instructions - Displays2go
Sit-Stand counter-balance LCD Wall Mount
8
S=3mm S=5mm
A
S=3mm
Vertical slight adjustment
S=5mm
NOTE: Turn clockwise to reduce tension for lighter monitors and counter-clockwise to increase tension for heavier monitors.
Use a hex wrench to adjust the height tension of the gas spring arm, to keep different weight of monitors still at any position.
9
S=4mm S=5mm
A
S=4mm
Load M5x6
13” - 24”
5kgs/11lbs
VESA 75x75, 100x100
G
Use hex wrench to adjust the tension of keyboard tray if needed
Tilt
-15°/+15°
Installation
Attach the mouse holder for well management
Keyboard tray can be folded up to save space. 07
Swivel
Rotate
180°
360°
INSTRUCTIONS
WARNING STATEMENTS 7a
Warning
velcro
E
Prior to the installation of this product, the installation instruction must be read and completely understood. Failure to do so may result in personal injury, property damage or voiding of factory warranty. Do not install on a structure that is prone to vibration, movement or chance of impact. Reinforce the structure as required before installation. Recommended mounting surfaces: Wooden studs or solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware. Pay attention to the weight capacity of the mount. Exceeding the limitation can result in function unworkable or even serious personal injury and property damage. Never operate the mount if parts are missing or damaged. Contact your local service center for warranty service.
Use velcros to fix the keyboard from slipping.
Use cable cover to manage small number of cables.
7b
PRODUCT LINE GRAPH
Cable tie velcro
E
Insert
640mm / 25.2” 341.3mm / 13.4” 15° 15°
360° 15°
15°
Use velcros to fix the keyboard from slipping.
180°
183.5mm / 7.2”
70mm / 7.2” 230mm / 9.1”
Pull out
+/-45° 6.4”
m/2
670m
01
Use cable tie to manage large number of cables.
06
TOOLS REQUIRED NOT INCLUDED
5
X
M4x30 M4x12
TV
TV
TV
TV
13X5.5X16.5
A
PARTS INCLUDED
OR
A M4x12 (x8)
Flush surface installation: Install 4 screws through faceplate to monitor via mounting holes.
B
C
M8x60(x1)
(x2)
M8(x1)
13x8x9.5(x1)
(x1)
M4x30 (x8)
13X5.5X16.5 (x8)
M6x8 (x3)
M6x15 (x4) M8x12 (x4)
F
G
Φ20x8x1(x4) (x1)
S=3mm (x1) S=4mm (x1) S=5mm (x1)
6
M8x15(x1)
(x1)
E
Recessed surface installation: Put 4 spacers between faceplate and monitor. Install 4 screws through faceplate, spacers to monitor via mounting holes.
D
(x2)
Φ10x50 (x4)
(x5)
(x1)
M8x12
D
H
I
J
K L (x2)
Insert the monitor into the head slot
M
N
O
Lift the aluminum profile along with the head slot and fix on the connecting part. 05
M5x6(x1)
(x1)
M8x60 (x4)
02
1
3
30mm(1.2”)
M6x50
3mm (0.12”)
17x8.4x1.2
B
S=5mm
E
S=5mm
C
Lift the spring arm and put it on the wall plate.
Insert the connecting part to proper height and fix it.
Take off the plastic covers
Use a pencil to mark the place for mounting. Make sure the wall structure can support the weight of TV along with the mount. Avoid dead center for mounting holes.
2
Connect the aluminum profile component with the gas spring arm.
4
60mm(2.4”)
10mm (0.39”)
D
E
S=5mm
Use a pencil to mark the place for mounting. Make sure the wall structure can support the weight of monitor along with the mount. Avoid electricity for mounting holes. 03
Connect the keyboard tray with the aluminum profile component. 04
8
S=3mm S=5mm
A
S=3mm
Vertical slight adjustment
S=5mm
NOTE: Turn clockwise to reduce tension for lighter monitors and counter-clockwise to increase tension for heavier monitors.
Use a hex wrench to adjust the height tension of the gas spring arm, to keep different weight of monitors still at any position.
9
S=4mm S=5mm
A
S=4mm
Load M5x6
13” - 24”
5kgs/11lbs
VESA 75x75, 100x100
G
Use hex wrench to adjust the tension of keyboard tray if needed
Tilt
-15°/+15°
Installation
Attach the mouse holder for well management
Keyboard tray can be folded up to save space. 07
Swivel
Rotate
180°
360°
INSTRUCTIONS
WARNING STATEMENTS 7a
Warning
velcro
E
Prior to the installation of this product, the installation instruction must be read and completely understood. Failure to do so may result in personal injury, property damage or voiding of factory warranty. Do not install on a structure that is prone to vibration, movement or chance of impact. Reinforce the structure as required before installation. Recommended mounting surfaces: Wooden studs or solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware. Pay attention to the weight capacity of the mount. Exceeding the limitation can result in function unworkable or even serious personal injury and property damage. Never operate the mount if parts are missing or damaged. Contact your local service center for warranty service.
Use velcros to fix the keyboard from slipping.
Use cable cover to manage small number of cables.
7b
PRODUCT LINE GRAPH
Cable tie velcro
E
Insert
640mm / 25.2” 341.3mm / 13.4” 15° 15°
360° 15°
15°
Use velcros to fix the keyboard from slipping.
180°
183.5mm / 7.2”
70mm / 7.2” 230mm / 9.1”
Pull out
+/-45° 6.4”
m/2
670m
01
Use cable tie to manage large number of cables.
06
TOOLS REQUIRED NOT INCLUDED
5
X
M4x30 M4x12
TV
TV
TV
TV
13X5.5X16.5
A
PARTS INCLUDED
OR
A M4x12 (x8)
Flush surface installation: Install 4 screws through faceplate to monitor via mounting holes.
B
C
M8x60(x1)
(x2)
M8(x1)
13x8x9.5(x1)
(x1)
M4x30 (x8)
13X5.5X16.5 (x8)
M6x8 (x3)
M6x15 (x4) M8x12 (x4)
F
G
Φ20x8x1(x4) (x1)
S=3mm (x1) S=4mm (x1) S=5mm (x1)
6
M8x15(x1)
(x1)
E
Recessed surface installation: Put 4 spacers between faceplate and monitor. Install 4 screws through faceplate, spacers to monitor via mounting holes.
D
(x2)
Φ10x50 (x4)
(x5)
(x1)
M8x12
D
H
I
J
K L (x2)
Insert the monitor into the head slot
M
N
O
Lift the aluminum profile along with the head slot and fix on the connecting part. 05
M5x6(x1)
(x1)
M8x60 (x4)
02
1
3
30mm(1.2”)
M6x50
3mm (0.12”)
17x8.4x1.2
B
S=5mm
E
S=5mm
C
Lift the spring arm and put it on the wall plate.
Insert the connecting part to proper height and fix it.
Take off the plastic covers
Use a pencil to mark the place for mounting. Make sure the wall structure can support the weight of TV along with the mount. Avoid dead center for mounting holes.
2
Connect the aluminum profile component with the gas spring arm.
4
60mm(2.4”)
10mm (0.39”)
D
E
S=5mm
Use a pencil to mark the place for mounting. Make sure the wall structure can support the weight of monitor along with the mount. Avoid electricity for mounting holes. 03
Connect the keyboard tray with the aluminum profile component. 04
