I N F R A N O R⢠P O L A R I S - 6
I NI N F RFARNAON R O R™ PP OO L ALRAI SR -I6S - 6
Job Name: Job Name:_____________________________________
TM
Fixture Type: Fixture Type: ___________________________________ Number: JobJob Number: ___________________________________ Distributor: Distributor: _____________________________________ Distributor P.O.: _________________________________ Distributor P.O.:
fFiI xXtT u dIiM mEeNnSsI iOoNnS s U rR eE D
SWIVEL
YOKE
EPA:EPA: 1.47 1.47 FIXTURE WEIGHT: FIXTURE WEIGHT: 25 25 LBS.LBS.
EPA: 1.47 EPA: 1.47 FIXTURE LBS. FIXTURE WEIGHT: WEIGHT: 2323LBS
10.07" 6.34"
16.12"
9.44"
16.12"
Job Name:
9.44"
14.75"
Fixture Type:
9.45" 6.34" 10.23”
Job Number:
Fits 2.00" pipe Distributor: (2.38" O.D.)
0.81" for 3/4" mounting bolt (supplied by others)
Distributor P.O. :
EXEC - SQ19 Spec Sheet Dimensions: 19" x 19" x 6.75" Arm: 2" x 4" x 8" Tie-Rod Spacing: 3" (9/16" dia. holes)
Remote ballast box box detaildetail (175W(250MH & 250Wonly) only) 5.60" ballast Remote
6.62"(10 - single)
EPA: 1.5 3.0 3.5 5.0
(28 - 2@180) (29 - 2@90) (39 - 3@90) (32 - 3@120) (49 - 4@90)
15.00" 14.50" (4) clearance holes for 3/8" anchors (supplied by others)
4.00"
ORDERING SEQUENCE HOUSING
STYLE/ SIZE
LAMP WATTAGE
REFLECTOR
VOLTAGE
BALLAST
15.75"
SHIELD OPTIONS
MOUNTING
GENERAL OPTIONS
HOUSING FINISH
EXI FINISH
(2) (4) (10) II N n Ff RrA aN nO oRr(3) PPOoLlAa - 6WW RrI iSs- 6(5) R(6)IrTiTtEtNe(7)nS PSEp(8) Ce IcFiI fCi(9) AcTat I OiNo Sn s
(1)
(if req'd)
(11)
2.00"
POLE SECTION
(12)
Housing REFLECTOR HOUSING REFLECTOR EXEC WM 120 SQ19 SG C 2H Powder 70PMH (ED17) The luminaire luminaire housing shall shall be one-piece die-cast208 aluminum integral cooling for heat VFThe luminaire The luminaire yoke shallmodule be of formed aluminum thick and 2.00” wide. Yoke or HS BK reflector (ED17) 100PMH The housing be 3H one-piece die-castwith aluminum with fins integral shall be of0.25” a high purity anodized 5H dissipation. The perimeter of the casting shall incorporate a channel designed to retain a silicone shall allow 10 32 HF 240 N BZ for infinite aiming positions within its aiming range. Yoke version shall be 150PMH (ED17)* cooling fins for heat dissipation. The perimeter of theassembly. casting The shall incorpopatterned specular aluminum in a and choice of forms to provide a wide O-ring gasket, providing a compression seal to the doorframe luminaire housing, equipped with a watertight connector 3’ of 16/3 STO-W cord. PRL 277 WH (ED28) 175PMH 2S rate a channel designed toberetain a silicone O-ring gasket, providing a PRP selection of constricted, rectangular, high-proportioned beam 347 AL including the wire entrance, shall completely sealed from the outside environment. 250PMH (ED28) 3S compression seal to the doorframe assembly. The luminaire patterns. All reflector units (spot to bespun aluminum) shall be backed by an QTZ 480 39 housing, 28 ELECTRICAL MODULE 5S Anodized including wire entrance, shall be completely sealed from the outside FLaluminum extrusion stability repeatability of distribution. LENS & the DOORFRAME 4L Luminaire shall be for cULus listed forand use in wet locations and manufactured from UL LBZ 4W glass, 0.188” thick, thermal and impact resistant. EXI The luminaire lens shall be clear tempered environment. recognized MBZelectrical components. Electrical assembly is easily accessible through the N 70HPS (ED23.5) Lens shall be set into a die-cast aluminum doorframe, gasketed and retained by four continuous reflector module. Each high power factor ballast is capable of starting temperatures DBZ 29 49 ELECTRICAL MODULE 100HPS (ED23.5) galvanized steel clips around the lens perimeter for uniform pressure and watertight seal. down to ABK -20°F (-28.9°C) and shall be CWA. The socket shall be a mogul-based LENS & DOORFRAME 150HPS (ED23.5) Luminaire shall be cULus listed for use in wet locations and manufactured porcelainAAL socket with a 4KV rating. thick, thermal and The luminaire lens250HPS shall(E18) be clear tempered glass, 0.188" from UL recognized electrical components. Electrical assembly is easily Doorframe shall be one-piece die-cast aluminum and secured to the housing with four #10 NS impact Lens stainless shall besteel setscrews. in to a The die-cast doorframe, through the reflector module. Each high power factor ballast is recesessdresistant. and self-retained exterioraluminum shall contain four cored holes for accessible *150PMH requires M102 lamp. LAMP gasketed and retained by four continuo us galvanized steel around the securing external shielding accessories. The inner perimeter of the doorclips casting shall incorporate capable of starting temperatures down the following lamps:to -20°F (-28.9°C) and shall be CWA. REFLECTOR S H I E L D O P T I O N S Luminaire shall accept seal.at two points, providing a The socket lens perimeter for uniform pressure watertight a cchannel, designed to compress the O-ringand gasket in the housing shall be a mogul-base d porcelain socket with a 4KV rating.ED17 50PMH, 70PMH, 100PMH, 150PMH SG Stone Guard 2S Type-II Seg 2H Type-II Hydro 1
3
1
4
1
2
1 1
5
1
1
6
1
1
3
1
“dual seal” to prevent the entrance of contaminants and moisture. 1 1
70HPS, 100HPS, 150HPS
B17
3H Type-III Hydro Type-III Seg HS House Side Doorframe shall be 3Sone-piece die-cast aluminum and secured toShield the 175PMH, 250PMH ED28 5H Type-V Hydro Type-V Seg LAMP To obtain housing four SWIVEL #105S recesessd and self -retained stainless steel the highest level of lighting quality, it is recommended to replace lamps HEAVYwith DUTY N screws. Not RequiredThe 4L Type-IV Long Seg Luminaire shall accept the following lamps: before reaching predicted lamp life per manufacturer’s and IES guidelines. It is also The swivelshall shall be a two-piece aluminum assembly, designed to mountshielding directly to a 2” exterior contain fourdie-cast cored holes for securing external 4W Type-IV Wide Seg 70PMH, 100PMH, 150PMH, 250PMH, ED17 recommended to group re-lamp to175PMH, maintain uniformity and performance. pipe tenon (2.38” Swivel shall incorporate twocasting access panels the side for wire of the door shall inincorporate a c-access accessories. The O.D.). innerperimeter 1 B17 to the splice compartment. Swivel shall mount to the luminaire housing G cULus E Ndesigned E recognized R A L Oto P Tcompress IO N S the FINIS H two Owith P T two I O N S 00H P S, 150H P S channel, O-ring gasket in the housing at 175PMH, 250PMH (remote)BALLAST BOX (250MH) ED20 diecast hubs for additional mounting support and locking capability to withstand the toughest of REMOTE MOUNTED HF Horizontal Slip Fitter Powder Anodized WM Wall Mount points, providing a “dual to prevent theaiming entrance of contaminants and 3.5" environmental conditions andseal” shall allow for infinite positions within its aiming range. Ballast shall be housed in aofcast housing with heat dissipating fins and To obtain the highest level ighting l aluminum quality, it is recommended to replace moisture. LBZ supplied Light Bronze BK Black with (2) watertight connectors. Ballast boxper shallmanufacturer’s have a cast aluminum cover 3" lamp life and IES lamps before reaching predicted MBZ Medium Bronze BZ Dark Bronze and is It secured (6) plated steel fasteners. shall to be maintain capable of mounting at a YOKE 5.5" guidelines. is alsowith recommended to groupBallast re-lamp uniformity DBZ Dark Bronze WH White HEAVY DUTY SWIVEL distance of 200 ft. (based on 10-gauge wire and 1% voltage drop). The cast aluminum The luminaire yoke shall be of formed aluminum 0.25” thick and 2.00” wide. Yoke shall allow for Black performance. AL Natural Aluminum alloy shall contain less than 2/10 of 1% copper for resistance to corrosion including The swivel shall be awithin two-piece aluminum assembly, designed to andABK infinite aiming positions its aimingdie-cast range. Yoke version shall be equipped with a watertight AAL Natural Aluminum PRL Photocell Receptacle marine applications. Luminaire connector and 3’ to of 16/3 STO-W cord. (2.38" O.D.). mount directly a 2" pipe tenon Swivel shall incorporateNS two Non-Standard Finish PRP Photocell Receptacle splice(consult factory)REMOTE MOUNTED BALLAST BOX (250MH) access panels in the side for wire access to the cULus recognized Pole Cap BallastFINISH shall be housed in a cast alumin um housing with heat dissipating fins compartment. Swivel shall mount to QTZ the Quartz luminaire housing with two dieVF Vertical Slip Fitter Restrike Finished parts in a multistage phosphate processing finished and supplied withare(2)washed watertight connectors. Ballast box system shall and have a cast cast hubs for additional mounting FLsu pport and locking capability to Fuse Luminaire with a polyester urethane powder coat paint. Standard colors are dark bronze, black, cover and is secured with (6) plated steel fasteners. Ba llast shall be EXI Extruded Arm Insert withstand the toughest of environmental conditions and shall allow for aluminum white, and natural aluminum. Contact factory for nonstandard colors. (flat sheet) capable of mounting at a distance of 200 ft. (based on 10-gauge wire and 1% infinite aiming positions within its aiming range. N Not Required voltage drop). The cast aluminum alloy shall contain less than 2/10 of 1% copper for resistance to corrosio n including marine applications. YOKE Millennium • Greenville, 29607 • 2.00" TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com The luminaire yoke shall 701 be701 of formed Blvd aluminum 0.25"SCthick and MILLENNIUM BOULEVARD GREENVILLE, SC 29607 TEL 864.678.1000 FAX 864.678.1417 wide. Yoke shall allow for infinite aiming positions within its aiming range. FINISH the right to change specifications without notice. In the interest of continuous product improvement, Sterner Lighting reserves Hubbell 2/09 www.sternerlighting.com Inc. ector and 3' of 16/3 Yoke version shall be equipped with a watertight conn Finished parts Lighting, are washed in a multistage phosphate processing system and STO-W cord. finished with a polyester urethane powder coat paint. Standard colors are dark bronze, black, white, and natural aluminum. Contact factory for non- 1 standard colors. 1
4
1
1
1
E.P.D.M. gasket
J-box or conduit by others
1/2" bolt
1/2" 14 NPT
(supplied w/ plugs)
Fits 2" O.D. pipe
(4) 3/8" anchors (by others) with 3/4" bolt projection.
(7.69"H x 5.62"W x 1.75"T)
5
(2.875" O.D. and 9.88"H) (mounts to 2.38" O.D. tenon or pipe)
thru bolt use optional (4) 5/16" - 18 SST socket head set screws
6
Notes: 1) 2) 3) 4) 5)
All reflectors (minus the 5H & 5S) are field rotatable without tools. '32' mounting (3@120) only available with round pole or modified pole top fitter. The 'SG' stone guard option is clear polycarbonate and attaches to the door via (2) extrusions. The 'HS' house side shield option is n/a with the '5H' or '5S' reflector. The 'QTZ' quartz restrike option will have a 2-minute delay, and is only available in150W with DCBAYONET. 6) If the color for the 'EXI' extruded arm insert is not specified, insert will be brushed aluminum.
SEQUENCE P oORDERING laris-6 ORDERING SEQUENCE ORDERING SEQUENCE
ORDERING ORDERING SEQUENCE S e q u2e n c e
ORDERING rderin Item O Sequence: 1 g ItemSequence: Sequence: 1 Item 1 Item Sequence: 1 Item Sequence: 1
ORDER ORDER ORDER NUMBER: ORDER ORDER NUMBER: NUMBER: NUMBER: NUMBER:
HOUSING HOUSING HOUSING HOUSING HOUSING HOUSING
PL6 PL6 PL6
PL6 PL6 PL6
1. HOUSING HOUSING 1.1.HOUSING HOUSING 1. HOUSING 1 1. .(PL6) H ousing
q
(PL6) (PL6) (PL6) (PL6) (PL6)
3 3 3 3 3
2 2 2 2
LAMP LAMP WATTAGE LAMP LLLA WATTAGE A M AM MPPP WATTAGE WATTAGE WATTAGE WATTAGE 70PMH
70PMH 100PMH 70PMH 70PMH 50PMH 100PMH 70PMH 150PMH 100PMH 100PMH 70PMH 150PMH 100PMH 175PMH 150PMH 150PMH 100PMH 175PMH1, 2, 7 150PMH 250PMH 175PMH 150PMH 175PMH 250PMH1, 1,2, 2,7 7 175PMH 250PMH 1,1,5,7 2, 175PMH 2, 77 250PMH 250PMH3 1,1,5,7 100HPS 250PMH 100HPS3 3 150HPS 100HPS 3 100HPS 150HPS333 3 100HPS 150HPS 3 70HPS 150HPS 150HPS 3 3
BEAM BEAM PATTERN BEAM BEAM PATTERN BEAM BEAM PATTERN PATTERN PATTERN PATTERN SP 2
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
VOLTAGE VOLTAGE VOLTAGE V V O A G VO OLLLTTTA AG GEEE
BALLAST BALLAST BALLAST BALLAST BALLAST BALLAST
MODEL MODEL STYLE MODEL MODEL STYLE MODEL MODEL STYLE STYLE STYLE STYLE SW
120 120
SP 2
C
C
7 7 7 7 7 MOUNTING MOUNTING OPTIONS MOUNTING MOUNTING OPTIONS MOUNTING MOUNTING OPTIONS PD OPTIONS OPTIONSBP OPTIONS
PD WM
SFBP
8 8 8 8 8
9 9 9 9 9
10 10 10 10 10
SHIELD SHIELD OPTIONS SHIELD SHIELD OPTIONS SHIELD SHIELD OPTIONS OPTIONS OPTIONS OPTIONS TS
GENERAL GENERAL OPTIONS GENERAL OPTIONS GENERAL GENERAL GENERAL OPTIONS OPTIONS OPTIONS OPTIONS FL
FINISH FINISH FINISH FINISH FINISH FINISH
TS
BK BK
FL
PD BP SW 4 2 4 4S SC BZ RN 208 TS FL BK SP 120 CC PD BP PD SW YK 22 1,7 WM SFPL 5 PD BP TS FL BK SP 120 SW DP SP 120 FL BK TS WB SW WM 4S2 SC4 74 BZ RN 208 SF TS FL BK SP 120 C SW YK4 4 EC PCL WH RM 240 WM 5 4S SC BZ RN 208 SF WM SF DP 444 7 YK WB 2 4 WM 5 4 ST SF 4S SC BZ RN 208 208 RN SC DP BZ 4S YK EC PCL7 RM 240 YK WB 44 55 4S SC BZWH RN 208 RW BD AL 277 DP YK EC PCL WH RM 240 WB DP WB STonly) (yoke (swivel only) 775 DP 2 EC PCL WH RM 240 WB RM 240 ST PCL WH 7 RW EC AL 277 ECBD6 PCL WH RM 3 240 SG N 347 ST (swivel only) (yoke only) HPN RW BD AL 277 ST ST only) (swivel (yoke only) RW BD AL 277 277 RW SG62 6 N 347 AL HPN323 BD RW (swivel only) (yoke BD AL 8 277 (swivel only)N (yoke (yoke only) only) HPM NS (swivel only) only) SG N 347 HPN N (swivel only) (yoke only) 662 2 333 1,3,7 SG N 347 HPN HPN 347 HPM N 6 NS8 8 SG N 347 SG HPN Ndoubles the fixture quantity 2 N unless otherwiseNS HPW HPM N 2 2 Notes: 1) '250MH' only available with remote ballast. 5) N 'DP' option automatically specified. 886 HPM N NS N N 8 HPM 480 HPW2221,7 NS NSspecified. HPM 'DP'not option automatically doubles the fixture quantity unless otherwise Notes:2)1)'250MH' '250MH'not only available with'HPM', remote'HPW', ballast.distributions. N availble in 'SP', 6)5)N 'SG' available withN 'EC'. HPW 2 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. Notes: 1) '250MH' only available with remote ballast. 1,7 HPW HPW 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. 1) '250MH' only available with remote ballast. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions. 6) 'SG' not available with 'EC'. 3) 'HPN' distribution only available in '100HPS' & '150HPS'. 7) 'PCL' option not available with '250MH' remote box version. 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. HPW 22 Notes: Notes: 1) '250MH' only available with remote ballast. 5 ‘PCL’ option not available with version unless otherwise specified. Notes:1) 1'250MH' 175PMH &only 250PMH use remote ballast box; 2ft max distance, for longer distances option 5) 'DP' automatically doubles theremote fixturebox quantity Notes: available with remote ballast. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions.
6) 'SG' not available with 'EC'. 6)7)Please 'SG' not available with 'EC'. 'PCL' not available with '250MH' remote box version. 8) supply metal color chip or supply RAL# any 'NS' finish. 6) 'SG' not available with 'EC'. 6option option Please supply chip to match or specify colorfor for anyversion. ‘NS’ non-standard finish 6) available with 'EC'. 7) 'SG' 'PCL' not not available with '250MH' remote box 7) 'PCL' option not available with '250MH' remote box version. Please supply metal chip or supply RAL# for any 'NS'‘HPM’, finish.and ‘HPW’ 7 175w PMH &color 250w PMH not available with ‘SP’, ‘HPN’, 7)8)Please 'PCL' option not available with '250MH' remote box version. 7) 'PCL' option not available with '250MH' remote 8) supply metal color chip or supply RAL# forbox anyversion. 'NS' finish. 8) Please supply metal color chip or supply RAL# for any 'NS' finish. reflector options 8) Please Please supply supply metal color chip chip or or supply supply RAL# RAL# for for any any 'NS' 'NS' finish. finish. 8) metal color
'HPN' distribution only available in'YK' '100HPS' & '150HPS'. 2) '250MH' not availble in 'SP', 'HPW', distributions. 4) is distribution only the'HPM', yoke version. 2)3)'SC' '250MH' notavailable availble inavailable 'SP', 'HPM', 'HPW', distributions. contact factory 3) 'HPN' onlywith in '100HPS' & '150HPS'. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions. 3) distribution only available in '100HPS' & '150HPS'. 4)'HPN' 'SC' is only available withunless the yoke 'YK' specified version. 3) 'HPN' only available in & 4) Standard shield finish is with black otherwise 3) 2 'SC' 'HPN' distribution only available in '100HPS' '100HPS' & '150HPS'. '150HPS'. is distribution only available the yoke 'YK' version. is available with 4) ‘HPN’ distribution only available HPS 'YK' 4) 3 'SC' 'SC' is only only available with the theinyoke yoke 'YK' version. version. 4) 'SC' is only available with the yoke 'YK' version. 4 ‘SC’ safety cable in only available with ‘yk’ yoke version
100HPS 150HPS 2 .3
L A M P WAT TA G E 2 . L A M P WAT TA G E
. IL A M P WAT TA G E O D IUM 2 L A M WAT G E H2A2 2.L..LL LDa AEm MpP P Wat WATtTA TA G E aSSg Oe DI IUUM M D E S O D HHA AAL II ID E ED17 B17 (70PMH) (100HPS) S O D II(100HPS) U H L D E S O D UM M H A L (70PMH) I(70PMH) DE E D 1 7 B 1 E D 1 7 B 1 77 (100HPS) ED17 B17 (100PMH) (150HPS) 3 E D 1 7 B 1 (70PMH) ED17 (100HPS) q (50PMH) q (70HPS) B17 E D 1 7 17 7 (70PMH) (100HPS) ED17 B17 (100PMH) ED17 (150HPS) B B17 (100PMH) (150HPS) ED17 (150PMH) 3 B17 (100PMH) (150HPS) ED17 q (70PMH) ED17 q (100HPS) B17 ED17 B17 (100PMH) (150HPS) ED17 (150PMH) ED17 (150PMH) * ED20 (175PMH) 250PMH' only 3 available with ED17 (* '175PMH& q (100PMH) (150PMH) q (150HPS) B17 (150PMH) * ED17 ED20 remote (175PMH)*ED17 (* '175PMH& 250PMH' only available with ballast.)250PMH' ED20 (175PMH) (* '175PMH& only available with * ED28 (250PMH) ED20 (175PMH) * (* '175PMH& 250PMH' available with ballast.) q (150PMH) (*remote '175PMH& 250PMH' only onlyavailable availablewith with *ED17 ED20 (175PMH) only available with (* '175PMH& 250PMH' not remote ballast.) * ED28 (250PMH) ‘175PMH& 250PMH’ only available with ballast.) * ED28 (*remote (250PMH) remote ballast.) (* '175PMH& 250PMH' not available with 'SP', 'HPM', 'HPW', 'BI', & options.) ED28 remote (250PMH) **ED28 ballast.) q (175PMH)* (* '175PMH& 250PMH' not'PCL' available with ED28 (250PMH) (* '175PMH& 250PMH' not available with 'SP', 'HPM', 'HPW', 'BI', & 'PCL' options.) (* '175PMH& 250PMH' not available with (*'SP', ‘175PMH& 250PMH’ with 'HPM', 'HPW', 'BI',not & available 'PCL' options.) 'SP', 'HPM', 'HPW', 'BI', 'PCL' options.) q (250PMH)* ED28 ‘SP’, 'SP',‘HPM’, 'HPM',‘HPW’, 'HPW',‘BI’, 'BI',&& &‘PCL’ 'PCL'options.) options.) 'SP', 'HPM', 'HPW', 'BI', & 'PCL' options.)
3 . B E A M PAT T E R N 3 . BBEEAAM M PAT PATTTEERRN N 3 3(....SPB B A M PAT T R N )* E 33 ea Pat t E Am M (RN) PAT TeE Er Rn N (RM) ( S P ) * (RN) (RM) ((S P))** (RN) (RM) (RN) (RM) q (SP)* q (RN) (S SP P)* (RN) (RM) q (RM) (HPN)** (HPN)**
(HPM)* (HPM)*
(HPN)** ((H PM )* (HPN)** q (HPM)** q (HPN)** (H HP PM M))**
(RW) (RW)
((R W)) q (RW) (R RW W)
(HPW)* (HPW)*
((H PW )* q (HPW)** (H HP PW W))**
(* 'SP', 'HPM', 'HPW', not available in '250MH'. ) (* 'HPN' 'SP', 'HPM', 'HPW', in not'HPS'.) available in '250MH'. ) (** only available (* 'SP', 'HPM', 'HPW', not available in '250MH'. ) 'HPN' only'HPW', available inavailable 'HPS'.) inin (* 'SP', 'HPM', not '250MH'. (SP=spot , R=rectangular,HP=high-point, (*(** 'SP', 'HPM', 'HPW', not available inN=narrow, '250MH'.))))M=medium, W=wide.) (* ‘SP’, ‘HPM’, not ‘250MH’. (* 'SP', 'HPM', 'HPW', not available in '250MH'. (** 'HPN' only ‘HPW’, available in available 'HPS'.) (SP=spot ,only R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (** 'HPN' only available in 'HPS'.) (** 'HPN' only available in in 'HPS'.) 'HPS'.) (** ‘HPN’ available ‘HPS’.) (** 'HPN' (SP=spot , R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (SP=spot , R=rectangular,HP=high-point, N=narrow, (SP=spot , R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (SP=spot R=rectangular,HP=high-point,N=narrow, N=narrow,M=medium, M=medium,W=wide.) W=wide.) (SP=spot ,, R=rectangular,HP=high-point, M=medium, W=wide.)
6. MODEL STYLE 5. BALLAST 4 . V O LTA G E 6. . M M OD D ELL SSTTYYLLEE 5. . BBAALLLLAASSTT 4. . VVO OLTA LTAG GEE 6 5 6 M O D E L 5 .. (C)* B L S 4.(120) .. VV O LTA BA aCore lL l&A aCoil sT t 44 a gG MO o dE eL l S tY y10.07" lE e Swivel (YK) Yoke 4 Vo Olt LTA GeE E 6 ..(SW) M O D E L ST T Y L E 5 B A L L A S T 9.45" (SW) Swivel Swivel (YK) Yoke Yoke (120) (C)*Core Core&&Coil Coil 16.12" 16.12" (SW) (YK) (120) (C)* 6.34"10.07" 6.34"9.45" 16.12" (SW) Swivel (YK) Yoke (120) (C)* Core & Coil 16.12" 10.07" q (120) q (C)* Core & Coil (208) q (SW) Swivel q (YK) 9.45" 6.34" 16.12" (C)* Core & Coil (SW) Swivel (YK)Yoke Yoke (120) 16.12" 10.07" 6.34" 10.07" 9.45" 6.34" 16.12" 16.12" 9.45" 10.07" (208) 6.34" 16.12" 16.12" 9.45" 6.34" 16.12" (208) 6.34" 6.34" 6.34" 9.44" 6.34" (208) q (208) (240) 9.44" (208) 10.23" 9.44" 14.75" (240) 9.44" 9.44" 10.23" (240) 9.44" 9.44" 10.23" q (240) 9.44" 14.75" (240) 9.44" 10.23" 14.75" (277) 9.44" (240) 10.23" (* Core & coil ballast is high-power factor 14.75" 14.75" (277) 14.75" Fits 2.00" pipe 0.81" for 3/4" mounting (* Core & coil ballast is high-power factor (277) q (277) and rated (-28.9°C).) (* Core & for coil-20°F ballast is high-power factor (2.38 O.D.)pipe (277) Fits 2.00" 0.81" boltfor by3/4" othersmounting 2.00" (347) (*and Core & coil ballast is high-power factor (277) rated forballast -20°F is (-28.9°C).) Fits (2.38 2.00" O.D.) pipe 0.81" for 3/4" mounting Core & coil coil ballast ishigh-power high-powerfactor factor (* Core & Core & coil ballast is high-power factor bolt3/4" by others and rated for -20°F (-28.9°C).) Fits 2.00" pipe 0.81" for mounting 2.00" (347) Fits 2.00" pipe (2.38 O.D.) for 3/4" and rated for -20°F (-28.9°C).) Fits 2.00" pipe q (347) (*’250MH’ remote ballast box.) (347) EPA: 1.47 WT:O.D.) 25 LBS. EP0.81" A: bolt 1by .4others 7mounting WT: 23 LB2.00" S. rated for foruses -20°F (-28.9°C).) and -20°F (-28.9°C).) (2.38 and rated rated for -20°F (-28.9°C).) bolt by others 2.00" (347) bolt by others (2.38 O.D.) 2.00" (*’250MH’ uses remote ballast box.) EPA: 1.47 WT: 25 LBS. EPAbolt : by1others .47 WT: 23 L2.00" BS. (347) (*’250MH’ uses remote ballast box.) EPA: 1.47 WT: 25 LBS. EPA: 1.47 WT: 23 LBS. q (480) (*’250MH’ uses remote ballast box.) E W E W (*’250MH’ uses uses remote remoteballast ballastbox.) box.) (*’250MH’ EP PA A::: 1 1...4 47 7 WTTT::: 2 25 5 LLLB BS S... EP PA A:: 1 1..4 47 7 WTTT::: 2 23 3 LLLB BS S... (*’250MH’ E P A 1 4 7 W 2 5 B S W 2 3 B S 7. SWIVEL MoUN T I Nuses Gremote Oballast P T box.) I O N S (’DP’ option automatically doubles the fixture quantity unless otherwise specified.) EPA: 1.47 7. . SSW WIIVVEELL M Mo oUUN NTTIIN NG GO OPPTTIIO ON NSS (’DP’ (’DP’ option automatically doubles the fixture quantity unless otherwise specified.) 7 option automatically doubles the fixture quantity unless otherwise specified.) 77 . .. SS gG p(ST) tT io nN sS option automatically doubles the fixture quantity unlessunless otherwise specified.) 7 Sw WiIIvPad VeE ElL LM Moo ouU UnN NtT Ti n N GOO O P T O N S(’DP’(’DP’ (’DP’ option automatically doubles the fixture quantity otherwise specified.) (’DP’ option automatically doubles the fixture fixture quantity unless otherwise specified.) W V M II N P II O option automatically doubles the quantity unless otherwise specified.) Post-Top Mount (DP) Dual Base Stanchion (PD) (N) Wall Mount (WM) DualPost-Top Post-TopMount Mount (DP) Dual BasePad Pad Stanchion (PD) Base (ST)Mount (N)Required WallMount Mount (WM)supplied (2.00” sch. 40 q (ST) Stanchion (Anchors supplied by others.) 2.38” (Anchors by others.) (DP) Stanchion (PD) (ST) (N) Wall Not (WM) q (PD) Base Pad q (DP) Dual Post-Top Mount q (WM) Wall Mount steel pipe) Wall Mount (WM) (2.00” sch. 40 q (N) Mount (AnchorsBase supplied by others.) O.D. Dual Post-Top Mount (DP) Base Pad Stanchion (PD) (ST) (N) 2.38” (Anchors supplied by others.) Dual Post-Top Mount (DP) Pad Stanchion (PD) (ST) Not Required 0.56 (N) Wall Mount (WM) (2.00” 40 Mount Mount 2.06 (Anchors supplied by others.) 2.38” 2.00” IPS (Anchors supplied bytenon others.) steelsch.pipe) 2.00” IPS tenon Mount
O.D. (2.00” sch. 40 40 (Anchors supplied by(4) others.) 2.38” (2.00” sch. 0.56 steel pipe) 2.38” (2.00” sch. 40 I.D. O.D. by 2.06(Anchors supplied by 2.38” 0.56others.) steel pipe) pipe) O.D. steel 2.06I.D. (4) O.D. steel pipe) 0.56 O.D. 0.56 2.06 (4) 0.56 2.06 I.D. 2.06 (4) (4) dia I.D. (4) 6.00” I.D. bolt6.00” circledia 6.25” 6.00” bolt dia circle 6.25” 6.00” dia 0.25” 6.00” 6.00” dia bolt circle 6.00” dia 6.25” bolt 6.25” 0.25” 6.00” bolt circle circle 6.25” 6.25” bolt circle 0.25” 6.00” 0.25” 6.00” 0.25” 6.00” 6.00” All components steel 0.25” welded construction All components steel Allwelded components steel construction All components steel All components steel welded construction All components steel welded construction welded construction construction welded
Mount 2.00” IPS tenon 2.00” IPS tenon 2.00” IPS IPS tenon tenon 4.50” 2.00” 4.50” 4.50” 4.50” 4.50” 4.50” 4.50” 4.50” All components4.50” steel 4.50” 4.50” 4.50” welded construction All components steel All components steel (For concrete pour) welded construction All components steel All components steel welded construction All components steel (For concrete pour) welded construction (For concrete pour) welded construction (For concrete pour) (For (For concrete concrete pour) pour)
21.75” 21.75” 21.75” 21.75” 21.75” 21.75”
((ABnP ch)orsBsa upspeliePdla btyeothers0.56” .)
5/8" pivot bolt pivot 5/8" 3/4" mounting 5/8" pivot bolt hardware pivot 3/4" mounting 5/8" 5/8" pivot pivot 3/4" hardware mounting 5/8"bolt bolt bolt 3/4" mounting bolt 3/4" mounting hardware 3/4" mounting hardware hardware hardware
1.50” 1.50” 1.50” 1.50” 1.50” 1.50” Cast ductile iron wallCast bracket ductileand iron Cast ironand horizontal sector wallductile bracket Cast ductile iron wall bracket and Cast ductile iron horizontal sector wall bracket and wall bracket and horizontal sector wall bracket and horizontal horizontal sector sector horizontal sector
3.00” 1.38” 3.00” 3.00” 1.38” 3.00” 3.00” 1.38” 3.00” 0.38” 1.38” 1.38” Cast ductile iron 0.38” 1.38” surface baseiron 0.38” Cast ductile Castsurface ductile base iron 0.38” 0.38” Cast ductile iron Cast ductile iron surface base Cast ductile iron 0.38” surface surface base base surface base
8.00” 5.50” 8.00” 8.00” 5.50” 8.00” 8.00” 5.50” 5.50” 5.50” 5.50”
(Standard shield finish is black unless otherwise specified.) S Hi IeEl L DOOpP IO N 88 .8.. S d tPT iTo n sNS . Sh (Standard shield finish is black unless otherwise specified.) SH HIIEEL LD DO OP ON S (Standard 8 shield finish is black unless otherwise specified.) T IIIO S 8 . (Standard S H I E L D is O P T unless O otherwise N S specified.) (Standard shield finish black unless specified.) 8 . Top (Standard shield SH I E L D O PqT(EC) Egg shield finish is black black unless ION otherwiseq specified.) Shield EggS Crate FourSided Sidedotherwise (TS) (EC) (4S)is q (TS) Top Shield Crate q finish (4S) Four (BD) BarnDoor Door (BD)Barn
TopShield Shield4.25" (TS)15.79" Top (TS) Top (TS) 4.25" 15.79" Top Shield Shield 4.25" (TS) 15.79" 15.79" 8.12" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
Egg Crate (EC) Egg (EC) 4.25" 15.79"Egg Crate (EC) 4.25" Egg Crate Crate (EC)15.79" 4.25"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
FourSided Sided (4S) Four 4.25" (4S) 15.79" Four (4S) 4.25" Four Sided Sided (4S) 15.79" 4.25"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
99 . .GGeEnN eE rR aA l LOO pP tT io nN sS IO 9. . G GEEN NEERRAALL O OPPTTIIO ON NSS 9 9 . G E N E R A L O P T I O N S q (SC) Safety Cable* q (FL) Fuse Luminaire 9 . G E N E R A L O P T I O N (FL) Fuse Luminaire (PCL)*Eye Eye Dot Dot Photocell Photocell (SC) Safety CableS q (PCL)* (FL)Fuse FuseLuminaire Luminaire (PCL)* EyeDot Dot Photocell (SC) Safety SafetyCable Cable (* (PCL)* ‘PCL’ not available in ‘250MH’.) (FL) (SC) (* 'PCL' notEye available inPhotocell '250MH'.) q (N) Not Required (FL) Fuse Luminaire (PCL)* Eye Dot (SC) Safety Cable (FL) FuseRequired Luminaire (PCL)* Eye Dot Photocell Photocell (SC) Safety Cable (N) Not (* 'PCL' not available in '250MH'.) (N) Not Required NOTE: *’SC’ safety cable only available with ‘YK’ yoke version (N) Not Required (N) (N) Not Required Not Required
(* 'PCL' not available in '250MH'.) (* (* 'PCL' 'PCL' not not available available in in '250MH'.) '250MH'.) (* 'PCL' not available in '250MH'.)
Barn Door (BD)Barn (BD) 15.79"Barn Door 6.56" (BD) Barn Door Door6.56" (BD)15.79"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
pipe x 4.00" long To tenon fit 2.00" (2.38"O.D.) Topipe fit 2.00" (2.38"O.D.) (min.) tenon x 4.00" long To 2.00" To fit fittenon 2.00"(min.) (2.38"O.D.) pipe x(2.38"O.D.) 4.00" long To fit 2.00" pipe tenon xx(2.38"O.D.) 4.00" long pipe tenon tenon 4.00" long long (min.) pipe x 4.00" (min.) (min.) (min.) 3/4" mounting hardware 3/4" mounting 3/4" hardware mounting 3/4" mounting 3/4" mounting hardware 3/4" mounting hardware hardware 5.63” Removable 5.63” spliceRemovable inspection 5.63” Removable cover 5.63” splice inspection 5.63” Removable 5.63” Removable splice inspection Removable cover splice inspection splicecover inspection inspection Cast tenzalloysplice cover cover fitter Cast tenzalloy cover Cast tenzalloy 1/2"set fitter Cast fitter tenzalloy Cast tenzalloy Cast tenzalloy screws 1/2"set fitter fitter 1/2"set fitter screws 1/2"set 1/2"set screws 1/2"set screws screws screws 3.44” 3.44”
Removable pipeRemovable plug for Removable installing pipe plug for Removable pipe plug for Removable water-tite installing pipe plug for pipe plug installing connector pipe plug for for water-tite installing installing water-tite (supplied) installing connector water-tite water-tite connector water-tite (supplied) connector connector (supplied) connector (supplied) (supplied) (supplied)
PolycarbonateStone StoneGuard Guard (SG)*Polycarbonate (SG)* 1.94" Stone (SG)* Polycarbonate Stone Guard Guard (SG)* Polycarbonate 1.94" 1.94" 1.94" 1.94"
q (N) Required (N) Not Required
NotRequired Required (N)Not (N) (N) Not Required Required (N) Not
(*’SG’ availablewith with‘EC’.) ‘EC’.) (*’SG’ not available (*’SG’ not available with ‘EC’.) (*’SG’ not available with ‘EC’.) (*’SG’ not not available available with with ‘EC’.) ‘EC’.) (*’SG’
1 0 . FFIiN n Ii S sh H 0. . FFIIN NIISSH H 1110 0 . F I N I S H q (BK) B lack (BZ) Dark q (WH) White 1 0 . F I N I S H q(BZ) (BK) Black (WH) W hite Dark Bronze Bronze (B K B la (W H W h ite metal color chip or (BZ) Dark DarkBronze Bronze (*Please supply ((B K )) )B lla cckkck Aluminum q(BZ) ((W H )) )W h itte (*Please supply metal color chip q (AL) Natural (NS)* Non-Standard B K B a W H W h e (BZ) Dark Bronze ‘NS’ (NS)* ((AL) BK) Natural Black Aluminum (WHsupply WRAL# hiiRAL# tsupply e forforany (BZ) Non-Standard Dark Bronze metal colorfinish.) chip or)(*Please supply any ‘NS’ finish.) (AL)Natural NaturalAluminum Aluminum (AL) (AL) (AL) Natural Natural Aluminum Aluminum
(NS)*Non-Standard Non-Standard (NS)* (NS)* (NS)* Non-Standard Non-Standard
REMARKS: R EM MAARRKKSS: : R RE EM R E MA AR RK KS S :: STERNER LIGHTING • 701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com Hubbell Lighting, Inc. HubbellLighting, Lighting,Inc. Inc. Hubbell Hubbell Lighting, Lighting, Inc. Inc. Hubbell
Not Required (N) Not Required Not Required Not Not Required Required
Water-tite Connector Water-tite Water-tite Connector Water-tite Water-tite Connector Water-tite Removable Connector Connector Connector holeRemovable plug for Removable sideyoke hole plug for Removable Removable hole plug for mounting Removable sideyoke hole plug hole plug for for sideyoke hole plug for mounting sideyoke mounting sideyoke mounting mounting mounting
(SG)* Polycarbonate q (SG)* PolycarbonateStone StoneGuard
6.56" 6.56" 6.56" 6.56"
Not Required NotRequired Required Not Not Required
(N)
tter (3.44” SF) ToSfitlip2.00"Fi(2.38"O.D.) 3.44”
3.13” 3.13” 3.13” 3.13” 3.13” 3.13”
(N)Required (N) q (N) Not (N) (N)
lip Fitte r (SF ) S iip q (SF) Slip 3.44” ((S SllFitter p FFiitttte err SF F)) S
Can be mounted to 2.00"Canpipe with be (max) mounted bepipe mounted U-bolts (U-bolts by others). to Can 2.00" (max) with Can be mounted mounted Can be toU-bolts 2.00" pipe (max) with (U-bolts by others). to 2.00" pipe (max) with to 2.00" 2.00"(U-bolts pipe (max) (max) with U-bolts by others). to pipe with U-bolts U-bolts (U-bolts (U-bolts by by others). others). U-bolts (U-bolts by others). 1.50” 1.50” 1.50” 3.50” 1.50” 1.50” 1.50” 3.50” 3.50” 3.50” 3.50” 0.56" 3.50” (4) 0.56" 0.56"(4) 4.50” 3.50” 0.56" 3.50” 0.56" (4) 4.50” 0.56" 3.50” (4) 3.50” 4.50” 3.50” (4) 4.50” 4.50”
((A p byy o tth An nccch ho orrrsss sssu u1.81” pp pllliiie ed db b o1.16” he errrsss...)))bolt (A n h o u p p e d y 1.16” o th e 1.81” 3/8” locking 1.81” 1.16” 3/8” locking 1.81” 1.16” bolt 1.81” 1.16” 3/8” locking 3/8”bolt locking 3/8” locking bolt bolt bolt
3/4" mounting 3/4" mounting hardware 3/4" hardware mounting 3/4" mounting 3/4" mounting hardware 3/4" mounting hardware hardware hardware
Fits 2.00” IPS Fits 2.00” IPS Fits 2.00” IPS Fits Fits 2.00” 2.00” IPS IPS
4.00” 4.00” 4.00” 11.00” 4.00” 4.00” 11.00” 4.00” 4.00” 11.00” 11.00” 4.00” 11.00” 4.00” 4.00” 4.00” 4.00”
(Anchors supplied (Anchors supplied by others.) 2.00”by IPSothers.) tenon 14.38” supplied (Anchors by others.) 2.00” IPS tenon 14.38” 2.00” IPS tenon 2.00” IPS IPS tenon tenon 0.44” (4) 14.38” 2.00” 4.00” 14.38” 14.38” 14.38” 4.00” 0.44”(4)(4) 4.00” 0.44” 0.44” (4) (4) 4.00” 0.44” 4.00” 0.44” (4) 4.00” 8.00” 6.00” 8.00” 6.00” 16.00” 8.00” 6.00” All components 8.00” 6.00” 16.00”steel 8.00” 6.00” 8.00” 6.00” 16.00” 6.00” welded construction All components steel 16.00” 16.00” Allwelded components steel 16.00” 8.00” 6.00” construction All components steel 6.00” welded construction All components steel 8.00” 6.00” welded construction construction welded 8.00” 6.00” welded construction 8.00” 8.00” 8.00”
(SF) Slip Fitter
W Brbay 1.16” coktheetrs.) W ((A ncB ho)rs 1.81” supa plliled 3/8” locking
((A 0.56” An nccch ho orrrsss sssu up pp pllliiie ed db byyy o ottth he errrsss...)))(4) (A n h o u p p e d b o h e 0.56”(4) 0.56” 6.00" dia. 0.56” (4) 0.56” (4) bolt circledia. 6.00" (4) (4) 6.00" boltdia. circle 6.00" dia. 6.00" dia. bolt circle 6.00” 6.00" dia. bolt bolt circle circle 6.00” bolt circle 6.00” 6.00” 6.00”
28.12” 24.00” 28.12” 28.12” 24.00” 24.00” 24.00” 24.00”
All components steel welded construction All components steel Allwelded components steel construction All components steel All components steel welded construction All components steel welded welded construction construction welded construction
7 . YO K E M o U N T I N G O P T I O N S 7. . YO YOKKEE M M oUUN N TIIN NG O OPPTTIIO ON NS 77 k eK E MM oo un t iT O pO tP oIn sN S 7 YO o UN TnIg NG G O S 7(.B..PY) o YO PiaT T Base PK laE te M o U N T I N (G ll BIraO ckeN t S WBO ) W a sle lBBracket B cthekee (nB (nW q (PL) Base Plate chP o)rsBsB up p iePdlPa bla yetoethers.) ((A cB hoB rs)W sWall uW pa pa llileld ba yra ok rst.) q (WB) a s e t r c t (((AB P ) W ) spepPliela B (W (AP nc)hoB rsasu d tbey others.) (AnB ch)orW s sua plplliB edrabc y koe thters.)
3.00” 3.00” 3.00” 3.00” 3.00” 3.00”
2.00" IPS tenon (2) 2.00" IPS 28.12” tenon (2) 2.00" IPS tenon (2) 2.00" IPS IPS tenon tenon28.12” (2) 2.00" (2) 2.00" IPS24.00” tenon (2) 28.12”
(*Please supply metal color chip (*Please supply color chip or supply RAL#metal for any ‘NS’ finish.) (*Please supply metal color chip (*Please metal or supplysupply RAL# for anycolor ‘NS’chip finish.) or or supply supply RAL# RAL# for for any any ‘NS’ ‘NS’ finish.) finish.) or supply RAL# for any ‘NS’ finish.)
2/12 2 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 701 MILLENNIUM BOULEVARD GREENVILLE, TEL 864.678.1000 FAX 864.678.1417 701 MILLENNIUM BOULEVARD GREENVILLE, SC SC 29607 29607 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 TEL864.678.1000 864.678.1000 FAX864.678.1417 864.678.1417 TEL FAX 1/09 www.sternerlighting.com TEL 864.678.1000 FAX 864.678.1417 1/09 www.sternerlighting.com TEL 864.678.1000 FAX 864.678.1417 1/09 www.sternerlighting.com 1/09 www.sternerlighting.com
Job Name: Job Name:_____________________________________
TM
Fixture Type: Fixture Type: ___________________________________ Number: JobJob Number: ___________________________________ Distributor: Distributor: _____________________________________ Distributor P.O.: _________________________________ Distributor P.O.:
fFiI xXtT u dIiM mEeNnSsI iOoNnS s U rR eE D
SWIVEL
YOKE
EPA:EPA: 1.47 1.47 FIXTURE WEIGHT: FIXTURE WEIGHT: 25 25 LBS.LBS.
EPA: 1.47 EPA: 1.47 FIXTURE LBS. FIXTURE WEIGHT: WEIGHT: 2323LBS
10.07" 6.34"
16.12"
9.44"
16.12"
Job Name:
9.44"
14.75"
Fixture Type:
9.45" 6.34" 10.23”
Job Number:
Fits 2.00" pipe Distributor: (2.38" O.D.)
0.81" for 3/4" mounting bolt (supplied by others)
Distributor P.O. :
EXEC - SQ19 Spec Sheet Dimensions: 19" x 19" x 6.75" Arm: 2" x 4" x 8" Tie-Rod Spacing: 3" (9/16" dia. holes)
Remote ballast box box detaildetail (175W(250MH & 250Wonly) only) 5.60" ballast Remote
6.62"(10 - single)
EPA: 1.5 3.0 3.5 5.0
(28 - 2@180) (29 - 2@90) (39 - 3@90) (32 - 3@120) (49 - 4@90)
15.00" 14.50" (4) clearance holes for 3/8" anchors (supplied by others)
4.00"
ORDERING SEQUENCE HOUSING
STYLE/ SIZE
LAMP WATTAGE
REFLECTOR
VOLTAGE
BALLAST
15.75"
SHIELD OPTIONS
MOUNTING
GENERAL OPTIONS
HOUSING FINISH
EXI FINISH
(2) (4) (10) II N n Ff RrA aN nO oRr(3) PPOoLlAa - 6WW RrI iSs- 6(5) R(6)IrTiTtEtNe(7)nS PSEp(8) Ce IcFiI fCi(9) AcTat I OiNo Sn s
(1)
(if req'd)
(11)
2.00"
POLE SECTION
(12)
Housing REFLECTOR HOUSING REFLECTOR EXEC WM 120 SQ19 SG C 2H Powder 70PMH (ED17) The luminaire luminaire housing shall shall be one-piece die-cast208 aluminum integral cooling for heat VFThe luminaire The luminaire yoke shallmodule be of formed aluminum thick and 2.00” wide. Yoke or HS BK reflector (ED17) 100PMH The housing be 3H one-piece die-castwith aluminum with fins integral shall be of0.25” a high purity anodized 5H dissipation. The perimeter of the casting shall incorporate a channel designed to retain a silicone shall allow 10 32 HF 240 N BZ for infinite aiming positions within its aiming range. Yoke version shall be 150PMH (ED17)* cooling fins for heat dissipation. The perimeter of theassembly. casting The shall incorpopatterned specular aluminum in a and choice of forms to provide a wide O-ring gasket, providing a compression seal to the doorframe luminaire housing, equipped with a watertight connector 3’ of 16/3 STO-W cord. PRL 277 WH (ED28) 175PMH 2S rate a channel designed toberetain a silicone O-ring gasket, providing a PRP selection of constricted, rectangular, high-proportioned beam 347 AL including the wire entrance, shall completely sealed from the outside environment. 250PMH (ED28) 3S compression seal to the doorframe assembly. The luminaire patterns. All reflector units (spot to bespun aluminum) shall be backed by an QTZ 480 39 housing, 28 ELECTRICAL MODULE 5S Anodized including wire entrance, shall be completely sealed from the outside FLaluminum extrusion stability repeatability of distribution. LENS & the DOORFRAME 4L Luminaire shall be for cULus listed forand use in wet locations and manufactured from UL LBZ 4W glass, 0.188” thick, thermal and impact resistant. EXI The luminaire lens shall be clear tempered environment. recognized MBZelectrical components. Electrical assembly is easily accessible through the N 70HPS (ED23.5) Lens shall be set into a die-cast aluminum doorframe, gasketed and retained by four continuous reflector module. Each high power factor ballast is capable of starting temperatures DBZ 29 49 ELECTRICAL MODULE 100HPS (ED23.5) galvanized steel clips around the lens perimeter for uniform pressure and watertight seal. down to ABK -20°F (-28.9°C) and shall be CWA. The socket shall be a mogul-based LENS & DOORFRAME 150HPS (ED23.5) Luminaire shall be cULus listed for use in wet locations and manufactured porcelainAAL socket with a 4KV rating. thick, thermal and The luminaire lens250HPS shall(E18) be clear tempered glass, 0.188" from UL recognized electrical components. Electrical assembly is easily Doorframe shall be one-piece die-cast aluminum and secured to the housing with four #10 NS impact Lens stainless shall besteel setscrews. in to a The die-cast doorframe, through the reflector module. Each high power factor ballast is recesessdresistant. and self-retained exterioraluminum shall contain four cored holes for accessible *150PMH requires M102 lamp. LAMP gasketed and retained by four continuo us galvanized steel around the securing external shielding accessories. The inner perimeter of the doorclips casting shall incorporate capable of starting temperatures down the following lamps:to -20°F (-28.9°C) and shall be CWA. REFLECTOR S H I E L D O P T I O N S Luminaire shall accept seal.at two points, providing a The socket lens perimeter for uniform pressure watertight a cchannel, designed to compress the O-ringand gasket in the housing shall be a mogul-base d porcelain socket with a 4KV rating.ED17 50PMH, 70PMH, 100PMH, 150PMH SG Stone Guard 2S Type-II Seg 2H Type-II Hydro 1
3
1
4
1
2
1 1
5
1
1
6
1
1
3
1
“dual seal” to prevent the entrance of contaminants and moisture. 1 1
70HPS, 100HPS, 150HPS
B17
3H Type-III Hydro Type-III Seg HS House Side Doorframe shall be 3Sone-piece die-cast aluminum and secured toShield the 175PMH, 250PMH ED28 5H Type-V Hydro Type-V Seg LAMP To obtain housing four SWIVEL #105S recesessd and self -retained stainless steel the highest level of lighting quality, it is recommended to replace lamps HEAVYwith DUTY N screws. Not RequiredThe 4L Type-IV Long Seg Luminaire shall accept the following lamps: before reaching predicted lamp life per manufacturer’s and IES guidelines. It is also The swivelshall shall be a two-piece aluminum assembly, designed to mountshielding directly to a 2” exterior contain fourdie-cast cored holes for securing external 4W Type-IV Wide Seg 70PMH, 100PMH, 150PMH, 250PMH, ED17 recommended to group re-lamp to175PMH, maintain uniformity and performance. pipe tenon (2.38” Swivel shall incorporate twocasting access panels the side for wire of the door shall inincorporate a c-access accessories. The O.D.). innerperimeter 1 B17 to the splice compartment. Swivel shall mount to the luminaire housing G cULus E Ndesigned E recognized R A L Oto P Tcompress IO N S the FINIS H two Owith P T two I O N S 00H P S, 150H P S channel, O-ring gasket in the housing at 175PMH, 250PMH (remote)BALLAST BOX (250MH) ED20 diecast hubs for additional mounting support and locking capability to withstand the toughest of REMOTE MOUNTED HF Horizontal Slip Fitter Powder Anodized WM Wall Mount points, providing a “dual to prevent theaiming entrance of contaminants and 3.5" environmental conditions andseal” shall allow for infinite positions within its aiming range. Ballast shall be housed in aofcast housing with heat dissipating fins and To obtain the highest level ighting l aluminum quality, it is recommended to replace moisture. LBZ supplied Light Bronze BK Black with (2) watertight connectors. Ballast boxper shallmanufacturer’s have a cast aluminum cover 3" lamp life and IES lamps before reaching predicted MBZ Medium Bronze BZ Dark Bronze and is It secured (6) plated steel fasteners. shall to be maintain capable of mounting at a YOKE 5.5" guidelines. is alsowith recommended to groupBallast re-lamp uniformity DBZ Dark Bronze WH White HEAVY DUTY SWIVEL distance of 200 ft. (based on 10-gauge wire and 1% voltage drop). The cast aluminum The luminaire yoke shall be of formed aluminum 0.25” thick and 2.00” wide. Yoke shall allow for Black performance. AL Natural Aluminum alloy shall contain less than 2/10 of 1% copper for resistance to corrosion including The swivel shall be awithin two-piece aluminum assembly, designed to andABK infinite aiming positions its aimingdie-cast range. Yoke version shall be equipped with a watertight AAL Natural Aluminum PRL Photocell Receptacle marine applications. Luminaire connector and 3’ to of 16/3 STO-W cord. (2.38" O.D.). mount directly a 2" pipe tenon Swivel shall incorporateNS two Non-Standard Finish PRP Photocell Receptacle splice(consult factory)REMOTE MOUNTED BALLAST BOX (250MH) access panels in the side for wire access to the cULus recognized Pole Cap BallastFINISH shall be housed in a cast alumin um housing with heat dissipating fins compartment. Swivel shall mount to QTZ the Quartz luminaire housing with two dieVF Vertical Slip Fitter Restrike Finished parts in a multistage phosphate processing finished and supplied withare(2)washed watertight connectors. Ballast box system shall and have a cast cast hubs for additional mounting FLsu pport and locking capability to Fuse Luminaire with a polyester urethane powder coat paint. Standard colors are dark bronze, black, cover and is secured with (6) plated steel fasteners. Ba llast shall be EXI Extruded Arm Insert withstand the toughest of environmental conditions and shall allow for aluminum white, and natural aluminum. Contact factory for nonstandard colors. (flat sheet) capable of mounting at a distance of 200 ft. (based on 10-gauge wire and 1% infinite aiming positions within its aiming range. N Not Required voltage drop). The cast aluminum alloy shall contain less than 2/10 of 1% copper for resistance to corrosio n including marine applications. YOKE Millennium • Greenville, 29607 • 2.00" TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com The luminaire yoke shall 701 be701 of formed Blvd aluminum 0.25"SCthick and MILLENNIUM BOULEVARD GREENVILLE, SC 29607 TEL 864.678.1000 FAX 864.678.1417 wide. Yoke shall allow for infinite aiming positions within its aiming range. FINISH the right to change specifications without notice. In the interest of continuous product improvement, Sterner Lighting reserves Hubbell 2/09 www.sternerlighting.com Inc. ector and 3' of 16/3 Yoke version shall be equipped with a watertight conn Finished parts Lighting, are washed in a multistage phosphate processing system and STO-W cord. finished with a polyester urethane powder coat paint. Standard colors are dark bronze, black, white, and natural aluminum. Contact factory for non- 1 standard colors. 1
4
1
1
1
E.P.D.M. gasket
J-box or conduit by others
1/2" bolt
1/2" 14 NPT
(supplied w/ plugs)
Fits 2" O.D. pipe
(4) 3/8" anchors (by others) with 3/4" bolt projection.
(7.69"H x 5.62"W x 1.75"T)
5
(2.875" O.D. and 9.88"H) (mounts to 2.38" O.D. tenon or pipe)
thru bolt use optional (4) 5/16" - 18 SST socket head set screws
6
Notes: 1) 2) 3) 4) 5)
All reflectors (minus the 5H & 5S) are field rotatable without tools. '32' mounting (3@120) only available with round pole or modified pole top fitter. The 'SG' stone guard option is clear polycarbonate and attaches to the door via (2) extrusions. The 'HS' house side shield option is n/a with the '5H' or '5S' reflector. The 'QTZ' quartz restrike option will have a 2-minute delay, and is only available in150W with DCBAYONET. 6) If the color for the 'EXI' extruded arm insert is not specified, insert will be brushed aluminum.
SEQUENCE P oORDERING laris-6 ORDERING SEQUENCE ORDERING SEQUENCE
ORDERING ORDERING SEQUENCE S e q u2e n c e
ORDERING rderin Item O Sequence: 1 g ItemSequence: Sequence: 1 Item 1 Item Sequence: 1 Item Sequence: 1
ORDER ORDER ORDER NUMBER: ORDER ORDER NUMBER: NUMBER: NUMBER: NUMBER:
HOUSING HOUSING HOUSING HOUSING HOUSING HOUSING
PL6 PL6 PL6
PL6 PL6 PL6
1. HOUSING HOUSING 1.1.HOUSING HOUSING 1. HOUSING 1 1. .(PL6) H ousing
q
(PL6) (PL6) (PL6) (PL6) (PL6)
3 3 3 3 3
2 2 2 2
LAMP LAMP WATTAGE LAMP LLLA WATTAGE A M AM MPPP WATTAGE WATTAGE WATTAGE WATTAGE 70PMH
70PMH 100PMH 70PMH 70PMH 50PMH 100PMH 70PMH 150PMH 100PMH 100PMH 70PMH 150PMH 100PMH 175PMH 150PMH 150PMH 100PMH 175PMH1, 2, 7 150PMH 250PMH 175PMH 150PMH 175PMH 250PMH1, 1,2, 2,7 7 175PMH 250PMH 1,1,5,7 2, 175PMH 2, 77 250PMH 250PMH3 1,1,5,7 100HPS 250PMH 100HPS3 3 150HPS 100HPS 3 100HPS 150HPS333 3 100HPS 150HPS 3 70HPS 150HPS 150HPS 3 3
BEAM BEAM PATTERN BEAM BEAM PATTERN BEAM BEAM PATTERN PATTERN PATTERN PATTERN SP 2
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
VOLTAGE VOLTAGE VOLTAGE V V O A G VO OLLLTTTA AG GEEE
BALLAST BALLAST BALLAST BALLAST BALLAST BALLAST
MODEL MODEL STYLE MODEL MODEL STYLE MODEL MODEL STYLE STYLE STYLE STYLE SW
120 120
SP 2
C
C
7 7 7 7 7 MOUNTING MOUNTING OPTIONS MOUNTING MOUNTING OPTIONS MOUNTING MOUNTING OPTIONS PD OPTIONS OPTIONSBP OPTIONS
PD WM
SFBP
8 8 8 8 8
9 9 9 9 9
10 10 10 10 10
SHIELD SHIELD OPTIONS SHIELD SHIELD OPTIONS SHIELD SHIELD OPTIONS OPTIONS OPTIONS OPTIONS TS
GENERAL GENERAL OPTIONS GENERAL OPTIONS GENERAL GENERAL GENERAL OPTIONS OPTIONS OPTIONS OPTIONS FL
FINISH FINISH FINISH FINISH FINISH FINISH
TS
BK BK
FL
PD BP SW 4 2 4 4S SC BZ RN 208 TS FL BK SP 120 CC PD BP PD SW YK 22 1,7 WM SFPL 5 PD BP TS FL BK SP 120 SW DP SP 120 FL BK TS WB SW WM 4S2 SC4 74 BZ RN 208 SF TS FL BK SP 120 C SW YK4 4 EC PCL WH RM 240 WM 5 4S SC BZ RN 208 SF WM SF DP 444 7 YK WB 2 4 WM 5 4 ST SF 4S SC BZ RN 208 208 RN SC DP BZ 4S YK EC PCL7 RM 240 YK WB 44 55 4S SC BZWH RN 208 RW BD AL 277 DP YK EC PCL WH RM 240 WB DP WB STonly) (yoke (swivel only) 775 DP 2 EC PCL WH RM 240 WB RM 240 ST PCL WH 7 RW EC AL 277 ECBD6 PCL WH RM 3 240 SG N 347 ST (swivel only) (yoke only) HPN RW BD AL 277 ST ST only) (swivel (yoke only) RW BD AL 277 277 RW SG62 6 N 347 AL HPN323 BD RW (swivel only) (yoke BD AL 8 277 (swivel only)N (yoke (yoke only) only) HPM NS (swivel only) only) SG N 347 HPN N (swivel only) (yoke only) 662 2 333 1,3,7 SG N 347 HPN HPN 347 HPM N 6 NS8 8 SG N 347 SG HPN Ndoubles the fixture quantity 2 N unless otherwiseNS HPW HPM N 2 2 Notes: 1) '250MH' only available with remote ballast. 5) N 'DP' option automatically specified. 886 HPM N NS N N 8 HPM 480 HPW2221,7 NS NSspecified. HPM 'DP'not option automatically doubles the fixture quantity unless otherwise Notes:2)1)'250MH' '250MH'not only available with'HPM', remote'HPW', ballast.distributions. N availble in 'SP', 6)5)N 'SG' available withN 'EC'. HPW 2 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. Notes: 1) '250MH' only available with remote ballast. 1,7 HPW HPW 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. 1) '250MH' only available with remote ballast. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions. 6) 'SG' not available with 'EC'. 3) 'HPN' distribution only available in '100HPS' & '150HPS'. 7) 'PCL' option not available with '250MH' remote box version. 5) 'DP' option automatically doubles the fixture quantity unless otherwise specified. HPW 22 Notes: Notes: 1) '250MH' only available with remote ballast. 5 ‘PCL’ option not available with version unless otherwise specified. Notes:1) 1'250MH' 175PMH &only 250PMH use remote ballast box; 2ft max distance, for longer distances option 5) 'DP' automatically doubles theremote fixturebox quantity Notes: available with remote ballast. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions.
6) 'SG' not available with 'EC'. 6)7)Please 'SG' not available with 'EC'. 'PCL' not available with '250MH' remote box version. 8) supply metal color chip or supply RAL# any 'NS' finish. 6) 'SG' not available with 'EC'. 6option option Please supply chip to match or specify colorfor for anyversion. ‘NS’ non-standard finish 6) available with 'EC'. 7) 'SG' 'PCL' not not available with '250MH' remote box 7) 'PCL' option not available with '250MH' remote box version. Please supply metal chip or supply RAL# for any 'NS'‘HPM’, finish.and ‘HPW’ 7 175w PMH &color 250w PMH not available with ‘SP’, ‘HPN’, 7)8)Please 'PCL' option not available with '250MH' remote box version. 7) 'PCL' option not available with '250MH' remote 8) supply metal color chip or supply RAL# forbox anyversion. 'NS' finish. 8) Please supply metal color chip or supply RAL# for any 'NS' finish. reflector options 8) Please Please supply supply metal color chip chip or or supply supply RAL# RAL# for for any any 'NS' 'NS' finish. finish. 8) metal color
'HPN' distribution only available in'YK' '100HPS' & '150HPS'. 2) '250MH' not availble in 'SP', 'HPW', distributions. 4) is distribution only the'HPM', yoke version. 2)3)'SC' '250MH' notavailable availble inavailable 'SP', 'HPM', 'HPW', distributions. contact factory 3) 'HPN' onlywith in '100HPS' & '150HPS'. 2) '250MH' not availble in 'SP', 'HPM', 'HPW', distributions. 3) distribution only available in '100HPS' & '150HPS'. 4)'HPN' 'SC' is only available withunless the yoke 'YK' specified version. 3) 'HPN' only available in & 4) Standard shield finish is with black otherwise 3) 2 'SC' 'HPN' distribution only available in '100HPS' '100HPS' & '150HPS'. '150HPS'. is distribution only available the yoke 'YK' version. is available with 4) ‘HPN’ distribution only available HPS 'YK' 4) 3 'SC' 'SC' is only only available with the theinyoke yoke 'YK' version. version. 4) 'SC' is only available with the yoke 'YK' version. 4 ‘SC’ safety cable in only available with ‘yk’ yoke version
100HPS 150HPS 2 .3
L A M P WAT TA G E 2 . L A M P WAT TA G E
. IL A M P WAT TA G E O D IUM 2 L A M WAT G E H2A2 2.L..LL LDa AEm MpP P Wat WATtTA TA G E aSSg Oe DI IUUM M D E S O D HHA AAL II ID E ED17 B17 (70PMH) (100HPS) S O D II(100HPS) U H L D E S O D UM M H A L (70PMH) I(70PMH) DE E D 1 7 B 1 E D 1 7 B 1 77 (100HPS) ED17 B17 (100PMH) (150HPS) 3 E D 1 7 B 1 (70PMH) ED17 (100HPS) q (50PMH) q (70HPS) B17 E D 1 7 17 7 (70PMH) (100HPS) ED17 B17 (100PMH) ED17 (150HPS) B B17 (100PMH) (150HPS) ED17 (150PMH) 3 B17 (100PMH) (150HPS) ED17 q (70PMH) ED17 q (100HPS) B17 ED17 B17 (100PMH) (150HPS) ED17 (150PMH) ED17 (150PMH) * ED20 (175PMH) 250PMH' only 3 available with ED17 (* '175PMH& q (100PMH) (150PMH) q (150HPS) B17 (150PMH) * ED17 ED20 remote (175PMH)*ED17 (* '175PMH& 250PMH' only available with ballast.)250PMH' ED20 (175PMH) (* '175PMH& only available with * ED28 (250PMH) ED20 (175PMH) * (* '175PMH& 250PMH' available with ballast.) q (150PMH) (*remote '175PMH& 250PMH' only onlyavailable availablewith with *ED17 ED20 (175PMH) only available with (* '175PMH& 250PMH' not remote ballast.) * ED28 (250PMH) ‘175PMH& 250PMH’ only available with ballast.) * ED28 (*remote (250PMH) remote ballast.) (* '175PMH& 250PMH' not available with 'SP', 'HPM', 'HPW', 'BI', & options.) ED28 remote (250PMH) **ED28 ballast.) q (175PMH)* (* '175PMH& 250PMH' not'PCL' available with ED28 (250PMH) (* '175PMH& 250PMH' not available with 'SP', 'HPM', 'HPW', 'BI', & 'PCL' options.) (* '175PMH& 250PMH' not available with (*'SP', ‘175PMH& 250PMH’ with 'HPM', 'HPW', 'BI',not & available 'PCL' options.) 'SP', 'HPM', 'HPW', 'BI', 'PCL' options.) q (250PMH)* ED28 ‘SP’, 'SP',‘HPM’, 'HPM',‘HPW’, 'HPW',‘BI’, 'BI',&& &‘PCL’ 'PCL'options.) options.) 'SP', 'HPM', 'HPW', 'BI', & 'PCL' options.)
3 . B E A M PAT T E R N 3 . BBEEAAM M PAT PATTTEERRN N 3 3(....SPB B A M PAT T R N )* E 33 ea Pat t E Am M (RN) PAT TeE Er Rn N (RM) ( S P ) * (RN) (RM) ((S P))** (RN) (RM) (RN) (RM) q (SP)* q (RN) (S SP P)* (RN) (RM) q (RM) (HPN)** (HPN)**
(HPM)* (HPM)*
(HPN)** ((H PM )* (HPN)** q (HPM)** q (HPN)** (H HP PM M))**
(RW) (RW)
((R W)) q (RW) (R RW W)
(HPW)* (HPW)*
((H PW )* q (HPW)** (H HP PW W))**
(* 'SP', 'HPM', 'HPW', not available in '250MH'. ) (* 'HPN' 'SP', 'HPM', 'HPW', in not'HPS'.) available in '250MH'. ) (** only available (* 'SP', 'HPM', 'HPW', not available in '250MH'. ) 'HPN' only'HPW', available inavailable 'HPS'.) inin (* 'SP', 'HPM', not '250MH'. (SP=spot , R=rectangular,HP=high-point, (*(** 'SP', 'HPM', 'HPW', not available inN=narrow, '250MH'.))))M=medium, W=wide.) (* ‘SP’, ‘HPM’, not ‘250MH’. (* 'SP', 'HPM', 'HPW', not available in '250MH'. (** 'HPN' only ‘HPW’, available in available 'HPS'.) (SP=spot ,only R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (** 'HPN' only available in 'HPS'.) (** 'HPN' only available in in 'HPS'.) 'HPS'.) (** ‘HPN’ available ‘HPS’.) (** 'HPN' (SP=spot , R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (SP=spot , R=rectangular,HP=high-point, N=narrow, (SP=spot , R=rectangular,HP=high-point, N=narrow, M=medium, W=wide.) (SP=spot R=rectangular,HP=high-point,N=narrow, N=narrow,M=medium, M=medium,W=wide.) W=wide.) (SP=spot ,, R=rectangular,HP=high-point, M=medium, W=wide.)
6. MODEL STYLE 5. BALLAST 4 . V O LTA G E 6. . M M OD D ELL SSTTYYLLEE 5. . BBAALLLLAASSTT 4. . VVO OLTA LTAG GEE 6 5 6 M O D E L 5 .. (C)* B L S 4.(120) .. VV O LTA BA aCore lL l&A aCoil sT t 44 a gG MO o dE eL l S tY y10.07" lE e Swivel (YK) Yoke 4 Vo Olt LTA GeE E 6 ..(SW) M O D E L ST T Y L E 5 B A L L A S T 9.45" (SW) Swivel Swivel (YK) Yoke Yoke (120) (C)*Core Core&&Coil Coil 16.12" 16.12" (SW) (YK) (120) (C)* 6.34"10.07" 6.34"9.45" 16.12" (SW) Swivel (YK) Yoke (120) (C)* Core & Coil 16.12" 10.07" q (120) q (C)* Core & Coil (208) q (SW) Swivel q (YK) 9.45" 6.34" 16.12" (C)* Core & Coil (SW) Swivel (YK)Yoke Yoke (120) 16.12" 10.07" 6.34" 10.07" 9.45" 6.34" 16.12" 16.12" 9.45" 10.07" (208) 6.34" 16.12" 16.12" 9.45" 6.34" 16.12" (208) 6.34" 6.34" 6.34" 9.44" 6.34" (208) q (208) (240) 9.44" (208) 10.23" 9.44" 14.75" (240) 9.44" 9.44" 10.23" (240) 9.44" 9.44" 10.23" q (240) 9.44" 14.75" (240) 9.44" 10.23" 14.75" (277) 9.44" (240) 10.23" (* Core & coil ballast is high-power factor 14.75" 14.75" (277) 14.75" Fits 2.00" pipe 0.81" for 3/4" mounting (* Core & coil ballast is high-power factor (277) q (277) and rated (-28.9°C).) (* Core & for coil-20°F ballast is high-power factor (2.38 O.D.)pipe (277) Fits 2.00" 0.81" boltfor by3/4" othersmounting 2.00" (347) (*and Core & coil ballast is high-power factor (277) rated forballast -20°F is (-28.9°C).) Fits (2.38 2.00" O.D.) pipe 0.81" for 3/4" mounting Core & coil coil ballast ishigh-power high-powerfactor factor (* Core & Core & coil ballast is high-power factor bolt3/4" by others and rated for -20°F (-28.9°C).) Fits 2.00" pipe 0.81" for mounting 2.00" (347) Fits 2.00" pipe (2.38 O.D.) for 3/4" and rated for -20°F (-28.9°C).) Fits 2.00" pipe q (347) (*’250MH’ remote ballast box.) (347) EPA: 1.47 WT:O.D.) 25 LBS. EP0.81" A: bolt 1by .4others 7mounting WT: 23 LB2.00" S. rated for foruses -20°F (-28.9°C).) and -20°F (-28.9°C).) (2.38 and rated rated for -20°F (-28.9°C).) bolt by others 2.00" (347) bolt by others (2.38 O.D.) 2.00" (*’250MH’ uses remote ballast box.) EPA: 1.47 WT: 25 LBS. EPAbolt : by1others .47 WT: 23 L2.00" BS. (347) (*’250MH’ uses remote ballast box.) EPA: 1.47 WT: 25 LBS. EPA: 1.47 WT: 23 LBS. q (480) (*’250MH’ uses remote ballast box.) E W E W (*’250MH’ uses uses remote remoteballast ballastbox.) box.) (*’250MH’ EP PA A::: 1 1...4 47 7 WTTT::: 2 25 5 LLLB BS S... EP PA A:: 1 1..4 47 7 WTTT::: 2 23 3 LLLB BS S... (*’250MH’ E P A 1 4 7 W 2 5 B S W 2 3 B S 7. SWIVEL MoUN T I Nuses Gremote Oballast P T box.) I O N S (’DP’ option automatically doubles the fixture quantity unless otherwise specified.) EPA: 1.47 7. . SSW WIIVVEELL M Mo oUUN NTTIIN NG GO OPPTTIIO ON NSS (’DP’ (’DP’ option automatically doubles the fixture quantity unless otherwise specified.) 7 option automatically doubles the fixture quantity unless otherwise specified.) 77 . .. SS gG p(ST) tT io nN sS option automatically doubles the fixture quantity unlessunless otherwise specified.) 7 Sw WiIIvPad VeE ElL LM Moo ouU UnN NtT Ti n N GOO O P T O N S(’DP’(’DP’ (’DP’ option automatically doubles the fixture quantity otherwise specified.) (’DP’ option automatically doubles the fixture fixture quantity unless otherwise specified.) W V M II N P II O option automatically doubles the quantity unless otherwise specified.) Post-Top Mount (DP) Dual Base Stanchion (PD) (N) Wall Mount (WM) DualPost-Top Post-TopMount Mount (DP) Dual BasePad Pad Stanchion (PD) Base (ST)Mount (N)Required WallMount Mount (WM)supplied (2.00” sch. 40 q (ST) Stanchion (Anchors supplied by others.) 2.38” (Anchors by others.) (DP) Stanchion (PD) (ST) (N) Wall Not (WM) q (PD) Base Pad q (DP) Dual Post-Top Mount q (WM) Wall Mount steel pipe) Wall Mount (WM) (2.00” sch. 40 q (N) Mount (AnchorsBase supplied by others.) O.D. Dual Post-Top Mount (DP) Base Pad Stanchion (PD) (ST) (N) 2.38” (Anchors supplied by others.) Dual Post-Top Mount (DP) Pad Stanchion (PD) (ST) Not Required 0.56 (N) Wall Mount (WM) (2.00” 40 Mount Mount 2.06 (Anchors supplied by others.) 2.38” 2.00” IPS (Anchors supplied bytenon others.) steelsch.pipe) 2.00” IPS tenon Mount
O.D. (2.00” sch. 40 40 (Anchors supplied by(4) others.) 2.38” (2.00” sch. 0.56 steel pipe) 2.38” (2.00” sch. 40 I.D. O.D. by 2.06(Anchors supplied by 2.38” 0.56others.) steel pipe) pipe) O.D. steel 2.06I.D. (4) O.D. steel pipe) 0.56 O.D. 0.56 2.06 (4) 0.56 2.06 I.D. 2.06 (4) (4) dia I.D. (4) 6.00” I.D. bolt6.00” circledia 6.25” 6.00” bolt dia circle 6.25” 6.00” dia 0.25” 6.00” 6.00” dia bolt circle 6.00” dia 6.25” bolt 6.25” 0.25” 6.00” bolt circle circle 6.25” 6.25” bolt circle 0.25” 6.00” 0.25” 6.00” 0.25” 6.00” 6.00” All components steel 0.25” welded construction All components steel Allwelded components steel construction All components steel All components steel welded construction All components steel welded construction welded construction construction welded
Mount 2.00” IPS tenon 2.00” IPS tenon 2.00” IPS IPS tenon tenon 4.50” 2.00” 4.50” 4.50” 4.50” 4.50” 4.50” 4.50” 4.50” All components4.50” steel 4.50” 4.50” 4.50” welded construction All components steel All components steel (For concrete pour) welded construction All components steel All components steel welded construction All components steel (For concrete pour) welded construction (For concrete pour) welded construction (For concrete pour) (For (For concrete concrete pour) pour)
21.75” 21.75” 21.75” 21.75” 21.75” 21.75”
((ABnP ch)orsBsa upspeliePdla btyeothers0.56” .)
5/8" pivot bolt pivot 5/8" 3/4" mounting 5/8" pivot bolt hardware pivot 3/4" mounting 5/8" 5/8" pivot pivot 3/4" hardware mounting 5/8"bolt bolt bolt 3/4" mounting bolt 3/4" mounting hardware 3/4" mounting hardware hardware hardware
1.50” 1.50” 1.50” 1.50” 1.50” 1.50” Cast ductile iron wallCast bracket ductileand iron Cast ironand horizontal sector wallductile bracket Cast ductile iron wall bracket and Cast ductile iron horizontal sector wall bracket and wall bracket and horizontal sector wall bracket and horizontal horizontal sector sector horizontal sector
3.00” 1.38” 3.00” 3.00” 1.38” 3.00” 3.00” 1.38” 3.00” 0.38” 1.38” 1.38” Cast ductile iron 0.38” 1.38” surface baseiron 0.38” Cast ductile Castsurface ductile base iron 0.38” 0.38” Cast ductile iron Cast ductile iron surface base Cast ductile iron 0.38” surface surface base base surface base
8.00” 5.50” 8.00” 8.00” 5.50” 8.00” 8.00” 5.50” 5.50” 5.50” 5.50”
(Standard shield finish is black unless otherwise specified.) S Hi IeEl L DOOpP IO N 88 .8.. S d tPT iTo n sNS . Sh (Standard shield finish is black unless otherwise specified.) SH HIIEEL LD DO OP ON S (Standard 8 shield finish is black unless otherwise specified.) T IIIO S 8 . (Standard S H I E L D is O P T unless O otherwise N S specified.) (Standard shield finish black unless specified.) 8 . Top (Standard shield SH I E L D O PqT(EC) Egg shield finish is black black unless ION otherwiseq specified.) Shield EggS Crate FourSided Sidedotherwise (TS) (EC) (4S)is q (TS) Top Shield Crate q finish (4S) Four (BD) BarnDoor Door (BD)Barn
TopShield Shield4.25" (TS)15.79" Top (TS) Top (TS) 4.25" 15.79" Top Shield Shield 4.25" (TS) 15.79" 15.79" 8.12" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
Egg Crate (EC) Egg (EC) 4.25" 15.79"Egg Crate (EC) 4.25" Egg Crate Crate (EC)15.79" 4.25"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
FourSided Sided (4S) Four 4.25" (4S) 15.79" Four (4S) 4.25" Four Sided Sided (4S) 15.79" 4.25"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
4.25" 4.25" 4.25"
99 . .GGeEnN eE rR aA l LOO pP tT io nN sS IO 9. . G GEEN NEERRAALL O OPPTTIIO ON NSS 9 9 . G E N E R A L O P T I O N S q (SC) Safety Cable* q (FL) Fuse Luminaire 9 . G E N E R A L O P T I O N (FL) Fuse Luminaire (PCL)*Eye Eye Dot Dot Photocell Photocell (SC) Safety CableS q (PCL)* (FL)Fuse FuseLuminaire Luminaire (PCL)* EyeDot Dot Photocell (SC) Safety SafetyCable Cable (* (PCL)* ‘PCL’ not available in ‘250MH’.) (FL) (SC) (* 'PCL' notEye available inPhotocell '250MH'.) q (N) Not Required (FL) Fuse Luminaire (PCL)* Eye Dot (SC) Safety Cable (FL) FuseRequired Luminaire (PCL)* Eye Dot Photocell Photocell (SC) Safety Cable (N) Not (* 'PCL' not available in '250MH'.) (N) Not Required NOTE: *’SC’ safety cable only available with ‘YK’ yoke version (N) Not Required (N) (N) Not Required Not Required
(* 'PCL' not available in '250MH'.) (* (* 'PCL' 'PCL' not not available available in in '250MH'.) '250MH'.) (* 'PCL' not available in '250MH'.)
Barn Door (BD)Barn (BD) 15.79"Barn Door 6.56" (BD) Barn Door Door6.56" (BD)15.79"
15.79" 15.79" 8.12" 15.79" 15.79" 8.12" 8.12" 8.12" 8.12" 8.12"
pipe x 4.00" long To tenon fit 2.00" (2.38"O.D.) Topipe fit 2.00" (2.38"O.D.) (min.) tenon x 4.00" long To 2.00" To fit fittenon 2.00"(min.) (2.38"O.D.) pipe x(2.38"O.D.) 4.00" long To fit 2.00" pipe tenon xx(2.38"O.D.) 4.00" long pipe tenon tenon 4.00" long long (min.) pipe x 4.00" (min.) (min.) (min.) 3/4" mounting hardware 3/4" mounting 3/4" hardware mounting 3/4" mounting 3/4" mounting hardware 3/4" mounting hardware hardware 5.63” Removable 5.63” spliceRemovable inspection 5.63” Removable cover 5.63” splice inspection 5.63” Removable 5.63” Removable splice inspection Removable cover splice inspection splicecover inspection inspection Cast tenzalloysplice cover cover fitter Cast tenzalloy cover Cast tenzalloy 1/2"set fitter Cast fitter tenzalloy Cast tenzalloy Cast tenzalloy screws 1/2"set fitter fitter 1/2"set fitter screws 1/2"set 1/2"set screws 1/2"set screws screws screws 3.44” 3.44”
Removable pipeRemovable plug for Removable installing pipe plug for Removable pipe plug for Removable water-tite installing pipe plug for pipe plug installing connector pipe plug for for water-tite installing installing water-tite (supplied) installing connector water-tite water-tite connector water-tite (supplied) connector connector (supplied) connector (supplied) (supplied) (supplied)
PolycarbonateStone StoneGuard Guard (SG)*Polycarbonate (SG)* 1.94" Stone (SG)* Polycarbonate Stone Guard Guard (SG)* Polycarbonate 1.94" 1.94" 1.94" 1.94"
q (N) Required (N) Not Required
NotRequired Required (N)Not (N) (N) Not Required Required (N) Not
(*’SG’ availablewith with‘EC’.) ‘EC’.) (*’SG’ not available (*’SG’ not available with ‘EC’.) (*’SG’ not available with ‘EC’.) (*’SG’ not not available available with with ‘EC’.) ‘EC’.) (*’SG’
1 0 . FFIiN n Ii S sh H 0. . FFIIN NIISSH H 1110 0 . F I N I S H q (BK) B lack (BZ) Dark q (WH) White 1 0 . F I N I S H q(BZ) (BK) Black (WH) W hite Dark Bronze Bronze (B K B la (W H W h ite metal color chip or (BZ) Dark DarkBronze Bronze (*Please supply ((B K )) )B lla cckkck Aluminum q(BZ) ((W H )) )W h itte (*Please supply metal color chip q (AL) Natural (NS)* Non-Standard B K B a W H W h e (BZ) Dark Bronze ‘NS’ (NS)* ((AL) BK) Natural Black Aluminum (WHsupply WRAL# hiiRAL# tsupply e forforany (BZ) Non-Standard Dark Bronze metal colorfinish.) chip or)(*Please supply any ‘NS’ finish.) (AL)Natural NaturalAluminum Aluminum (AL) (AL) (AL) Natural Natural Aluminum Aluminum
(NS)*Non-Standard Non-Standard (NS)* (NS)* (NS)* Non-Standard Non-Standard
REMARKS: R EM MAARRKKSS: : R RE EM R E MA AR RK KS S :: STERNER LIGHTING • 701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com Hubbell Lighting, Inc. HubbellLighting, Lighting,Inc. Inc. Hubbell Hubbell Lighting, Lighting, Inc. Inc. Hubbell
Not Required (N) Not Required Not Required Not Not Required Required
Water-tite Connector Water-tite Water-tite Connector Water-tite Water-tite Connector Water-tite Removable Connector Connector Connector holeRemovable plug for Removable sideyoke hole plug for Removable Removable hole plug for mounting Removable sideyoke hole plug hole plug for for sideyoke hole plug for mounting sideyoke mounting sideyoke mounting mounting mounting
(SG)* Polycarbonate q (SG)* PolycarbonateStone StoneGuard
6.56" 6.56" 6.56" 6.56"
Not Required NotRequired Required Not Not Required
(N)
tter (3.44” SF) ToSfitlip2.00"Fi(2.38"O.D.) 3.44”
3.13” 3.13” 3.13” 3.13” 3.13” 3.13”
(N)Required (N) q (N) Not (N) (N)
lip Fitte r (SF ) S iip q (SF) Slip 3.44” ((S SllFitter p FFiitttte err SF F)) S
Can be mounted to 2.00"Canpipe with be (max) mounted bepipe mounted U-bolts (U-bolts by others). to Can 2.00" (max) with Can be mounted mounted Can be toU-bolts 2.00" pipe (max) with (U-bolts by others). to 2.00" pipe (max) with to 2.00" 2.00"(U-bolts pipe (max) (max) with U-bolts by others). to pipe with U-bolts U-bolts (U-bolts (U-bolts by by others). others). U-bolts (U-bolts by others). 1.50” 1.50” 1.50” 3.50” 1.50” 1.50” 1.50” 3.50” 3.50” 3.50” 3.50” 0.56" 3.50” (4) 0.56" 0.56"(4) 4.50” 3.50” 0.56" 3.50” 0.56" (4) 4.50” 0.56" 3.50” (4) 3.50” 4.50” 3.50” (4) 4.50” 4.50”
((A p byy o tth An nccch ho orrrsss sssu u1.81” pp pllliiie ed db b o1.16” he errrsss...)))bolt (A n h o u p p e d y 1.16” o th e 1.81” 3/8” locking 1.81” 1.16” 3/8” locking 1.81” 1.16” bolt 1.81” 1.16” 3/8” locking 3/8”bolt locking 3/8” locking bolt bolt bolt
3/4" mounting 3/4" mounting hardware 3/4" hardware mounting 3/4" mounting 3/4" mounting hardware 3/4" mounting hardware hardware hardware
Fits 2.00” IPS Fits 2.00” IPS Fits 2.00” IPS Fits Fits 2.00” 2.00” IPS IPS
4.00” 4.00” 4.00” 11.00” 4.00” 4.00” 11.00” 4.00” 4.00” 11.00” 11.00” 4.00” 11.00” 4.00” 4.00” 4.00” 4.00”
(Anchors supplied (Anchors supplied by others.) 2.00”by IPSothers.) tenon 14.38” supplied (Anchors by others.) 2.00” IPS tenon 14.38” 2.00” IPS tenon 2.00” IPS IPS tenon tenon 0.44” (4) 14.38” 2.00” 4.00” 14.38” 14.38” 14.38” 4.00” 0.44”(4)(4) 4.00” 0.44” 0.44” (4) (4) 4.00” 0.44” 4.00” 0.44” (4) 4.00” 8.00” 6.00” 8.00” 6.00” 16.00” 8.00” 6.00” All components 8.00” 6.00” 16.00”steel 8.00” 6.00” 8.00” 6.00” 16.00” 6.00” welded construction All components steel 16.00” 16.00” Allwelded components steel 16.00” 8.00” 6.00” construction All components steel 6.00” welded construction All components steel 8.00” 6.00” welded construction construction welded 8.00” 6.00” welded construction 8.00” 8.00” 8.00”
(SF) Slip Fitter
W Brbay 1.16” coktheetrs.) W ((A ncB ho)rs 1.81” supa plliled 3/8” locking
((A 0.56” An nccch ho orrrsss sssu up pp pllliiie ed db byyy o ottth he errrsss...)))(4) (A n h o u p p e d b o h e 0.56”(4) 0.56” 6.00" dia. 0.56” (4) 0.56” (4) bolt circledia. 6.00" (4) (4) 6.00" boltdia. circle 6.00" dia. 6.00" dia. bolt circle 6.00” 6.00" dia. bolt bolt circle circle 6.00” bolt circle 6.00” 6.00” 6.00”
28.12” 24.00” 28.12” 28.12” 24.00” 24.00” 24.00” 24.00”
All components steel welded construction All components steel Allwelded components steel construction All components steel All components steel welded construction All components steel welded welded construction construction welded construction
7 . YO K E M o U N T I N G O P T I O N S 7. . YO YOKKEE M M oUUN N TIIN NG O OPPTTIIO ON NS 77 k eK E MM oo un t iT O pO tP oIn sN S 7 YO o UN TnIg NG G O S 7(.B..PY) o YO PiaT T Base PK laE te M o U N T I N (G ll BIraO ckeN t S WBO ) W a sle lBBracket B cthekee (nB (nW q (PL) Base Plate chP o)rsBsB up p iePdlPa bla yetoethers.) ((A cB hoB rs)W sWall uW pa pa llileld ba yra ok rst.) q (WB) a s e t r c t (((AB P ) W ) spepPliela B (W (AP nc)hoB rsasu d tbey others.) (AnB ch)orW s sua plplliB edrabc y koe thters.)
3.00” 3.00” 3.00” 3.00” 3.00” 3.00”
2.00" IPS tenon (2) 2.00" IPS 28.12” tenon (2) 2.00" IPS tenon (2) 2.00" IPS IPS tenon tenon28.12” (2) 2.00" (2) 2.00" IPS24.00” tenon (2) 28.12”
(*Please supply metal color chip (*Please supply color chip or supply RAL#metal for any ‘NS’ finish.) (*Please supply metal color chip (*Please metal or supplysupply RAL# for anycolor ‘NS’chip finish.) or or supply supply RAL# RAL# for for any any ‘NS’ ‘NS’ finish.) finish.) or supply RAL# for any ‘NS’ finish.)
2/12 2 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 701 MILLENNIUM BOULEVARD GREENVILLE, TEL 864.678.1000 FAX 864.678.1417 701 MILLENNIUM BOULEVARD GREENVILLE, SC SC 29607 29607 701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607 TEL864.678.1000 864.678.1000 FAX864.678.1417 864.678.1417 TEL FAX 1/09 www.sternerlighting.com TEL 864.678.1000 FAX 864.678.1417 1/09 www.sternerlighting.com TEL 864.678.1000 FAX 864.678.1417 1/09 www.sternerlighting.com 1/09 www.sternerlighting.com
