iBook G3 Clamshell LCD Bezel Replacement

iBook G3 Clamshell LCD Bezel Replacement

iBook G3 Clamshell LCD Bezel Replacement Replacing the bezel covering the Lcd

Written By: aidan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

iBook G3 Clamshell LCD Bezel Replacement

INTRODUCTION Replacing the bezel covering the Lcd

TOOLS: T8 Torx Screwdriver (1) Flathead Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

iBook G3 Clamshell LCD Bezel Replacement

Step 1 — Battery Cover 

Use a coin to unscrew the battery cover, and remove battery.

Step 2 — Back Cover



Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

iBook G3 Clamshell LCD Bezel Replacement

Step 3 

Open the screen, and remove the two t8 Torx screws holding the bezel in place.

Step 4



Use a flat tip screw driver to unsnap the bezel from its place.



When at the top rubberized area, pry the bezel down.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

iBook G3 Clamshell LCD Bezel Replacement This document was last generated on 2017-06-25 01:20:01 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5