Huawei Phone p7 Back Cover Replacement

Huawei Phone p7 Back Cover Replacement

Huawei Phone p7 Back Cover Replacement Written By: Sophia

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Huawei Phone p7 Back Cover Replacement

TOOLS:

PARTS:

Heat Gun (1)

Huawei Ascend P7 back cover (1)

iFixit Opening Picks set of 6 (1) Suction Handle (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Huawei Phone p7 Back Cover Replacement

Step 1 — Back Cover 

Heat to melt the adhesive sticker under the back cover.



Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.



Attention: Be careful with the bottom side because there is the battery flex cable.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Huawei Phone p7 Back Cover Replacement

Step 3 

Remove the back cover.



And you can replace with the new back cover.

Step 4

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 10:01:42 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4