Installation Instructions - Nora Lighting
Installation Instructions specialty LIGHTING
***READ PRIOR TO ATTEMPTING INSTALLATION***
- 24V led lightbar SILK SBC
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN.
Always turn off main power before installation
Item# NULB-806LED NULB-812LED NULB-824LED NULB-836LED NULB-848LED
PLEASE READ: Important information before installation • Always turn off power prior to installation or replacement • Risk of electric shock. Do not use any connection pins to touch any electrical conductors. • Do not press directly on the top cover (lens), as it may cause damage • For indoor use only. Do not use the product in a potentially combustive environment or outdoors.
Description 6” LED SILK SBC Lightbar 90+CRI 12” LED SILK SBC Lightbar 90+CRI 24” LED SILK SBC Lightbar 90+CRI 36” LED SILK SBC Lightbar 90+CRI 48” LED SILK SBC Lightbar 90+CRI
Installation Instructions 1. Mark the mounting position on the surface to align the LED Lightbar. 2. Align and secure the mounting clips to the surface. 3. Gently push the LED Lightbar into the mounting clips. 4. Connect LED Lightbars to create a continous row by using seamless type connectors (A) or interconnects (C). Be careful not to go over the wattage limit of the driver when connecting LED Lightbars. 5. Plug-in power feed (B) into the appropriate side of the LED Lightbar (1 slot). 6. Check the connections and turn the power on.
LIGHTBAR SILK INSTALLATION
NAL-845
A
NAL-800
B
NAL-808W NAL-808/72W NAL-812TBW NAL-872TB NAL-810/12 NAL-810/72
NAL-801 NAL-880
NAL-809
Cement surface NAL-807 NAL-807/72 NAL-811 NAL-811/72
NAL-802 NAL-845
NAL-811
NAL-801
NAL-880
NAL-809
A
Wood laminate
B
LIGHTBAR SILK WIRING DIAGRAM INPU T: AC100-277V/50-60H z INPU T: AC100-277V/50-60H z
AC 60W POWER
AC 96W POWER
DC 24V
+ -
+ -
Lightbar
DC 24V
+ -
+ -
Lightbar
Lightbar
Lightbar 60W Max
Lightbar
Lightbar 96W Max
• Pleas e make sure that the total power of the run does not exceed the rating of the drive r 6505 Gayhart St., Commerce, CA 90040 www.NoraLighting.com
Page 1 of 1
***READ PRIOR TO ATTEMPTING INSTALLATION***
- 24V led lightbar SILK SBC
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN.
Always turn off main power before installation
Item# NULB-806LED NULB-812LED NULB-824LED NULB-836LED NULB-848LED
PLEASE READ: Important information before installation • Always turn off power prior to installation or replacement • Risk of electric shock. Do not use any connection pins to touch any electrical conductors. • Do not press directly on the top cover (lens), as it may cause damage • For indoor use only. Do not use the product in a potentially combustive environment or outdoors.
Description 6” LED SILK SBC Lightbar 90+CRI 12” LED SILK SBC Lightbar 90+CRI 24” LED SILK SBC Lightbar 90+CRI 36” LED SILK SBC Lightbar 90+CRI 48” LED SILK SBC Lightbar 90+CRI
Installation Instructions 1. Mark the mounting position on the surface to align the LED Lightbar. 2. Align and secure the mounting clips to the surface. 3. Gently push the LED Lightbar into the mounting clips. 4. Connect LED Lightbars to create a continous row by using seamless type connectors (A) or interconnects (C). Be careful not to go over the wattage limit of the driver when connecting LED Lightbars. 5. Plug-in power feed (B) into the appropriate side of the LED Lightbar (1 slot). 6. Check the connections and turn the power on.
LIGHTBAR SILK INSTALLATION
NAL-845
A
NAL-800
B
NAL-808W NAL-808/72W NAL-812TBW NAL-872TB NAL-810/12 NAL-810/72
NAL-801 NAL-880
NAL-809
Cement surface NAL-807 NAL-807/72 NAL-811 NAL-811/72
NAL-802 NAL-845
NAL-811
NAL-801
NAL-880
NAL-809
A
Wood laminate
B
LIGHTBAR SILK WIRING DIAGRAM INPU T: AC100-277V/50-60H z INPU T: AC100-277V/50-60H z
AC 60W POWER
AC 96W POWER
DC 24V
+ -
+ -
Lightbar
DC 24V
+ -
+ -
Lightbar
Lightbar
Lightbar 60W Max
Lightbar
Lightbar 96W Max
• Pleas e make sure that the total power of the run does not exceed the rating of the drive r 6505 Gayhart St., Commerce, CA 90040 www.NoraLighting.com
Page 1 of 1
