installation guide - Displays2go
INSTALLATION GUIDE Item No.:LTB8MLT4Q
CABLE
Thank you for choosing our product Warning This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children ! 1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced . 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.
-8-
TV Size Range: 10 " ~ 24 " Max load capacity of each TV plate : 8Kg/17.6lbs Integrated Cable management CAUTION Please read this guide before installation. Ensure the correct installation. Keep away from high frequency or power equipment to avoid disturbance.Choose desk to put this product. We can not be responsible for any damage caused by wrong installation.
Hardware Kit:
Part 5-Attaching TV plate to screen C
3
1
Center TV plate on back of the screen and align the sixteen mounting holes. Select screws(A,B). Attach TV plate to screen using sixteen selected screws (A,B). Tighten screws firmly. Do not overtighten .
E
4 14 15 16 17
19 18 5 10 11
13
12
9
6
8
A, B
2
A
B
7 D
-2-
ID 1 2
Qty 1 4
3 4 5
2 2 2
Adjustable part with button Fixed wreath Cable cover 1
6 7 8 9 10
1 1 8 4 4
Tube Bottom support ST2.9X10 bolt Lateral plastic Knob 2
11 12
4 2
8-φ8.5xφ20x2 washer Long steel arm
Description Tube Cover TV plate
ID 13 14 15
Qty 4 4 4
16 17 18
4 4 4
8-φ6.4xφ18x1.5 washer M6×14mm bolt Cable cover 2
19 A B
4 16 16
M4×12mm bolt M4×12mm bolt M5×12mm bolt
C D E
1 1 2
M4×10mm bolt M10×20mm bolt 3X3,6X6mm Wrench
Description Plastic cover M5 washer M4 nut
-7-
Part 4-F 4-Fixed ixed Bottom support and tube cover
Part 1-F 1-Fixed ixed Long steel arm
First fixed the bottom support (7) on the tube and use (D) by 6X6mm wrench (E) to make it tighten.Put on the tube cover (1) and use (C) by 3X3mm wrench (E) to make it tighten.Install the Cable cover (5) onto the tube(6).
Connect the Long steel arm (12) and the adjustable part (3) with four washers(16) and four bolts(17).Then install the cable cover(18),using four bolts (19) and four washers (14),fix it onto the left and right side of the long steel arm(12) with nut (15).At last,install the plastic cover(13).
1 C
19
3
E(3X3mm) 14
18 16
17
15
12
6 5
D
13 7
E(6X6mm)
-6-
-3-
Part 2-Install TV plate and Lateral plastic
Part 3-Fixed 3-F ixed wreath
First of all,put the TV plate onto the Long steel arm(12),fixed with washer(11) and knob(10),then install the Lateral plastic (9) with the bolt (8).
Put the wreach (4) on to the tube (6),adjust to the suitable position,then fix it with the bolt,and then put the adjustable part with button onto the tube too,fix the button at last.
2 9
NOTE: 4
8
6
11 12
-4-
10
-5-
CABLE
Thank you for choosing our product Warning This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children ! 1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced . 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.
-8-
TV Size Range: 10 " ~ 24 " Max load capacity of each TV plate : 8Kg/17.6lbs Integrated Cable management CAUTION Please read this guide before installation. Ensure the correct installation. Keep away from high frequency or power equipment to avoid disturbance.Choose desk to put this product. We can not be responsible for any damage caused by wrong installation.
Hardware Kit:
Part 5-Attaching TV plate to screen C
3
1
Center TV plate on back of the screen and align the sixteen mounting holes. Select screws(A,B). Attach TV plate to screen using sixteen selected screws (A,B). Tighten screws firmly. Do not overtighten .
E
4 14 15 16 17
19 18 5 10 11
13
12
9
6
8
A, B
2
A
B
7 D
-2-
ID 1 2
Qty 1 4
3 4 5
2 2 2
Adjustable part with button Fixed wreath Cable cover 1
6 7 8 9 10
1 1 8 4 4
Tube Bottom support ST2.9X10 bolt Lateral plastic Knob 2
11 12
4 2
8-φ8.5xφ20x2 washer Long steel arm
Description Tube Cover TV plate
ID 13 14 15
Qty 4 4 4
16 17 18
4 4 4
8-φ6.4xφ18x1.5 washer M6×14mm bolt Cable cover 2
19 A B
4 16 16
M4×12mm bolt M4×12mm bolt M5×12mm bolt
C D E
1 1 2
M4×10mm bolt M10×20mm bolt 3X3,6X6mm Wrench
Description Plastic cover M5 washer M4 nut
-7-
Part 4-F 4-Fixed ixed Bottom support and tube cover
Part 1-F 1-Fixed ixed Long steel arm
First fixed the bottom support (7) on the tube and use (D) by 6X6mm wrench (E) to make it tighten.Put on the tube cover (1) and use (C) by 3X3mm wrench (E) to make it tighten.Install the Cable cover (5) onto the tube(6).
Connect the Long steel arm (12) and the adjustable part (3) with four washers(16) and four bolts(17).Then install the cable cover(18),using four bolts (19) and four washers (14),fix it onto the left and right side of the long steel arm(12) with nut (15).At last,install the plastic cover(13).
1 C
19
3
E(3X3mm) 14
18 16
17
15
12
6 5
D
13 7
E(6X6mm)
-6-
-3-
Part 2-Install TV plate and Lateral plastic
Part 3-Fixed 3-F ixed wreath
First of all,put the TV plate onto the Long steel arm(12),fixed with washer(11) and knob(10),then install the Lateral plastic (9) with the bolt (8).
Put the wreach (4) on to the tube (6),adjust to the suitable position,then fix it with the bolt,and then put the adjustable part with button onto the tube too,fix the button at last.
2 9
NOTE: 4
8
6
11 12
-4-
10
-5-
