IC-80 Tech Spec.qxd - ALL Crane

Report 3 Downloads 34 Views
Tech Spec

2-WHEEL DRIVE *

Capacity on outriggers...18,000 lbs.

*

Pick and carry capacity up to...11,700 lbs.

*

Height...7’ 3”

*

Width...6’ 6”

*

Sheave height...up to 46’

*

Horizontal Reach...up to 40’

*

Tight turning radius

*

2-Wheel drive standard

*

4-Wheel steer standard

*

4-Wheel drive optional

*

Powershift transmission

*

Fully hydraulic controls for smooth precise operations

*

Independent outrigger controls

IC-80-F

Tech Spec 4-Wheel Drive 4-Wheel Steer

*

Capacity on outriggers...18,000 lbs.

*

Pick and carry capacity up to...11,700 lbs.

*

Height...7’ 3”

*

Width...6’ 6”

*

Sheave height...up to 46’

*

Horizontal Reach...up to 40’

*

Tight turning radius...11’ 8”

*

4-Speed synchromesh transmission

*

Independent outrigger controls

*

4-Wheel hydraulic internal wet disc brakes

IC-80-1F IC−80−1F 8’−2" − 20’−2" BOOM CAPACITIES APPLY TO OPERATION ON FIRM LEVEL SURFACE MAIN BOOM OR EXTENSION CAPACITIES IN POUNDS 360 oROTATION OVER FRONT RADIUS FEET

ON RUBBER

ON OUTRIGGERS

ON RUBBER

ON OUTRIGGERS

5 6 8 10 12 14 16 18 20 22 24 26 28 30

9600 7900 5750 4150 3100 2425 1975 1625 1400 1275 1075 925 775 675

17000 14500 10250 7700 6550 5550 4650 3950 3550 3000 2750 2450 2150 1950

11700 10400 8400 6300 4650 3650 3000 2500 2150 1900 1650 1425 1250 1100

18000 14500 10250 7700 6550 5550 4650 4150 3800 3000 2800 2600 2400 2250

28'-2"

22'-6" 70°

0 15

1 0' B O O M E X T.

MAIN BOOM

LOAD

30 45

60 70

16'-11"

1'-4 3/4"

10-FOOT BOOM EXTENSION - STRAIGHT OR OFFSET MAIN BOOM ANGLE

BOOM EXTENSION

0° 2250

ANGLE

* 0°

30° 2600 2400 2250

---

15° 30°

---

45° 3200 2700 2500

60° 5000 3500 3000

70° 7000 4200 3300 11 1/2"

* USE 0° FOR STRAIGHT BOOM EXTENSION. USE 0°, 15° OR 30° FOR OFFSET BOOM EXTENSION. BOOM EXTENSION LOADS MUST NOT EXCEED MAIN BOOM CAPACITY.

3 7/16"

11'-7 1/2"

36

USE SINGLE PART LOAD LINE FOR LOADS TO 9000 LBS. (WT. 90LBS.)

41

5'-9 1/2"

USE TWO PART LOADLINE FOR LOADS TO 18000 LBS. (WT. 124LBS.)

5'-10"

57 1/8" 9'-7" 6'-6"

70

o

37' 36'

60

o

34'

18 1/2" 12"

32'

45

30'

o

9"

28' 26'

30

24'

o

C L LOAD

22'

CL ROTATION

26 3/4"

20'-2" EXTENDED

8'-2" RETRACTED 60

70

20'

45

18'

30

0

15

16'

15

o

7'-3"

14'

5'-8 3/4"

12'

3'-5" 22°

10' 8' 6' 10" CL

4'

6'

8' 10' 12' 14' 16' 18' 20' 22' 24' 26' 28' 30'

RADIUS IN FEET FROM C ROTATION TO LOAD L

0

21°

o

3'-6 3/4" 3'-0 1/4" 1'-7"

7'-0 3/4" 12'-9 1/2"

2'-8 1/2"

IC-80-2F IC-80-2F 9'-6" - 24'-0" BOOM CAPACITIES APPLY TO OPERATION ON FIRM LEVEL SURFACE MAIN BOOM OR EXTENSION CAPACITIES IN POUNDS 360 oROTATION OVER FRONT RADIUS LOAD

ON RUBBER

5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34

9500 7800 5500 3900 2900 2300 1850 1550 1300 1100 925 850 700 600 500 425

ON RUBBER

ON OUTRIGGERS

11600 10200 8250 6200 4550 3550 2850 2400 2050 1750 1550 1350 1175 1025 900 800

18000 14500 10250 7700 6550 5550 4550 4050 3650 3300 3100 2750 2500 2300 2100 1950

17000 14500 10250 7700 6550 5550 4550 3950 3250 2875 2475 2250 2000 1775 1625 1400

31'-9"

25'-0"

10-FOOT BOOM EXTENSION - STRAIGHT OR OFFSET MAIN BOOM ANGLE

BOOM

0° 2250

ANGLE

0° 15° 30°

-----

30° 2600 2400 2250

45° 3200 2700 2500

60° 5000 3500 3000

70°

15

EXTENSION

*

ON OUTRIGGERS

0

1 0' B O O M E X T.

MAIN BOOM

FEET

3

0 45

18'-2"

60

70

70° 7000 4200 3300

1'-4 3/4"

* USE 0° FOR STRAIGHT BOOM EXTENSION. USE 0°, 15° OR 30° FOR OFFSET BOOM EXTENSION. BOOM EXTENSION LOADS MUST NOT EXCEED MAIN BOOM CAPACITY.

5'-10 3/4"

11 1/2"

36

USE SINGLE PART LOAD LINE FOR LOADS TO 9000 LBS. (WT. 90LBS.)

41

USE TWO PART LOADLINE FOR LOADS TO 18000 LBS. (WT. 124LBS.)

3 7/16"

11'-7 1/2" 5'-9 1/2"

70

40' 10" 40'

o

60

38'

5'-10"

57 1/8"

o

6'-6"

36'

45

34'

9'-7"

o

32' 18 1/2"

30'

12"

28'

9"

26'

30

24'

o

CL ROTATION

C L LOAD

22'

24'-0" EXTENDED 9'-6" RETRACTED

26 3/4"

4

5

60

70

20'

30

0

18'

15

16'

15

o

7'-3" 5'-8 3/4"

14' 12'

3'-5" 22 °

10' 8' 6' 10" CL

4' 6' 8' 10' 12' 14' 16' 18' 20' 22' 24' 26' 28' 30' 32' 34' RADIUS IN FEET FROM C LROTATION TO LOAD

0

21 °

o

3'-6 3/4" 3'-0 1/4" 2'-11"

7'-0 3/4" 12'-9 1/2"

2'-8 1/2"

IC-80-3F IC-80-3F 11'-6" - 30'-0" BOOM CAPACITIES APPLY TO OPERATION ON FIRM LEVEL SURFACE LOAD MAIN BOOM OR EXTENSION CAPACITIES IN POUNDS RADIUS OVER FRONT 360 oROTATION ON RUBBER

5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

9400 7550 5250 3600 2650 2050 1600 1250 1050 850 750 650 550 450 350 250 200 150 100

ON OUTRIGGERS

17000 14000 10000 7700 6100 5200 4400 3650 3050 2650 2300 2050 1850 1650 1550 1400 1250 1100 1000

ON RUBBER

ON OUTRIGGERS

11400 10000 8100 6100 4450 3400 2700 2200 1800 1550 1350 1150 1000 900 750 650 550 450 400

18000 14000 10000 7700 6100 5200 4400 3900 3400 3050 2800 2550 2350 2150 1950 1800 1650 1500 1400

37'-5"

28'-9"

10-FOOT BOOM EXTENSION - STRAIGHT OR OFFSET MAIN BOOM ANGLE

BOOM EXTENSION

-----

30°

30° 2600 2400 2250

45° 3200 2700 2500

60° 5000 3500 3000

70° 7000 4200 3300

20'-0"

70 °

15

0° 2250

ANGLE

* 0° 15°

0

1 0' B O O M E X T.

MAIN BOOM

FEET

30

45 06

70

1'-4 3/4"

* USE 0° FOR STRAIGHT BOOM EXTENSION. USE 0°, 15° OR 30° FOR OFFSET BOOM EXTENSION. BOOM EXTENSION LOADS MUST NOT EXCEED MAIN BOOM CAPACITY. 5'-10 3/4"

36

USE SINGLE PART LOAD LINE FOR LOADS TO 9000 LBS. (WT. 90LBS.)

41

USE TWO PART LOADLINE FOR LOADS TO 18000 LBS. (WT. 124LBS.)

11 1/2" 3 7/16"

11'-7 1/2"

70

46' 4" 46'

o

5'-9 1/2"

60

44'

5'-10"

o

57 1/8"

42' 40' 38'

45

6'-6"

o

9'-7"

36' 34'

18 1/2"

32' 30'

12" 9"

30

o

28' 26'

C L ROTATION

C L LOAD

24'

30'-0" EXTENDED 11'-6" RETRACTED

22'

26 3/4"

70

20' 60

o

45

15

18'

30

0

51

7'-3" 5'-8 3/4"

16' 14' 12'

3'-5" 22 °

10' 8' 6' 10" CL

4' 6' 8' 10' 12' 14' 16' 18' 20' 22' 24' 26' 28' 30' 32' 34' 36' 38' 40' RADIUS IN FEET FROM C L ROTATION TO LOAD

0

21 ° 3'-6 3/4"

o

3'-0 1/4" 4'-11"

7'-0 3/4" 12'-9 1/2"

2'-8 1/2"

IC-80-F GENERAL: Weight: 4-Wheel Steer 4-Wheel Drive

TRANSMISSION: (Cont’d) IC-80-1F

IC-80-2F

IC-80-3F

15,730 lbs. 16,430 lbs.

15,930 lbs. 16,630 lbs.

16,230 lbs. 16,930 lbs.

Boom Movement: Rotation Elevation Extension

Continuous Continuous Continuous 0º to 70º 0º to 70º 0º to 70º 12 ft. 14 ft. 6 in. 18 ft. 6 in.

Boom Speeds: Rotation Elevation Extension

Turning Radius: (C/L of Outside Steering Wheel)

4-Wheel Drive: Remote mounted synchromesh 4-speed. Forward, neutral and reverse control mounted on steering column. 4-speed control has side lever & push

button knob for electric declutching. Can be shifted while in motion. Equipped with oil cooler and filter. Torque converter has stall ratio of 2.2:1. Gradeability 72 percent.

2.0 RPM 10.0 sec. 17.0 sec.

2.0 RPM 10.0 sec. 21.0 sec.

Standard 4-Wheel Steer

Aisle Width for 90º Turn:

2.0 RPM 10.0 sec. 27.0 sec.

Optional 4-Wheel Drive

10 ft. 9 in.

11 ft. 8 in.

9 ft. 7 in.

9 ft. 9 in.

ENGINE: Make Model Type No. Cyl. Displacement HP @ Gov. Speed

Standard

Optional

GM 3.0 EFI* Gas 4 181 CID 69

Cummins 4B3.9 Diesel 4 239 CID 80

Fuel Tank Capacity:

20 Gallons * Electronic Fuel Injection with Dual Fuel

TRANSMISSION: 2-Wheel Drive: Powershift transmission with 4-speeds in forward and reverse. Provides powershifts at any engine speed in any gear. All shifting is done with a single lever electrical control mounted on the steering column. Multiple-disc clutch packs operated by solenoid valve provide forward, neutral, reverse & speed selection. Equipped with oil cooler and filter. Torque converter has stall ratio of 2.2:1.

Gradeability 70 percent. Forward/Reverse Gear Ratios Gear First 5.72:1 Second 3.23:1 Third 1.77:1 Fourth 1.00:1

Travel Speed 4 MPH 7 MPH 12 MPH 22 MPH

Drawbar Pull 10,900 lbs. 6,090 lbs. 3,270 lbs. 1,780 lbs.

Gear

Forward/Reverse Gear Ratios

First Second Third Fourth

4.29:1 2.66:1 1.41:1 0.77:1

Travel Speed

Drawbar Pull

5 MPH 8 MPH 15 MPH 27 MPH

11,500 lbs. 7,070 lbs. 3,670 lbs. 1,930 lbs.

AXLES: Front: Planetary drive/steer axle with 11.98:1 ratio. Differential is “Limited Slip.” Axle mounted rigidly to frame. Rear: 2-Wheel Drive: Axle with 1-1/2 degree oscillation in either direction. 4-Wheel Drive: Planetary drive/steer axle with 11.98:1 ratio. Differential is “Limited Slip.” 1-1/2 degree oscillation in either direction.

STEERING: Hydraulic steering unit with two cylinders attached to each axle. Rear axle is the primary steer. An electric switch in the operator’s compartment is used to select rear-wheel steering or four-wheel round steering.

BRAKES: Front

2-Wheel Drive Internal wet disc brakes

4-Wheel Drive Internal wet disc brakes

Rear

Drum type

Internal wet disc brakes

Parking

Disc type

Disc type

TIRES: 2-Wheel Drive 10.00 x 15, load range J radial, highway type tread. 4-Wheel Drive 10.00 X 15, mining & industrial, 16 ply rating.

Tech Spec CHASSIS: Cargo Deck: 64 square feet of deck area.* 14,000 lbs. capacity on deck when load is centered over or between axles.** A storage box is located in front cargo deck. Steps located on front corners. * 54 Square feet with Cummins engine. **14,000 pounds allowed at creep speed of 200 feet in 30 minutes. Outriggers: Four hydraulic outriggers of box beam construction with direct-connected holding valves. Independent controls for each outrigger. Each cylinder equipped with direct-connected holding valves. Outrigger pad dimension 9” x 12”. Accessory Storage Box: Storage box located in front cargo deck. Lifting Rings Lifting rings at each corner of cargo deck so sling can be attached for lifting crane.

OPERATOR COMPARTMENT: Operator’s control station provides one-position access to all operating functions. Includes adjustable operator’s seat, retracting seat belt, fire extinguisher and bubble level.

ELECTRICAL: 12 Volt System

ELECTRICAL: (Cont’d) Back-Up Alarm: Provides pulsating sound from 97 dB alarm when transmission is in reverse. Conforms to SAE J994b. Outrigger Alarm System Two-tone alarm is activated when “outrigger down” controls are operated. HYDRAULIC SYSTEM: Tandem pump, direct-driven by engine crankshaft, rated at 17 & 32 GPM at rated RPM. Hydraulic oil tank capacity of 22 gallons. BOOM ASSEMBLY: Three-section boom assembly equipped with bearing pads, double-acting hydraulic cylinders with direct-connected holding valves & boom angle indicator on each side of boom. Boom Rotation: Heavy-duty ball bearing rotation gear with external teeth. Rotation is powered by hydraulic motor and worm gear drive. Boom Hoist: Turret mounted planetary gear hoist hydraulically powered with a bare drum line pull of 10,000 lbs. at a line speed of 110 FPM. Includes downhaul weight, swivel hook & sheave block for 2-part line and 125 ft. of 9/16” hoist rope.

Instrument Package: Fuel, ammeter, oil pressure, water temperature, transmission oil temperature gauges & hourmeter. Also included are warning lights for low transmission pressure, turn signal, high beams, hazard lights, parking brake & 4-wheel drive.

Anti-Two-Block Device: Prevents damage to hoist rope and/or crane components from pulling load hook against tip.

Lighting Package: One pair headlights with Hi and Low beams, back-up lights, integral tail, brake, front and rear turn signals & emergency flasher switch at operator’s station. 12V horn actuated by button on shifting control.

Rated Capacity Limiter: Warns operator of impending overload with audible and visual signals. Prevents overload by stopping boom functions that cause overloads.

Sheave Block, Two-Part: Single sheave block for 2-part line requirements.

IC-80-F Listed below are brief descriptions of each option available for the IC-80-F Industrial Cranes. Consult the IC-80-F Engineering Spec for additional information on each option. MODELS: IC-80-1F Industrial Crane with 8’2”-20’2” Boom IC-80-2F Industrial Crane with 9’6”-24’ Boom IC-80-3F Industrial Crane with 11’6”-30’ Boom

CHASSIS OPTIONS: (Cont’d) Pintle Hook: Pintle Hook, Rear Pintle Hook, Front Headlight and Taillight Grilles Welded steel protective grilles for headlights and taillights. Rear Work Light Grilles Protective grilles for worklights. Rearview Mirrors One mounted on right-hand deck stake & one mounted on left-hand deck stake.

ENGINE: Diesel Engine Cummins - 4B3.9 Spark Arrester Muffler Installed in addition to std. muffler. Catalytic Converter OPERATOR COMPARTMENT Reduces engine emissions. OPTIONS: Engine Heater Operator Guard Engine coolant heater installed to Tubular steel weldment with heavy circulate warm water through expanded steel mesh top section. engine. Plugs into 120 volt AC. Operator Guard Cover Ether Injection System Clear vinyl cover which goes over Ether starting aid controlled by Operator Guard, for inclement switch in operator compartment and weather operations. injects ether directly into intake Operator Guard Door manifold. Hinged door covers operator comEngine Shut Down Gauges partment side opening. Shuts engine off when high water All-Weather Cab temperature or low engine oil presRigid-mounted canopy section & sure occurs. (Diesel Only) removable hinged door. Includes AXLE & STEERING OPTIONS: heater, electric windshield wiper, 4-Wheel Steer & 4-Wheel Drive one sliding glass window in the door TIRE OPTIONS: & one in the right side of canopy. Mining & Industrial Tires Defroster fan & dome light included. 10.00 x 15 , 16-Ply Rating Cab Heater 10.00 x 15, Non Marking Heater with two-speed fan for units Solid Rubber Tires: without All Weather Cab. 8.25 x 15 Windshield Washer 8.25 x 15 Non-Marking Includes reservoir pump and nozzle. Foam Filling of Tires Floor Mat Spare Tire & Wheel Vinyl mat with foam backing. Highway Tread, 10.00 x 15 Operator Suspension Seat Mining & Industrial, 10.00 x 15 Provides additional operator comMining & Industrial, Non Marking fort. Noise Reduction Kit CHASSIS OPTIONS: Includes floor mat, control valve and Auxiliary Winch side panels of foam backed vinyl for Mounted behind front bumper, noise reduction. hydraulically driven with control in Air Conditioning operator’s console. Air Conditioner with R134 coolant.

Copyright 2003 Broderson Manufacturing Corp.

ELECTRICAL OPTIONS: Strobe Lights Yellow strobe light mounted on each side of turret weight box. Amber Rotating Beacons Amber rotating beacon mounted on each side of turret weight box. Boom Work Lights One work light mounted to boom to light boom tip and one work light mounted to turret to light ground under boom tip. Work Lights-Rear Two work lights recessed in rear bumper. BOOM ATTACHMENTS: Boom Extension, 10 Foot Boom stowable. Boom Extension, 10 Foot, Offsettable Same as above item, except the boom extension is offsettable to 3 different positions; 0 degrees (inline), 15 degrees and 30 degrees offset. Searcher Hook: Nose Mount

Should you, as an end user, require an option or special equipment on your IC-80-F that is not listed on our sales literature, please contact your dealer salesperson or the factory to receive a special quoted price.

Specifications Subject to Change

Form #CC103F (12/02)