iPhone 6 Plus Lightning Connector and Headphone Jack Cable
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement Prereq only for rear case.
撰写者: Walter Galan
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
介绍 Prereq only for rear case.
工具: iOpener (1) iFixit Opening Picks set of 6 (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 1 — Lightning Connector and Headphone Jack Cable
The next step requires peeling up the Lightning connector and headphone jack cable that is affixed to the inside of the rear case with mild adhesive. We highly recommend using an iOpener on the lower backside of the rear case to soften the adhesive.
步骤 2
Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case.
Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 3
Insert the pick underneath the right bottom corner of the Lightning connector and headphone jack cable.
步骤 4
Run the opening pick across the top of Lightning connector and headphone jack cable to loosen the adhesive securing it to the rear case.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 5
Lift and remove the Lightning connector and headphone jack cable assembly out of the iPhone.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-19 11:53:25 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement Prereq only for rear case.
撰写者: Walter Galan
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
介绍 Prereq only for rear case.
工具: iOpener (1) iFixit Opening Picks set of 6 (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 1 — Lightning Connector and Headphone Jack Cable
The next step requires peeling up the Lightning connector and headphone jack cable that is affixed to the inside of the rear case with mild adhesive. We highly recommend using an iOpener on the lower backside of the rear case to soften the adhesive.
步骤 2
Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case.
Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 3
Insert the pick underneath the right bottom corner of the Lightning connector and headphone jack cable.
步骤 4
Run the opening pick across the top of Lightning connector and headphone jack cable to loosen the adhesive securing it to the rear case.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 5 页
iPhone 6 Plus Lightning Connector and Headphone Jack Cable Replacement
步骤 5
Lift and remove the Lightning connector and headphone jack cable assembly out of the iPhone.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-19 11:53:25 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 5 页
