infinity
SUSTAINABLE
upholstery
infinity WIDTH 54" (137 cm) SHOWN RAILROADED CONTENTS 100% polyester RECYCLED CONTENT 15% post-consumer, 28% pre-consumer FINISH Crypton® REPEAT 1.69" (4.5 cm) horizontal repeat, 16.95" (43 cm) vertical repeat ABRASION RESISTANCE ASTM D4157: 90,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements ADDITIONAL PRODUCT ATTRIBUTES Microbial resistant WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE W/S (water-based and/or solvent-based cleaners) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean with a mild solvent, an upholstery shampoo or the foam from a mild detergent. When using a solvent or dry-cleaning product, follow instructions carefully and clean only in a well-ventilated room. With either method, pretest a small area before proceeding. CUSTOM COLORS AVAILABLE MADE IN THE USA
© 2014 Wall Source LLC Crypton® is a registered trademark of Crypton, Inc.
upholstery
infinity WIDTH 54" (137 cm) SHOWN RAILROADED CONTENTS 100% polyester RECYCLED CONTENT 15% post-consumer, 28% pre-consumer FINISH Crypton® REPEAT 1.69" (4.5 cm) horizontal repeat, 16.95" (43 cm) vertical repeat ABRASION RESISTANCE ASTM D4157: 90,000 double rubs FIRE TEST
Cal TB 117: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements ADDITIONAL PRODUCT ATTRIBUTES Microbial resistant WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE W/S (water-based and/or solvent-based cleaners) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean with a mild solvent, an upholstery shampoo or the foam from a mild detergent. When using a solvent or dry-cleaning product, follow instructions carefully and clean only in a well-ventilated room. With either method, pretest a small area before proceeding. CUSTOM COLORS AVAILABLE MADE IN THE USA
© 2014 Wall Source LLC Crypton® is a registered trademark of Crypton, Inc.
