In-Line Circulators - BlueRidge Company
Water Circulation Pumps & Circulators
In-Line Circulators Taco In-Line Circulators are designed to efficiently circulate heated or chilled water in residential or light commercial Hydronic Systems. These circulators may also be used for zoning large installations and are available in bronze or stainless steel construction for domestic hot water applications. In-Line Circulators demonstrate proven performance, dependablity, quiet operation and long lasting performance.
NSF® ≤ .25% Lead Stainless Steel Models Meet California AB 1953 and Vermont Act 193
©Taco Catalog #100-1.2 Supersedes: 04/19/12
Effective Date: 02/26/13 Printed in USA
Submittal Data # 101-155 Supersedes: New
110 Series In-Line Circulators
Effective: 02/01/13
110 Series (110, 111, 112, 113, 120) Red Baron Circulators: Rugged Motor Built to Last • Resilient mounted, split phase motor with built-in overload protector • Equipped with sleeve bearings for quiet operation
3
FLOW (M /H)
Proven Pump Construction • One piece non-ferrous impeller • Stainless steel shaft • Rugged bronze sleeve bearing • Two piece carbon/ceramic seal assembly • Durable one piece spring coupling
TOTAL HEAD (METERS)
TOTAL HEAD (FEET)
Factory Tested • Every circulator is operated before shipment
FLOW (GPM)
Easy, Low-Cost Service • No special tools required • Nationwide parts availability
A
Accessories & Options • Circulators available in: - Stainless Steel (110 thru 120 models) ® • Companion flanges available in: 3⁄4”, 1”, 1-1⁄4”, 1-1⁄2” sizes ® • Shut-off flanges available in: 3⁄4”, 1”, 1-1⁄4” and 1-1/2” sizes • Allows easy isolation and service
B
C
D
Specifications MODEL NUMBER (1)
FLANGE SIZE
MOTOR (2) (115V/60 HZ/1 PH) MAXIMUM TEMP. (3) HP RPM
⁄
⁄
⁄
⁄
⁄ ⁄
⁄
⁄
APPROX. SHIPPING WEIGHT
DIMENSIONS PRESSURE RATING
A IN.
B MM
IN.
C MM
IN.
D MM
IN.
MM LBS. KG
⁄ ⁄
⁄
⁄
⁄ ⁄ ⁄
⁄
⁄ ⁄
⁄
⁄
⁄
⁄ ⁄
⁄ ⁄ ⁄
“” –
121-138 Series In-Line Circulators 121-138 In-Line Cartridge Design Pump Series: Applications Designed to efficiently circulate heated or chilled water in large residential and commercial Hydronic Systems. Ideal for primary-secondary systems, as well as parallel pumping designs. Available in bronze construction for fresh water service.
Features Proven Performance: In-Line Cartridge Design Pumps are backed by years of Taco experience in design and manufacture of circulators. Hundreds of thousands are in service. Dependable, Quiet Operation: In-Line Cartridge Design Pumps offer quiet dependable pumping power and long lasting performance. Ideal for heating and/or air conditioning systems requiring high head performance, pressure boosting, and recirculation systems with relatively low volume. Unique Cartridge Design: Replaceable “cooler running” bearing cartridge extends bearing life. With permanently sealed grease lubricated ball bearings it is virtually maintenance free.
Built to Last Cartridge Bearing Assembly Cartridge design isolates the bearings from the effects of system fluid temperatures which greatly extends bearing life. • Alloy steel shaft • Cupro-Nickel shaft sleeve
Drive Coupling • Rugged flexible rubber construction absorbs angular and parallel misalignmen Rugged Motor • Available in single and three phase, and all standard voltages ...open-drip proof enclosure
• Equipped with sleeve Mechanical Seal bearings for quiet operation • Two piece carbon/ceramic • Resilient mounted seal is standard • Sealide-C/viton available for high • Built-in overload protector on single phase models temperature and aggressive water applications
Body & Flanges • Available in cast iron or bronze • In-Line configuration • Companion flanges provided in 2-1⁄2” or 3”
Factory Tested • Every pump is built to Hydraulic Institute standards and operated before shipment Easy Low-Cost Service • No special tools required
• One cartridge bearing assembly fits all models – replace cartridge only . . . not bracket Impeller • One mechanical seal • Dynamically and fits all models hydraulically balanced • Enclosed type – cast iron or bronze
E
Submittal Data Information 121-138 Series Circulators
15
A B
5
10
15
20
25
30
30
35 133
12
C
TOTAL HEAD – FEET
138
D
133
30
132
20
10
121-138
0
121-138
C
10
40
8
D
0
60
121/122
80
100
20
40
120
140
602
18 ⁄8 1 1
1
10 8 6 4
131
2 80
B
100
120
C MM
B
140
160
IN.
SHIPPING WEIGHT
D
LBS.
KG
403.2 141⁄4 362.0 111⁄8 282.6
MM
IN.
MM
72
32.7
403.2 135⁄8 346.1 111⁄8 282.6
72
32.7
400.1
16
406.4 135⁄8 346.1
95
43.1
457.2
16
406.4 135⁄8 346.1
108
49.0
473.1
16
406.4 135⁄8 346.1
113
51.3
485.8
16
406.4 135⁄8 346.1
118
53.5
When specifying bronze fitted construction, add letter “C” after model number (i.e. 132C)
construction, add letter “B” afterare model number (i.e. 132B). (2) Motors available with other electrical characteristics – consult your Taco representative. ted construction, add letter “C” after model number (i.e. 132C) ther electrical characteristics – consult your Taco representative.
175 150 125
C
D
100
0
100 200 TEMPERATURE (˚F)
40
5
FLOW M 3 /H 10
15
20
175 150 125 100
121-138
0
300
25
30
35
10
133
30
8 132
20
6 4
131
10
121/122
100 200 0 TEMPERATURE20 (˚F)
2
300 40
60
80
100
120
140
160
FLOW G P M
DIMENSIONS
(2)
MODEL (1) NUMBER
FLANGE SIZE
121
21⁄2"
1
122
3"
1
131
3"
1
MOTOR 60C/AC
1 PH
A RPM
IN.
B MM
IN.
C MM
IN.
SHIPPING WEIGHT
D
LBS.
KG
⁄4 HP, 115 V
1725
181⁄8 460.4 157⁄8 403.2 141⁄4 362.0 111⁄8 282.6
72
32.7
⁄4 HP, 115 V
1725
181⁄8 460.4 157⁄8 403.2 135⁄8 346.1 111⁄8 282.6
72
32.7
⁄3 HP, 115 V
1725
191⁄4 489.0 153⁄4 400.1
95
43.1
16
MM
IN.
MM
406.4 135⁄8 346.1
1 ⁄2 HP, 115/230 V Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360 Taco Inc., 1160 Cranston Street. 211⁄2 546.1 18 457.2 16 406.4 135⁄8 346.1 108 49.0 132 1725 or 230/460/60/3 Taco (Canada)3"Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436 or 200/60/3 3 ⁄4 HP, 115/230 V www.taco-hvac.com
133
3"
12
138 TOTAL HEAD – FEET
A B
200 SYSTEM PRESSURE (PSI)
SYSTEM PRESSURE (PSI)
200
PRESSURE – TEMPERATURE RATINGS
or 230/460/60/3 or 200/60/3 1 HP, 115/230 V
1725
221⁄8 562.0 185⁄8 473.1
16
406.4 135⁄8 346.1
113
51.3
TOTAL HEAD – METERS
PRESSURE – TEMPERATURE RATINGS
12
138
DIMENSIONS A
⁄3 HP, 115 19 ⁄4 132V 3" 1725 ⁄2 HP, 115/230 V 211⁄2 1725 or 230/460/60/3 or 200/60/3 3" 133 3 ⁄4 HP, 115/230 V 221⁄8 1725 or 230/460/60/3 or 200/60/3 3" 138 1 HP, 115/230 V 225⁄8 1725 or 230/460/60/3 When specifying all bronze construction, add letter “B” after model number (i.e. 132B). or (1) 200/60/3 1
35
FLOW GP M 121-138
DIMENSIONS SHIPPING 1 PH RPM IN. MM IN. WEIGHT C D 1 1 7 ⁄4 HP, 115 V 18 ⁄ ⁄8 15 1725 8 460.4 MM IN. MM IN. MM IN. MM LBS. KG 1 1 7 ⁄4 HP, 115 V 18 ⁄8 460.4 15 ⁄8 1725 460.4 157⁄8 403.2 141⁄4 362.0 111⁄8 282.6 72 32.7 1 ⁄3 HP, 115 V 1725 1 191⁄4 489.0 153⁄4 7 5 15 ⁄8 403.2 13 ⁄8 346.1 11 ⁄8 282.6 72 460.4 32.7 1 ⁄2 HP, 115/230 V 5 ⁄ 153⁄4 400.1 16 406.4 13 489.0 346.1 95 43.1 1 8 21 ⁄2 546.1 18 1725 or 230/460/60/3 or 200/60/3 18 457.2 16 406.4 135⁄8 346.1 108 49.0 3546.1 ⁄4 HP, 115/230 V 221⁄8 562.0 185⁄8 1725 or 230/460/60/3 or 200/60/3 562.0 185⁄8 473.1 16 406.4 135⁄8 346.1 113 51.3 1 HP, 115/230 V 225⁄8 574.0 191⁄8 1725 or 230/460/60/3 or 200/60/3 574.0 191⁄8 485.8 16 406.4 135⁄8 346.1 118 53.5
60C/AC
A 18 ⁄8
30
160
(2)
1
6
25
FLOW G P M
MOTOR
IN.
10
4
121/122
20
FLANGE SIZE 21⁄2" RPM 3" 1725 3" 1725
20
131
Specifications (121-138 Series) MODEL (1) NUMBER (2) MOTOR 121 60C/AC 1 PH 122 1 ⁄4 HP, 115 V 131 1 ⁄4 HP, 115 V
132
20
A B
TOTAL HEAD – METERS
10
TOTAL HEAD – METERS
A B
5
40 FLOW M /H 3
TOTAL HEAD – FEET
40
FLOW M 3 /H
In-Line Circulators Taco In-Line Circulators are designed to efficiently circulate heated or chilled water in residential or light commercial Hydronic Systems. These circulators may also be used for zoning large installations and are available in bronze or stainless steel construction for domestic hot water applications. In-Line Circulators demonstrate proven performance, dependablity, quiet operation and long lasting performance.
NSF® ≤ .25% Lead Stainless Steel Models Meet California AB 1953 and Vermont Act 193
©Taco Catalog #100-1.2 Supersedes: 04/19/12
Effective Date: 02/26/13 Printed in USA
Submittal Data # 101-155 Supersedes: New
110 Series In-Line Circulators
Effective: 02/01/13
110 Series (110, 111, 112, 113, 120) Red Baron Circulators: Rugged Motor Built to Last • Resilient mounted, split phase motor with built-in overload protector • Equipped with sleeve bearings for quiet operation
3
FLOW (M /H)
Proven Pump Construction • One piece non-ferrous impeller • Stainless steel shaft • Rugged bronze sleeve bearing • Two piece carbon/ceramic seal assembly • Durable one piece spring coupling
TOTAL HEAD (METERS)
TOTAL HEAD (FEET)
Factory Tested • Every circulator is operated before shipment
FLOW (GPM)
Easy, Low-Cost Service • No special tools required • Nationwide parts availability
A
Accessories & Options • Circulators available in: - Stainless Steel (110 thru 120 models) ® • Companion flanges available in: 3⁄4”, 1”, 1-1⁄4”, 1-1⁄2” sizes ® • Shut-off flanges available in: 3⁄4”, 1”, 1-1⁄4” and 1-1/2” sizes • Allows easy isolation and service
B
C
D
Specifications MODEL NUMBER (1)
FLANGE SIZE
MOTOR (2) (115V/60 HZ/1 PH) MAXIMUM TEMP. (3) HP RPM
⁄
⁄
⁄
⁄
⁄ ⁄
⁄
⁄
APPROX. SHIPPING WEIGHT
DIMENSIONS PRESSURE RATING
A IN.
B MM
IN.
C MM
IN.
D MM
IN.
MM LBS. KG
⁄ ⁄
⁄
⁄
⁄ ⁄ ⁄
⁄
⁄ ⁄
⁄
⁄
⁄
⁄ ⁄
⁄ ⁄ ⁄
“” –
121-138 Series In-Line Circulators 121-138 In-Line Cartridge Design Pump Series: Applications Designed to efficiently circulate heated or chilled water in large residential and commercial Hydronic Systems. Ideal for primary-secondary systems, as well as parallel pumping designs. Available in bronze construction for fresh water service.
Features Proven Performance: In-Line Cartridge Design Pumps are backed by years of Taco experience in design and manufacture of circulators. Hundreds of thousands are in service. Dependable, Quiet Operation: In-Line Cartridge Design Pumps offer quiet dependable pumping power and long lasting performance. Ideal for heating and/or air conditioning systems requiring high head performance, pressure boosting, and recirculation systems with relatively low volume. Unique Cartridge Design: Replaceable “cooler running” bearing cartridge extends bearing life. With permanently sealed grease lubricated ball bearings it is virtually maintenance free.
Built to Last Cartridge Bearing Assembly Cartridge design isolates the bearings from the effects of system fluid temperatures which greatly extends bearing life. • Alloy steel shaft • Cupro-Nickel shaft sleeve
Drive Coupling • Rugged flexible rubber construction absorbs angular and parallel misalignmen Rugged Motor • Available in single and three phase, and all standard voltages ...open-drip proof enclosure
• Equipped with sleeve Mechanical Seal bearings for quiet operation • Two piece carbon/ceramic • Resilient mounted seal is standard • Sealide-C/viton available for high • Built-in overload protector on single phase models temperature and aggressive water applications
Body & Flanges • Available in cast iron or bronze • In-Line configuration • Companion flanges provided in 2-1⁄2” or 3”
Factory Tested • Every pump is built to Hydraulic Institute standards and operated before shipment Easy Low-Cost Service • No special tools required
• One cartridge bearing assembly fits all models – replace cartridge only . . . not bracket Impeller • One mechanical seal • Dynamically and fits all models hydraulically balanced • Enclosed type – cast iron or bronze
E
Submittal Data Information 121-138 Series Circulators
15
A B
5
10
15
20
25
30
30
35 133
12
C
TOTAL HEAD – FEET
138
D
133
30
132
20
10
121-138
0
121-138
C
10
40
8
D
0
60
121/122
80
100
20
40
120
140
602
18 ⁄8 1 1
1
10 8 6 4
131
2 80
B
100
120
C MM
B
140
160
IN.
SHIPPING WEIGHT
D
LBS.
KG
403.2 141⁄4 362.0 111⁄8 282.6
MM
IN.
MM
72
32.7
403.2 135⁄8 346.1 111⁄8 282.6
72
32.7
400.1
16
406.4 135⁄8 346.1
95
43.1
457.2
16
406.4 135⁄8 346.1
108
49.0
473.1
16
406.4 135⁄8 346.1
113
51.3
485.8
16
406.4 135⁄8 346.1
118
53.5
When specifying bronze fitted construction, add letter “C” after model number (i.e. 132C)
construction, add letter “B” afterare model number (i.e. 132B). (2) Motors available with other electrical characteristics – consult your Taco representative. ted construction, add letter “C” after model number (i.e. 132C) ther electrical characteristics – consult your Taco representative.
175 150 125
C
D
100
0
100 200 TEMPERATURE (˚F)
40
5
FLOW M 3 /H 10
15
20
175 150 125 100
121-138
0
300
25
30
35
10
133
30
8 132
20
6 4
131
10
121/122
100 200 0 TEMPERATURE20 (˚F)
2
300 40
60
80
100
120
140
160
FLOW G P M
DIMENSIONS
(2)
MODEL (1) NUMBER
FLANGE SIZE
121
21⁄2"
1
122
3"
1
131
3"
1
MOTOR 60C/AC
1 PH
A RPM
IN.
B MM
IN.
C MM
IN.
SHIPPING WEIGHT
D
LBS.
KG
⁄4 HP, 115 V
1725
181⁄8 460.4 157⁄8 403.2 141⁄4 362.0 111⁄8 282.6
72
32.7
⁄4 HP, 115 V
1725
181⁄8 460.4 157⁄8 403.2 135⁄8 346.1 111⁄8 282.6
72
32.7
⁄3 HP, 115 V
1725
191⁄4 489.0 153⁄4 400.1
95
43.1
16
MM
IN.
MM
406.4 135⁄8 346.1
1 ⁄2 HP, 115/230 V Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360 Taco Inc., 1160 Cranston Street. 211⁄2 546.1 18 457.2 16 406.4 135⁄8 346.1 108 49.0 132 1725 or 230/460/60/3 Taco (Canada)3"Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436 or 200/60/3 3 ⁄4 HP, 115/230 V www.taco-hvac.com
133
3"
12
138 TOTAL HEAD – FEET
A B
200 SYSTEM PRESSURE (PSI)
SYSTEM PRESSURE (PSI)
200
PRESSURE – TEMPERATURE RATINGS
or 230/460/60/3 or 200/60/3 1 HP, 115/230 V
1725
221⁄8 562.0 185⁄8 473.1
16
406.4 135⁄8 346.1
113
51.3
TOTAL HEAD – METERS
PRESSURE – TEMPERATURE RATINGS
12
138
DIMENSIONS A
⁄3 HP, 115 19 ⁄4 132V 3" 1725 ⁄2 HP, 115/230 V 211⁄2 1725 or 230/460/60/3 or 200/60/3 3" 133 3 ⁄4 HP, 115/230 V 221⁄8 1725 or 230/460/60/3 or 200/60/3 3" 138 1 HP, 115/230 V 225⁄8 1725 or 230/460/60/3 When specifying all bronze construction, add letter “B” after model number (i.e. 132B). or (1) 200/60/3 1
35
FLOW GP M 121-138
DIMENSIONS SHIPPING 1 PH RPM IN. MM IN. WEIGHT C D 1 1 7 ⁄4 HP, 115 V 18 ⁄ ⁄8 15 1725 8 460.4 MM IN. MM IN. MM IN. MM LBS. KG 1 1 7 ⁄4 HP, 115 V 18 ⁄8 460.4 15 ⁄8 1725 460.4 157⁄8 403.2 141⁄4 362.0 111⁄8 282.6 72 32.7 1 ⁄3 HP, 115 V 1725 1 191⁄4 489.0 153⁄4 7 5 15 ⁄8 403.2 13 ⁄8 346.1 11 ⁄8 282.6 72 460.4 32.7 1 ⁄2 HP, 115/230 V 5 ⁄ 153⁄4 400.1 16 406.4 13 489.0 346.1 95 43.1 1 8 21 ⁄2 546.1 18 1725 or 230/460/60/3 or 200/60/3 18 457.2 16 406.4 135⁄8 346.1 108 49.0 3546.1 ⁄4 HP, 115/230 V 221⁄8 562.0 185⁄8 1725 or 230/460/60/3 or 200/60/3 562.0 185⁄8 473.1 16 406.4 135⁄8 346.1 113 51.3 1 HP, 115/230 V 225⁄8 574.0 191⁄8 1725 or 230/460/60/3 or 200/60/3 574.0 191⁄8 485.8 16 406.4 135⁄8 346.1 118 53.5
60C/AC
A 18 ⁄8
30
160
(2)
1
6
25
FLOW G P M
MOTOR
IN.
10
4
121/122
20
FLANGE SIZE 21⁄2" RPM 3" 1725 3" 1725
20
131
Specifications (121-138 Series) MODEL (1) NUMBER (2) MOTOR 121 60C/AC 1 PH 122 1 ⁄4 HP, 115 V 131 1 ⁄4 HP, 115 V
132
20
A B
TOTAL HEAD – METERS
10
TOTAL HEAD – METERS
A B
5
40 FLOW M /H 3
TOTAL HEAD – FEET
40
FLOW M 3 /H
