ib450s500 rev nc ds rev c
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
UHF Radar Transistor
Silicon Bipolar − Ultra-high fT
The high power pulsed radar transistor device part number IB450S500 is designed for UHF radar systems operating at 450 MHz. While operating in class C mode this common base device supplies a minimum of 500 watts of peak pulse power under the conditions of 30µs pulse width and 10% duty cycle. All devices are 100% screened for large signal RF parameters. Excellent spectral stability into output mismatch over a broad input power range make it ideal for use in reliable high power solid state transmitters.
Class C Operation − High Efficiency Common Base Configuration − Single Power Supply Gold Metal − Maximum Reliability Emitter Ballasting − Optimum Thermal Distribution
TYPICAL DATA Conditions :
TYPICAL DATA Pulse: Duty: Vcc: Fixture: Lot:
TYPICAL DATA
TYPICAL DATA
30us 10% 40V ITI 447 2098
Be0 Package − Unmatched Thermal Reliability
VSWR
Lot/SN 2098-1
F(MHZ)
Po pk Pin pk Ic pk (A) RL (dB) Nc (%)
435 450 465
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 1/1
500 500 500
66.5 52.7 66.5
Internal Impedance Matching − Ease of Use − Ultra-low Loss Design
20.67 18.33 21.00
-17 -21 -11
60 68 60
G (dB)
1.5:1
3:1
8.8 9.8 8.8
S S S
P P P
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
RF Test Fixture − Matched to 50Ω − Long-term Correlation − 100% Device RF Screening − No External Tuning Allowed
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
MAXIMUM RATINGS Screen Parameter BD BD BD BD Note
Collector-Emitter Voltage Emitter-Base Voltage Storage Temperature Range Operating Junction Temperature Range
Note
Min
Max
Units
VCES VEBO TSTG TJ
---55 -55
80 3.5 +150 +200
V V °C °C
Symbol
Min
Max
Units
RTH(JC)
--
0.20
°C/W
Symbol
Min
Max
Units
------
------
------
------
Thermal Resistance
Test Conditions VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=500W, F=F1.
Screen 'BD' = parameter qualified By Design.
PROCESSING SPECIFICATIONS Screen Parameter 100% Q1 LM 100% 100%
DC Wafer Probe Wafer DC and RF Qualification Wire Bond Strength Pre-cap visual inspection Gross leak test
Note Note
Screen 'Q1' = parameter is qualified by assembly and test of 3 pieces minimum per wafer. Screen 'LM' = parameter is qualified by assembly line monitor.
DC ELECTRICAL CHARACTERISTICS Screen Parameter 100% 100% 100%
Test Conditions VBE=0V. ----
Screen 'BD' = parameter qualified By Design.
THERMAL CHARACTERISTICS Screen Parameter BD
Symbol
Collector-Emitter Breakdown Voltage Zero Base Voltage Collector Leakage Current DC Current Gain
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 2/1
Symbol
Min
Max
Units
BVCES ICES HFE
80 -10
-10.0 150
V mA --
Test Conditions Per Integra specification. Per Integra specification. Line monitor per Integra specification. Per Integra specification. MIL-STD-750D, Method 1071.6, Test Condition C.
Test Conditions IC=50mA, VBE=0V, TF=25±5°C. VCE=40V, VBE=0V, TF=25±5°C. VCE=5V, IC=0.5A, TF=25±5°C.
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF ELECTRICAL CHARACTERISTICS Screen Parameter 100% 100% 100% 100% 100%
Input Return Loss Input Power Power Gain Collector Efficiency (PO/IC/VCC) Pulse Amplitude Droop
100%
Stability into 1.5:1 VSWR
100%
3:1 Load Mismatch Tolerance
BD Note Note Note
Symbol
Min
Max
Units
IRL PIN GP NC D
10 -8.5 45 --
-70.6 --0.5
dB W dB % dB
VSWR-S
--
--
--
LMT
--
--
--
RT
--
150
ns
Pulse Risetime
Test Conditions VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Rotate 1.5:1 output VSWR through 360° phase. No oscillatory or pulse break-up characteristics allowed on detected output pulse. All non-harmonically related signals must be at least –65 dBc. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Rotate 3:1 output VSWR through 360° phase. Post-test POUT = Pre-test POUT ±10W. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Measure between 10% and 90% detected power points.
V1 = 40V; PW1 = 30µs; DF1 = 10%; POUT1 = 500W; F1 = 450 MHz. TF = Device flange temperature. Screen 'BD' = parameter qualified By Design.
RF TEST FIXTURE IMPEDANCE CHARACTERISTICS Frequency (MHz) 450
50 Ω
ZIF (Ω)
ZOF (Ω)
0.96 –j0.42
1.55 –j0.47
MATCHING CIRCUITRY
ZIF
ZOF
MATCHING CIRCUITRY
50 Ω
Impedance Definition
DUT
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 3/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
DUT
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
PACKAGE DIMENSIONAL OUTLINE DRAWING
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 4/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF TEST FIXTURE
C9 C8 L1 C3 C1
C2
L2
C5
C4 C7
C6 C10
ASSEMBLY AND PARTS LIST
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 5/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF TEST FIXTURE
CIRCUIT DIMENSIONS
ELECTRICAL SCHEMATIC
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 6/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
DEFINITIONS Data Sheet Status Proposed Specification Preliminary Specification Product Specification
This data sheet contains proposed specifications. This data sheet contains specifications based on preliminary measurements and data. This data sheet contains final product specifications.
Maximum Ratings Stress above one or more of the maximum ratings may cause permanent damage to the device. These are maximum ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. Exposure to maximum values for extended periods of time may affect device reliability.
WARNING Product and environmental safety - toxic materials This product contains beryllium oxide. The product is entirely safe provided that the BeO base is not damaged. All persons who handle, use or dispose of this product should be aware of its nature and of the necessary safety precautions. After use, dispose of as chemical or special waste according to the regulations applying at the location of the user. It must never be thrown out with general or domestic waste.
DISCLAIMER Integra Technologies Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Integra Technologies Inc. assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Integra Technologies Inc. products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Integra Technologies Inc. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Integra Technologies Inc. for any damages resulting from such improper use or sale.
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 7/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Integra
IB450S500
TECHNOLOGIES, INC.
UHF Radar Transistor
Silicon Bipolar − Ultra-high fT
The high power pulsed radar transistor device part number IB450S500 is designed for UHF radar systems operating at 450 MHz. While operating in class C mode this common base device supplies a minimum of 500 watts of peak pulse power under the conditions of 30µs pulse width and 10% duty cycle. All devices are 100% screened for large signal RF parameters. Excellent spectral stability into output mismatch over a broad input power range make it ideal for use in reliable high power solid state transmitters.
Class C Operation − High Efficiency Common Base Configuration − Single Power Supply Gold Metal − Maximum Reliability Emitter Ballasting − Optimum Thermal Distribution
TYPICAL DATA Conditions :
TYPICAL DATA Pulse: Duty: Vcc: Fixture: Lot:
TYPICAL DATA
TYPICAL DATA
30us 10% 40V ITI 447 2098
Be0 Package − Unmatched Thermal Reliability
VSWR
Lot/SN 2098-1
F(MHZ)
Po pk Pin pk Ic pk (A) RL (dB) Nc (%)
435 450 465
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 1/1
500 500 500
66.5 52.7 66.5
Internal Impedance Matching − Ease of Use − Ultra-low Loss Design
20.67 18.33 21.00
-17 -21 -11
60 68 60
G (dB)
1.5:1
3:1
8.8 9.8 8.8
S S S
P P P
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
RF Test Fixture − Matched to 50Ω − Long-term Correlation − 100% Device RF Screening − No External Tuning Allowed
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
MAXIMUM RATINGS Screen Parameter BD BD BD BD Note
Collector-Emitter Voltage Emitter-Base Voltage Storage Temperature Range Operating Junction Temperature Range
Note
Min
Max
Units
VCES VEBO TSTG TJ
---55 -55
80 3.5 +150 +200
V V °C °C
Symbol
Min
Max
Units
RTH(JC)
--
0.20
°C/W
Symbol
Min
Max
Units
------
------
------
------
Thermal Resistance
Test Conditions VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=500W, F=F1.
Screen 'BD' = parameter qualified By Design.
PROCESSING SPECIFICATIONS Screen Parameter 100% Q1 LM 100% 100%
DC Wafer Probe Wafer DC and RF Qualification Wire Bond Strength Pre-cap visual inspection Gross leak test
Note Note
Screen 'Q1' = parameter is qualified by assembly and test of 3 pieces minimum per wafer. Screen 'LM' = parameter is qualified by assembly line monitor.
DC ELECTRICAL CHARACTERISTICS Screen Parameter 100% 100% 100%
Test Conditions VBE=0V. ----
Screen 'BD' = parameter qualified By Design.
THERMAL CHARACTERISTICS Screen Parameter BD
Symbol
Collector-Emitter Breakdown Voltage Zero Base Voltage Collector Leakage Current DC Current Gain
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 2/1
Symbol
Min
Max
Units
BVCES ICES HFE
80 -10
-10.0 150
V mA --
Test Conditions Per Integra specification. Per Integra specification. Line monitor per Integra specification. Per Integra specification. MIL-STD-750D, Method 1071.6, Test Condition C.
Test Conditions IC=50mA, VBE=0V, TF=25±5°C. VCE=40V, VBE=0V, TF=25±5°C. VCE=5V, IC=0.5A, TF=25±5°C.
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF ELECTRICAL CHARACTERISTICS Screen Parameter 100% 100% 100% 100% 100%
Input Return Loss Input Power Power Gain Collector Efficiency (PO/IC/VCC) Pulse Amplitude Droop
100%
Stability into 1.5:1 VSWR
100%
3:1 Load Mismatch Tolerance
BD Note Note Note
Symbol
Min
Max
Units
IRL PIN GP NC D
10 -8.5 45 --
-70.6 --0.5
dB W dB % dB
VSWR-S
--
--
--
LMT
--
--
--
RT
--
150
ns
Pulse Risetime
Test Conditions VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Rotate 1.5:1 output VSWR through 360° phase. No oscillatory or pulse break-up characteristics allowed on detected output pulse. All non-harmonically related signals must be at least –65 dBc. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Rotate 3:1 output VSWR through 360° phase. Post-test POUT = Pre-test POUT ±10W. VCC=V1, PW=PW1, DF=DF1, TF=25±5°C, POUT=POUT1, F=F1. Measure between 10% and 90% detected power points.
V1 = 40V; PW1 = 30µs; DF1 = 10%; POUT1 = 500W; F1 = 450 MHz. TF = Device flange temperature. Screen 'BD' = parameter qualified By Design.
RF TEST FIXTURE IMPEDANCE CHARACTERISTICS Frequency (MHz) 450
50 Ω
ZIF (Ω)
ZOF (Ω)
0.96 –j0.42
1.55 –j0.47
MATCHING CIRCUITRY
ZIF
ZOF
MATCHING CIRCUITRY
50 Ω
Impedance Definition
DUT
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 3/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
DUT
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
PACKAGE DIMENSIONAL OUTLINE DRAWING
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 4/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF TEST FIXTURE
C9 C8 L1 C3 C1
C2
L2
C5
C4 C7
C6 C10
ASSEMBLY AND PARTS LIST
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 5/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
RF TEST FIXTURE
CIRCUIT DIMENSIONS
ELECTRICAL SCHEMATIC
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 6/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
Part Number:
Integra
IB450S500
TECHNOLOGIES, INC.
DEFINITIONS Data Sheet Status Proposed Specification Preliminary Specification Product Specification
This data sheet contains proposed specifications. This data sheet contains specifications based on preliminary measurements and data. This data sheet contains final product specifications.
Maximum Ratings Stress above one or more of the maximum ratings may cause permanent damage to the device. These are maximum ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. Exposure to maximum values for extended periods of time may affect device reliability.
WARNING Product and environmental safety - toxic materials This product contains beryllium oxide. The product is entirely safe provided that the BeO base is not damaged. All persons who handle, use or dispose of this product should be aware of its nature and of the necessary safety precautions. After use, dispose of as chemical or special waste according to the regulations applying at the location of the user. It must never be thrown out with general or domestic waste.
DISCLAIMER Integra Technologies Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Integra Technologies Inc. assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Integra Technologies Inc. products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Integra Technologies Inc. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Integra Technologies Inc. for any damages resulting from such improper use or sale.
IB450S500 PRODUCT SPECIFICATION FILE: IB450S500-REV-NC-DS-REV-C PAGE 7/1
WWW.INTEGRATECH.COM PHONE: 310-606-0855 FAX: 310-606-0865
INTEGRA TECHNOLOGIES, INC. 321 CORAL CIRCLE EL SEGUNDO, CA 90245-4620
