IS-525-P2 Plastic Bend Support Bulk is 1-up 6-10 - Sioux Chief
Plastic Bend Support Instruction Sheet
1
Using nails or screws, install plastic elbow directly to stud.
2
3
Insert end of tube into top ‘nose’ of plastic bend support.
Holding opposite end of tube, guide tube through radius and around small hook on ‘tail’ end of the bend support.
Using longer screws, two plastic elbows may be stacked against one side of the stud.
Two plastic elbows may be installed to straddle a stud for hot and cold supply.
4
Installation complete.
Plastic elbow may be installed on either side of stud, with flexible supply tube from above or below.
1-800-821-3944 • www.siouxchief.com #IS-525-P2 ©2010 SIOUX CHIEF MFG.
1
Using nails or screws, install plastic elbow directly to stud.
2
3
Insert end of tube into top ‘nose’ of plastic bend support.
Holding opposite end of tube, guide tube through radius and around small hook on ‘tail’ end of the bend support.
Using longer screws, two plastic elbows may be stacked against one side of the stud.
Two plastic elbows may be installed to straddle a stud for hot and cold supply.
4
Installation complete.
Plastic elbow may be installed on either side of stud, with flexible supply tube from above or below.
1-800-821-3944 • www.siouxchief.com #IS-525-P2 ©2010 SIOUX CHIEF MFG.
