iPad 4 CDMA Logic Board Connectors Replacement
iPad 4 CDMA Logic Board Connectors Replacement
iPad 4 CDMA Logic Board Connectors Replacement Prereq only.
Written By: Walter Galan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
iPad 4 CDMA Logic Board Connectors Replacement
INTRODUCTION Prereq only.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
iPad 4 CDMA Logic Board Connectors Replacement
Step 1 — Logic Board Connectors
Disconnect the following connectors from their respective sockets on the logic board:
Wi-Fi antenna cable
Speaker connector cable.
Dock/Lightning connector cable.
There may be a piece of black tape covering this connector. Remove it with tweezers.
Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-10-06 12:27:29 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
iPad 4 CDMA Logic Board Connectors Replacement Prereq only.
Written By: Walter Galan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
iPad 4 CDMA Logic Board Connectors Replacement
INTRODUCTION Prereq only.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
iPad 4 CDMA Logic Board Connectors Replacement
Step 1 — Logic Board Connectors
Disconnect the following connectors from their respective sockets on the logic board:
Wi-Fi antenna cable
Speaker connector cable.
Dock/Lightning connector cable.
There may be a piece of black tape covering this connector. Remove it with tweezers.
Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-10-06 12:27:29 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
