installation of sti-7510 & sti-7511 polycarbonate
Safety Technology International, Inc.
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England Tel: 44 (0) 1527 520 999 • Fax: 44 (0) 1527 501 999 E-mail: [email protected] • Web: www.sti-europe.com
STI-7510A, STI-7510A-OW, STI-7511A, STI-7511A-OW
STI-7510B, STI-7511B
SEALED BACK BOX WITH EXTERNAL MOUNTING
SEALED BACK BOX WITH EXTERNAL MOUNTING AND MOLDED DOUBLE GANG OUTLET BOX
19033 ANCHOR (4) PROVIDED 6297T EXTERNAL MOUNTING TABS (PROVIDED ON A, B, C & F MODELS)
KEY LOCK SHOWN
THUMB LOCK SHOWN IF CONDUIT HUB IS NEEDED ORDER SUB- 6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4 in. RIGID DIE CAST
07522 LID AND FRAME ASSEMBLY
1.74 in.(44mm) DEPTH
4.59 in.(116mm) DEPTH
SCREW #8-32 x 3/8 in. (4) PROVIDED
MOUNTING TABS AND FASTENERS
MOUNTING TABS AND FASTENERS
STI-7510C, STI-7511C 19013 SCREW #10 x 1 1/2 in. (4) PROVIDED
629761 GASKET LID ASSEMBLY TO BACK BOX (ALL MODELS)
6297221 GASKET LID TO FRAME (ALL MODELS)
KEY LOCK SHOWN STI-3002 GASKET
IF CONDUIT HUB IS NEEDED ORDER SUB-6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4 in. RIGID DIE CAST
STI-7510 with Key Lock STI-7511 with Thumb Lock STI-7510/11-OW White Back Box
2.95 in.(75mm) DEPTH
MOUNTING TABS & FASTENERS
1. Insert the (4) mounting tabs into the back box slots with A, B, C, and F models. 2. Using the installed mounting tab holes or internal mounting bosses as a template, mark and drill (4) 1/4 in. diameter holes and complete installation as shown.
STI-7510E, STI-7511E OPEN BACK BOX WITH INTERNAL MOUNTING 6297316 GASKET
CLEANING INSTRUCTIONS To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naptha (do not use razor blades or gasoline). Then wash and rinse.
KEY LOCK SHOWN
6297316 GASKET
MOUNTING FASTENERS
INSTALLATION INSTRUCTIONS
Rinse with water to remove abrasive dust and dirt. Wash with soap or mild detergent, using a soft cloth. (Do not scrub or use brushes or abrasives.) Rinse once more, then dry using a soft cloth or chamois.
STI-7510D, STI-7511D OPEN BACK BOX WITH INTERNAL MOUNTING
OPEN BACK BOX WITH EXTERNAL MOUNTING
THUMB LOCK SHOWN
3.98 in.(101mm) DEPTH
SURFACE MOUNT CONDUIT INSERTS USE WHERE NEEDED (1 OF EACH PROVIDED)
STI-7510F, STI-7510F-OW, STI-7511F, STI-7511F-OW SEALED BACK BOX WITH EXTERNAL MOUNTING KEY LOCK SHOWN IF CONDUIT HUB IS NEEDED ORDER SUB-6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4
MOUNTING FASTENERS
2.79 in.(71mm) DEPTH
2.20 in.(56mm) DEPTH
MOUNTING TABS AND FASTENERS
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI-7510 & STI-7511 POLYCARBONATE ENCLOSURES
All specifications and information shown were current as of publication, and are subject to change without notice. 7510/11IS AUG2014
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England Tel: 44 (0) 1527 520 999 • Fax: 44 (0) 1527 501 999 E-mail: [email protected] • Web: www.sti-europe.com
STI-7510A, STI-7510A-OW, STI-7511A, STI-7511A-OW
STI-7510B, STI-7511B
SEALED BACK BOX WITH EXTERNAL MOUNTING
SEALED BACK BOX WITH EXTERNAL MOUNTING AND MOLDED DOUBLE GANG OUTLET BOX
19033 ANCHOR (4) PROVIDED 6297T EXTERNAL MOUNTING TABS (PROVIDED ON A, B, C & F MODELS)
KEY LOCK SHOWN
THUMB LOCK SHOWN IF CONDUIT HUB IS NEEDED ORDER SUB- 6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4 in. RIGID DIE CAST
07522 LID AND FRAME ASSEMBLY
1.74 in.(44mm) DEPTH
4.59 in.(116mm) DEPTH
SCREW #8-32 x 3/8 in. (4) PROVIDED
MOUNTING TABS AND FASTENERS
MOUNTING TABS AND FASTENERS
STI-7510C, STI-7511C 19013 SCREW #10 x 1 1/2 in. (4) PROVIDED
629761 GASKET LID ASSEMBLY TO BACK BOX (ALL MODELS)
6297221 GASKET LID TO FRAME (ALL MODELS)
KEY LOCK SHOWN STI-3002 GASKET
IF CONDUIT HUB IS NEEDED ORDER SUB-6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4 in. RIGID DIE CAST
STI-7510 with Key Lock STI-7511 with Thumb Lock STI-7510/11-OW White Back Box
2.95 in.(75mm) DEPTH
MOUNTING TABS & FASTENERS
1. Insert the (4) mounting tabs into the back box slots with A, B, C, and F models. 2. Using the installed mounting tab holes or internal mounting bosses as a template, mark and drill (4) 1/4 in. diameter holes and complete installation as shown.
STI-7510E, STI-7511E OPEN BACK BOX WITH INTERNAL MOUNTING 6297316 GASKET
CLEANING INSTRUCTIONS To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naptha (do not use razor blades or gasoline). Then wash and rinse.
KEY LOCK SHOWN
6297316 GASKET
MOUNTING FASTENERS
INSTALLATION INSTRUCTIONS
Rinse with water to remove abrasive dust and dirt. Wash with soap or mild detergent, using a soft cloth. (Do not scrub or use brushes or abrasives.) Rinse once more, then dry using a soft cloth or chamois.
STI-7510D, STI-7511D OPEN BACK BOX WITH INTERNAL MOUNTING
OPEN BACK BOX WITH EXTERNAL MOUNTING
THUMB LOCK SHOWN
3.98 in.(101mm) DEPTH
SURFACE MOUNT CONDUIT INSERTS USE WHERE NEEDED (1 OF EACH PROVIDED)
STI-7510F, STI-7510F-OW, STI-7511F, STI-7511F-OW SEALED BACK BOX WITH EXTERNAL MOUNTING KEY LOCK SHOWN IF CONDUIT HUB IS NEEDED ORDER SUB-6297B20 HUB KIT, GASKET AND FASTENERS INCLUDED NOTE: SUB KIT IS 3/4
MOUNTING FASTENERS
2.79 in.(71mm) DEPTH
2.20 in.(56mm) DEPTH
MOUNTING TABS AND FASTENERS
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI-7510 & STI-7511 POLYCARBONATE ENCLOSURES
All specifications and information shown were current as of publication, and are subject to change without notice. 7510/11IS AUG2014
