I’M NOT A STICKER, DON’T TREAT ME LIKE ONE!
ADHESION PROMOTER KIT Primer sticks aid adhesion of Stompgrip Traction Products to Powersport surfaces.
1. Follow surface preparation instructions included with your Stompgrip kit. 2. Crush primer stick at the dot on the tube with your fingers. 3. Apply primer to bike/vehicle surfaces that line up with the areas where your Stompgrip pieces will go, especially the edges. 4. Make sure to allow all cleaner and primer fumes to evaporate and dry completely before applying the product or the adhesive can be contaminated. Use a hair dryer to carefully warm up the vehicle surfaces and Stompgrip between 70-100 degrees farenheight (21-38 degrees celcius) for best results. 5. Install the product per the instructions included with your Stompgrip kit. 6. Re-heat and apply pressure. Inc.
Web: www.stompgrip.com E-mail: [email protected]
15431 Chemical Ln. Huntington Beach California 92649 Toll Free: 888-612-5240 Phone: 714-894-9388 Fax: 714-894-4648