I3 ENGLISH1

1.chematic diagram of bed mount assembly . 2.Assembly the bearing and belt holder. 3.Structural components of bed mount assembly. 4.Y-axis belt tensioner. 5.Assemble the Y-axis motor. 6.Prepare two nuts to clamp the holder.

1.schematic diagram of frame assembly. 2.Assemble and fix the plate on holder. 3.The place to assembly LCD Screen. 4.Assemble X-axis components . 5.Assemble Z-axis motor. 6.Combine the X-axis with Z-axis as a structure. 7.Fix the top of Z-axis.

1.Diagram of the whole machine. 2.The method to fix the bracket with pedestal.

1.Fix the Y-axis belt holder. 2.Y-axis Idler. 3.Assemble the X-axis belt holder and spring. 4.4.Assemble the Z-axis limit switch. 5.Assemble the Y-axis limit switch. 6.Assemble the X-axis limit switch.

1.Diagram of heated bed assembly. 2.Adjust the spring and heated plate to work in parallel. 3.Assemble and fix the glass plate with binder clip.

If the motor reversal adjusted as shown in figure

Heated Build Plate HBP Thermistor

Extruder Thermistor L NG

Extruder Heater

COM COM

V+ V+

Power Supply

HBP Heater Fan

Z Y X

2 Z Axis Motors

Y Axis

X Axis

Extruder Axis

2 Z Axis Motors

1.Circuit Diagram. 2.Motors Wiring. 3.Power Supply Wiring. 4.Diagram of motors rotation.

https://goo.gl/GUPQbg

Y Axis

X Axis

Extruder Axis