Icon TV Stand 9429 - BDI
assembly instructions
Icon
®
94 2 9 Component List
Arm x 2 Glass Top x 1 Back Panel x 1 Shelf Brackets x 4 Front Frame x 1 Glass Shelves x 2 Base x 1
Ax9
Bx6
C x 13 Dx2
bdiusa.com
[email protected]
Your Icon® Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Icon® Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Step 1 Unpack and Identify Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a nonmarring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Step 2 Install Arms Bracket mounting holes should face inward.
E x 12
Fx6
Gx1 Dx2 Hx1 G Ix2 Jx2
Kx5 Lx5
Step 3 Install Levelers and Frame to Base Install Levelers (F) to bottom of Base. Adjust Levelers (F) so base is level and stable. Use shown hardware to attach Base to Frame. DO NOT FULLY TIGHTEN “I” SCREWS, as leaving them loose will facilitate installation of Glass Shelves and Glass Top.
Jx2
Fx8
Ix2 H
Ax2 Designed by Cristian Wicha & Bill Becker. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. “Icon” and BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2010, BDI Made in Taiwan. 9429REV03112010v2
G
1
Note: Base is easiest to install if unit is rested on it’s BACK.
Step 4 Install Back Panel and Wire Managements Straps Back Panel is to be installed with small holes facing backward. DO NOT FULLY TIGHTEN “E” SCREWS, as leaving them loose will facilitate installation of Glass Shelves and Glass Top. BDI label should be on bottom left corner of Back Panel. Velcro straps are supplied to control cables. They can be screwed into the steel at top and bottom of the arm or into the small holes on the Back Panel. Ex4
H
K L
Step 5 Install the Shelf Brackets Shelf Brackets can be adjusted to offer three different shelf positions. Note: To reposition Shelf Brackets, it is not necessary to remove the Back Panel.
Shelf Brackets x 4 E
E
H
2
assembly instructions bdiusa.com [email protected]
Step 5 Install Glass Shelves Two person assembly is recommended for this step. Use appropriate hardware. Apply Felt Washers to the stainless pucks prior to glass installation. PLEASE READ: Leave glass screws loose until all screws have been installed. Then tighten securely. It may be nexessary to lossen Shelf Brackets to obtain proper fit. Shifting the Arms and Back Panel as needed to obtain proper fit may also be necessary. Once Glass Shelves and Top Glass are fitted, PLEASE BE CERTAIN TO GO BACK AND TIGHTEN ALL SCREWS. Top Glass Ax3 Bx2 Cx5
Shelf Glass Bx4 Cx4
Bottom Shelf Glass Ax4 Cx4
3
assembly instructions bdiusa.com [email protected]
i m p o r ta n t
Icon
notice
®
94 2 4 & 9 4 2 9
bdiusa.com
[email protected]
Icon Models 9424 & 9429 are engineered specifically for Flat Panel Plasma and LCD TVs. If a micro-display rear projection TV is used, the TV must be positioned as far back as possible while still being fully supported by the glass. Minimum 3” (75 mm) from front edge of glass. Consult BDI’s website (www.bdiusa.com) or sales brochure for recommended TV sizes.
INCORRECT
INCORRECT Do not position a Flat Panel TV such that the screen on the front side of the steel frame.
steel frame
CORRECT
Position the Flat Panel TV so that the screen is positioned behind the steel frame.
A Rear Projection TV must be positioned a minimum of 3” from front edge oof glass while not hanging over the rear of the unit.
CENTER LINE
CORRECT
Minimum o f 3"
steel frame
Footprint of TV must not overhang the glass
4
Icon
®
94 2 9 Component List
Arm x 2 Glass Top x 1 Back Panel x 1 Shelf Brackets x 4 Front Frame x 1 Glass Shelves x 2 Base x 1
Ax9
Bx6
C x 13 Dx2
bdiusa.com
[email protected]
Your Icon® Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Icon® Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Step 1 Unpack and Identify Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a nonmarring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer. Step 2 Install Arms Bracket mounting holes should face inward.
E x 12
Fx6
Gx1 Dx2 Hx1 G Ix2 Jx2
Kx5 Lx5
Step 3 Install Levelers and Frame to Base Install Levelers (F) to bottom of Base. Adjust Levelers (F) so base is level and stable. Use shown hardware to attach Base to Frame. DO NOT FULLY TIGHTEN “I” SCREWS, as leaving them loose will facilitate installation of Glass Shelves and Glass Top.
Jx2
Fx8
Ix2 H
Ax2 Designed by Cristian Wicha & Bill Becker. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. “Icon” and BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2010, BDI Made in Taiwan. 9429REV03112010v2
G
1
Note: Base is easiest to install if unit is rested on it’s BACK.
Step 4 Install Back Panel and Wire Managements Straps Back Panel is to be installed with small holes facing backward. DO NOT FULLY TIGHTEN “E” SCREWS, as leaving them loose will facilitate installation of Glass Shelves and Glass Top. BDI label should be on bottom left corner of Back Panel. Velcro straps are supplied to control cables. They can be screwed into the steel at top and bottom of the arm or into the small holes on the Back Panel. Ex4
H
K L
Step 5 Install the Shelf Brackets Shelf Brackets can be adjusted to offer three different shelf positions. Note: To reposition Shelf Brackets, it is not necessary to remove the Back Panel.
Shelf Brackets x 4 E
E
H
2
assembly instructions bdiusa.com [email protected]
Step 5 Install Glass Shelves Two person assembly is recommended for this step. Use appropriate hardware. Apply Felt Washers to the stainless pucks prior to glass installation. PLEASE READ: Leave glass screws loose until all screws have been installed. Then tighten securely. It may be nexessary to lossen Shelf Brackets to obtain proper fit. Shifting the Arms and Back Panel as needed to obtain proper fit may also be necessary. Once Glass Shelves and Top Glass are fitted, PLEASE BE CERTAIN TO GO BACK AND TIGHTEN ALL SCREWS. Top Glass Ax3 Bx2 Cx5
Shelf Glass Bx4 Cx4
Bottom Shelf Glass Ax4 Cx4
3
assembly instructions bdiusa.com [email protected]
i m p o r ta n t
Icon
notice
®
94 2 4 & 9 4 2 9
bdiusa.com
[email protected]
Icon Models 9424 & 9429 are engineered specifically for Flat Panel Plasma and LCD TVs. If a micro-display rear projection TV is used, the TV must be positioned as far back as possible while still being fully supported by the glass. Minimum 3” (75 mm) from front edge of glass. Consult BDI’s website (www.bdiusa.com) or sales brochure for recommended TV sizes.
INCORRECT
INCORRECT Do not position a Flat Panel TV such that the screen on the front side of the steel frame.
steel frame
CORRECT
Position the Flat Panel TV so that the screen is positioned behind the steel frame.
A Rear Projection TV must be positioned a minimum of 3” from front edge oof glass while not hanging over the rear of the unit.
CENTER LINE
CORRECT
Minimum o f 3"
steel frame
Footprint of TV must not overhang the glass
4
