Intense Pulsed Light Sintering of CH3NH3PbI3 Solar Cells
Intense Pulsed Light Sintering of CH3NH3PbI3 Solar Cells Brandon W. Laverya,b, Sudesh Kumaria, Hannah Konermanna,c, Gabriel L. Drapera,b, Joshua Spurgeona, and Thad Druffela* a- Conn Center for Renewable Energy Research, University of Louisville, Louisville, KY USA b- Department of Chemical Engineering c- Department of Chemistry *- Corresponding author, [email protected]
S-1
Figure S1. Device architecture of the perovskite solar cell (glass/FTO/bl-TiO2/mp-TiO2perovskite nanocomposite layer/Spiro-MeOTAD/Gold.
Figure S2. Original SEM cross-sectional images of perovskite without color after a) hot plate annealing, and after b) IPL sintering.
S-2
S-1
Figure S1. Device architecture of the perovskite solar cell (glass/FTO/bl-TiO2/mp-TiO2perovskite nanocomposite layer/Spiro-MeOTAD/Gold.
Figure S2. Original SEM cross-sectional images of perovskite without color after a) hot plate annealing, and after b) IPL sintering.
S-2
