iHome iD95 Backup Battery Replacement

iHome iD95 Backup Battery Replacement

iHome iD95 Backup Battery Replacement This guide will help you take out the backup battery in your iD95.

Written By: Vincent Chan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

iHome iD95 Backup Battery Replacement

INTRODUCTION Use this guide to replace a dead backup battery or remove it to prevent unwanted alarm beeping.

TOOLS: Phillips #1 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

iHome iD95 Backup Battery Replacement

Step 1 — Backup Battery 

Before taking apart the iD95, disconnect the AC cord from the wall socket and AC adapter from the DC jack. Remove any iPods, iPhones, and iPads attached to the device.



Flip over the iD95 so the bottom cover is visible and the LCD screen is facing you.



Remove the 10 mm-length, 5 mmhead screw using a Phillips #1 screwdriver.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

iHome iD95 Backup Battery Replacement

Step 3 

Use a plastic opening tool to take out the backup battery.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 03:13:11 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4