iPad 2 GSM LCD Replacement

iPad 2 GSM LCD Replacement

iPad 2 GSM LCD Replacement Moving LCD out of the way to remove random internal components. Internal Prerequisite.

Written By: Walter Galan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

iPad 2 GSM LCD Replacement

INTRODUCTION Moving LCD out of the way to remove random internal components. Internal Prerequisite.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

iPad 2 GSM LCD Replacement

Step 1 — LCD 

Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.

Step 2



Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.



Lay the LCD on the front panel as seen in the second picture.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

iPad 2 GSM LCD Replacement This document was last generated on 2017-06-18 07:58:41 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4