Instructions for SimplicityTouch ST-700 Gen 3 Disable Wireless

Instructions for SimplicityTouch ST-700 Gen 3 Disable Wireless Network Interface Topics Covered: Disable wireless interface

Model Numbers Covered: 70” ST-700, Generation 3 Last Update:12/29/2016 e: [email protected]

TOOLS REQUIRED: None.

ESTIMATED TIME REQUIRED: Less than 5 min.

Disable wireless interface If using the wired connection you may wish to completely disable the wireless interface of the panel. Follow these instructions to disable the wireless interface.

STEP REFERENCE IMAGE

INSTRUCTIONS

1

Power on panel and then press the home button.

2

Select Settings. The default password is 0 0 0 0.

It is recommended that you change the default password.

STEP REFERENCE IMAGE

INSTRUCTIONS

3

Select Network.

4

Select Router Settings.

STEP REFERENCE IMAGE

INSTRUCTIONS

5

Login to router.

Default usernmae is: admin With password left blank.

6

Select Advanced Mode from left menu.

STEP REFERENCE IMAGE

INSTRUCTIONS

7

Select 5G CONFIG from top menu. Then check the Disable Wireless Lan Interface checkbox. Then click Apply and choose to Reboot Later.

STEP REFERENCE IMAGE

INSTRUCTIONS

8

Select 2.4G CONFIG from top menu. Then check the Disable Wireless Lan Interface checkbox. Then click Apply and choose to Reboot Now.

STEP REFERENCE IMAGE

INSTRUCTIONS

9

When router reboots it will show the status page and the 2.4 and 5GHz wireless configuration information will be removed from status screen indicating that the wireless interface is disabled. END