei P8 Lite Camera Replacement
Step 3
Use screwdriver from 54 Bit Driver Kit in order to remove screws. Be sure to separate the screws to avoid confusion.
PH000 Bit
T5 Torx
Remove the connectors attached to the motherboard. See the highlighted areas in the photos.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Huawei P8 Lite Camera Replacement
Step 5
Remove the motherboard carefully.
Replace the motherboard. To replace the motherboard, do it in the reverse order as the teardown process.
With the motherboard removed, take the spudger tool and remove the front camera.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Huawei P8 Lite Camera Replacement
Step 7
Use the spudger to remove the rear camera. To replace, begin in reverse order.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 04:54:43 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Huawei P8 Lite Camera Replacement A replacement guide for the front and rear facing cameras of the Huawei P8 Lite.
Written By: Brayden Mann
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Huawei P8 Lite Camera Replacement
INTRODUCTION In this guide, instructions will be laid out to guide the replacement of the Huawei P8 Lite's front and rear facing cameras.
TOOLS: SIM Card Eject Tool (1) Spudger (1) T5 Torx Screwdriver (1) Phillips #000 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Huawei P8 Lite Camera Replacement
Step 1 — Camera
Remove the SIM that is connected with the mother board.
Remove the back cover. It is not fastened with screws or adhesive so it can be removed with your finger nails, spudger or other gentle tools.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Huawei P8 Lite Camera Replacement
Step 3
Use screwdriver from 54 Bit Driver Kit in order to remove screws. Be sure to separate the screws to avoid confusion.
PH000 Bit
T5 Torx
Remove the connectors attached to the motherboard. See the highlighted areas in the photos.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Huawei P8 Lite Camera Replacement
Step 5
Remove the motherboard carefully.
Replace the motherboard. To replace the motherboard, do it in the reverse order as the teardown process.
With the motherboard removed, take the spudger tool and remove the front camera.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Huawei P8 Lite Camera Replacement
Step 7
Use the spudger to remove the rear camera. To replace, begin in reverse order.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 04:54:43 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
